How about some pics of bagged C-10's - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 02-10-2009, 05:51 PM

Sweet!

Spray-Bomb · 02-10-2009, 07:06 PM

Super cool

Mike J · 02-10-2009, 07:18 PM

oldnslow, that thing is sick man! I like it.

lbrtzmr · 02-10-2009, 07:43 PM

mamalona 72

crawdadfox · 02-10-2009, 07:48 PM

WOW!!! Those wheels look GINORMOUS!! Thats a bad a$$ truck!!

Throwback · 04-06-2009, 01:28 AM

Here is my 84 C20 Crew Cab tuckin 22 KMC ss Black with Chrome lip in the front and 24inch KMC ss Black with chrome lip. The bed is in the works and once the truck is COMPLETELY finished, I will throw up a build thread on what I have done since I bought it. These pics are from Scrapin the Coast 08.

72 SHORTBED 7.0 · 05-05-2009, 02:23 PM

Quote:

Originally Posted by lbrtzmr

mamalona 72

Nice looking G ride any more info on this truck

p8ntballer1911 · 02-11-2009, 09:30 AM

What wheels are those? That truck is badass

oldnslow · 02-11-2009, 10:30 AM

Thanks for the great responses! here's some info on the truck. It's a bagged 68 short/wide with a 12 bolt rear end, the axles machined and drilled to 5 X4.75" pattern and fitted with disc brakes, it is located by a triangulated 4 bar. The stock front cross member was raised 1", it uses stock upper and lower control arms with S10 drop spindles and a BRT rack and pinion. The frame has a "bridge" in the back, it is fully boxed and uses tubular center cross members and trans mount, the body mounts were lowered 1". The engine is a Gen 5 454 with Edelbrock intake and Holley carb, the trans is a 700R4. The body was stripped to bare metal, cab corners and 1 rocker were replaced, the original floor was modified with a big tunnel to accommodate the raised engine and trans and the 1" body drop, a flat firewall was also installed. The current project is the bed, we raised the front floor section 4" and notched the cross members for drive shaft clearance. the tubs are under construction. i will post more pictures when we have finished them. Here's a link to more pix:http://s598.photobucket.com/albums/t...view=slideshow

gringoloco · 02-11-2009, 11:10 AM

Nice work oldnslow

How did you make the S10 spindles work? What is your opinion of the Toy hinges? Sturdy enough?

dan468 · 02-11-2009, 11:32 AM

What kind of toyota are they from?

oldnslow · 02-11-2009, 04:05 PM

The Toyota hinges are 82-??, EBAY is loaded with repops as they were used on 4 Runners. They look pretty flimsy, but the hood doesn't seem to move around any more than it did with stock hinges. I believe that is because the stock hinges have more pivot points that therefore allow more slop.

smashingchuck · 02-15-2009, 02:44 PM

I'm running 5-1/4" back spacing all the way around with 8.5's in the front and 10's in the back.

jeromy1981 · 02-15-2009, 02:58 PM

Quote:

Originally Posted by smashingchuck

I'm running 5-1/4" back spacing all the way around with 8.5's in the front and 10's in the back.

so is that the offset??? im a newb with the wheel stuff
would these rims give me a good lip in Size: 22 x 9.5
Offset: 18
again all input is greatly appreciated

abadsvt · 02-16-2009, 01:33 AM

Quote:

Originally Posted by jeromy1981

so is that the offset??? im a newb with the wheel stuff
would these rims give me a good lip in Size: 22 x 9.5
Offset: 18
again all input is greatly appreciated

I have those wheels on my daily driver. They are pretty sweet especially for the price! Here is a pic of the wheels. There 22's and they look so little. Wish i went 24's. If i am not mistaken 18mm offset equals about 6" of backspacing. Don't quote me though.

josh

jeromy1981 · 02-16-2009, 07:58 AM

Quote:

Originally Posted by abadsvt

I have those wheels on my daily driver. They are pretty sweet especially for the price! Here is a pic of the wheels. There 22's and they look so little. Wish i went 24's. If i am not mistaken 18mm offset equals about 6" of backspacing. Don't quote me though.

josh

so would these rims fit right on my c10 bagged

babyblueoval · 02-16-2009, 09:01 AM

Quote:

Originally Posted by abadsvt

I have those wheels on my daily driver. They are pretty sweet especially for the price! Here is a pic of the wheels. There 22's and they look so little. Wish i went 24's. If i am not mistaken 18mm offset equals about 6" of backspacing. Don't quote me though.

josh

You just need the tires to be a little taller and the truck to be a few inches lower. Then they'll look right at home.

garagemonster · 02-21-2009, 05:39 PM

bad trucks

Riveted1 · 02-22-2009, 06:28 PM

What wheels are those Garagemonster? (Rear ones)

garagemonster · 02-23-2009, 03:44 AM

Quote:

Originally Posted by Riveted1

What wheels are those Garagemonster? (Rear ones)

the wheels are U2s 22"

75silverstep · 03-05-2009, 10:15 AM

Quote:

Originally Posted by garagemonster

bad trucks

Where u at in tulare those look like lennar homes by me .....nice truck.

garagemonster · 03-07-2009, 04:42 AM

Quote:

Originally Posted by 75silverstep

Where u at in tulare those look like lennar homes by me .....nice truck.

yeah its a lennar just east of monney and bardsly

oldnslow · 03-14-2009, 05:33 PM

Here's mine in primer, with borrowed 18 and 20" Torque Thrust II's I will put some pix up tomorrow with the truck layed out.

babyblueoval · 03-14-2009, 11:00 PM

Quote:

Originally Posted by oldnslow

here's mine in primer, with borrowed 18 and 20" torque thrust ii's i will put some pix up tomorrow with the truck layed out.

sweet!!!!

Strodder · 03-14-2009, 11:10 PM

Quote:

Originally Posted by oldnslow

Here's mine in primer, with borrowed 18 and 20" Torque Thrust II's I will put some pix up tomorrow with the truck layed out.

Nice Job. Real clean looking.

02-10-2009, 05:51 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: How about some pics of bagged C-10's Sweet! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-10-2009, 07:06 PM	#2
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: How about some pics of bagged C-10's Super cool __________________ Just not low enough... ----------------------------- Sinister Killer

02-10-2009, 07:18 PM	#3
Mike J vw guy & now c-10 guy Join Date: Sep 2008 Location: Louisville,KY Posts: 483	Re: How about some pics of bagged C-10's oldnslow, that thing is sick man! I like it. __________________ '68 long fleet Finally made some progress on the build!!! My Build Thread

02-10-2009, 07:43 PM	#4
lbrtzmr odes 72 Join Date: Feb 2007 Location: usa Posts: 66	Re: How about some pics of bagged C-10's mamalona 72 Attached Images __________________ odes 72

02-10-2009, 07:48 PM	#5
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: How about some pics of bagged C-10's WOW!!! Those wheels look GINORMOUS!! Thats a bad a$$ truck!! Last edited by crawdadfox; 02-10-2009 at 07:49 PM. Reason: tmb

04-06-2009, 01:28 AM	#6
Throwback Registered User Join Date: Jul 2008 Location: Watson LA Posts: 105	Re: How about some pics of bagged C-10's Here is my 84 C20 Crew Cab tuckin 22 KMC ss Black with Chrome lip in the front and 24inch KMC ss Black with chrome lip. The bed is in the works and once the truck is COMPLETELY finished, I will throw up a build thread on what I have done since I bought it. These pics are from Scrapin the Coast 08. Attached Images

02-11-2009, 09:30 AM	#8
p8ntballer1911 Bodydropped71 Join Date: Jun 2008 Location: Conroe Texas Posts: 264	Re: How about some pics of bagged C-10's What wheels are those? That truck is badass

02-11-2009, 10:30 AM	#9
oldnslow Old Guy Join Date: Jan 2009 Location: Minooka, Il Posts: 111	Re: How about some pics of bagged C-10's Thanks for the great responses! here's some info on the truck. It's a bagged 68 short/wide with a 12 bolt rear end, the axles machined and drilled to 5 X4.75" pattern and fitted with disc brakes, it is located by a triangulated 4 bar. The stock front cross member was raised 1", it uses stock upper and lower control arms with S10 drop spindles and a BRT rack and pinion. The frame has a "bridge" in the back, it is fully boxed and uses tubular center cross members and trans mount, the body mounts were lowered 1". The engine is a Gen 5 454 with Edelbrock intake and Holley carb, the trans is a 700R4. The body was stripped to bare metal, cab corners and 1 rocker were replaced, the original floor was modified with a big tunnel to accommodate the raised engine and trans and the 1" body drop, a flat firewall was also installed. The current project is the bed, we raised the front floor section 4" and notched the cross members for drive shaft clearance. the tubs are under construction. i will post more pictures when we have finished them. Here's a link to more pix:http://s598.photobucket.com/albums/t...view=slideshow Last edited by oldnslow; 02-11-2009 at 10:43 AM. Reason: Link was incorrect

02-11-2009, 11:10 AM	#10
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How about some pics of bagged C-10's Nice work oldnslow How did you make the S10 spindles work? What is your opinion of the Toy hinges? Sturdy enough? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

02-11-2009, 11:32 AM	#11
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: How about some pics of bagged C-10's What kind of toyota are they from? __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

02-11-2009, 04:05 PM	#12
oldnslow Old Guy Join Date: Jan 2009 Location: Minooka, Il Posts: 111	Re: How about some pics of bagged C-10's The Toyota hinges are 82-??, EBAY is loaded with repops as they were used on 4 Runners. They look pretty flimsy, but the hood doesn't seem to move around any more than it did with stock hinges. I believe that is because the stock hinges have more pivot points that therefore allow more slop.

02-15-2009, 02:44 PM	#13
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: How about some pics of bagged C-10's I'm running 5-1/4" back spacing all the way around with 8.5's in the front and 10's in the back. __________________ 78 Build Thread 4Runner Build

02-21-2009, 05:39 PM	#18
garagemonster Registered User Join Date: Feb 2009 Location: tulare ca Posts: 35	Re: How about some pics of bagged C-10's bad trucks Attached Images

02-22-2009, 06:28 PM	#19
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: How about some pics of bagged C-10's What wheels are those Garagemonster? (Rear ones) __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado Last edited by Riveted1; 02-22-2009 at 06:28 PM.

03-14-2009, 05:33 PM	#23
oldnslow Old Guy Join Date: Jan 2009 Location: Minooka, Il Posts: 111	Re: How about some pics of bagged C-10's Here's mine in primer, with borrowed 18 and 20" Torque Thrust II's I will put some pix up tomorrow with the truck layed out. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.