New member with a 1960 - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

markeb01 · 01-11-2017, 12:18 AM

The reflections from all that work is simply amazing! Nice job!!

The1960APE · 01-11-2017, 09:44 AM

Quote:

Originally Posted by markeb01

The reflections from all that work is simply amazing! Nice job!!

Thank you sir!

wolfsden · 01-26-2017, 10:24 PM

Quote:

Originally Posted by par4tom

You can get 10" wheels in the back depending upon the offset. Zero offset may create a rubbing on the fender wells and you may have to use a 1/2 inch spacer.

Also, watch over the top of the tires in the rear. There is an outer fender edge and bracing that could come into play depending upon the size wheel and tire and how low you set the truck.

I just went through this with 20 inche / 10" wide wheels, tried 285's, then 265's then 255 20's before I finally got them to fit. I think there is about 12.5" of room between the fender lip and the bed so tire width is not unlimited.

On the front, you shouldn't have a problem depending upon how low you choose to go. I used 2.5" drops in the front and then cranked the torsion bars up as the 8.5" 245's were rubbing the fender lips. I am rolling the lips up this week to get a little bit more clearance. BTW, mine only rubbed on the passenger side and on turns to the right while hitting a slight bump.

Great looking truck you got there...I like it a lot!!! Here are the 10 inch wheels in the rear...Foose Legends. My rear axel is on bags so I run it just a bit lower then this right now...no rubbing!

Your running 20X10 rims front and back with 255 tires and no rubbing just a bit on passenger front? What is the tire exact size?

gringoloco · 02-04-2017, 01:35 AM

Really digging it. What size are the rear tires?

The1960APE · 02-07-2017, 12:40 PM

Quote:

Originally Posted by gringoloco

Really digging it. What size are the rear tires?

The rears are 305/35/20 We have realized that I have plenty of room in the rear after the tubs and narrowing the rear end, the next set will more than likely be a 345 or a M/T tire a bit wider!

The1960APE · 02-07-2017, 12:43 PM

Its been a while since posting, we pulled off the Apache for a few weeks to work some bugs out of my 1965 Olds 442......come buy it please..LOL Its full steam ahead for the Ape now! IT has an appointment with Mr. Interior man mid March! HURRY HURRY

The1960APE · 02-10-2017, 03:24 PM

A little more progress and some goodies from the chrome shop.....

62stepside longbox · 02-10-2017, 04:12 PM

That chrome looks great! Roughly How much did it run you if you don't mind me asking?

**DPowers** · 02-10-2017, 11:25 PM

Chrome looks great.

graymage · 02-11-2017, 11:29 AM

looks real nice, I am getting lots of ideas for my 66

metalprelude · 02-11-2017, 09:25 PM

I'm finally getting started on my 61 Apache. Where did you get your booster and master cylinder setup?

The1960APE · 02-14-2017, 10:45 AM

Quote:

Originally Posted by 62stepside longbox

That chrome looks great! Roughly How much did it run you if you don't mind me asking?

it was 125.00-150.00 per piece, Thanks

The1960APE · 02-14-2017, 10:46 AM

Quote:

Originally Posted by metalprelude

I'm finally getting started on my 61 Apache. Where did you get your booster and master cylinder setup?

Pirate Jack on Ebay, they are local, I am running the bracket that CaptainFab here on the forum makes, it was an AWESOME fit!

The1960APE · 02-14-2017, 10:47 AM

Quote:

Originally Posted by graymage

looks real nice, I am getting lots of ideas for my 66

LOL hopefully not from our crazy shenanigans

......

The1960APE · 02-14-2017, 10:47 AM

Quote:

Originally Posted by DPowers

Chrome looks great.

Thanks Dr. Powers!

The1960APE · 02-17-2017, 10:13 AM

The engine is back in, AC vents finalized, double sound deadening finished, Pedals installed, column painted and installed... She should start moving along now!

graymage · 02-17-2017, 11:15 AM

I like all the shenanigans, my truck had a manual. is that auto brake pedal factory?

The1960APE · 02-17-2017, 11:29 AM

Quote:

Originally Posted by graymage

I like all the shenanigans, my truck had a manual. is that auto brake pedal factory?

We did use the factory arm, we bent it slotted it, welded a new pad on it to fit the new pedal cover, powder coated it and there you have it, once its hooked up it sits much closer to the floor like a modern truck!

graymage · 02-17-2017, 11:32 AM

perfect I like it

The1960APE · 02-17-2017, 11:54 AM

Quote:

Originally Posted by graymage

perfect I like it

Thank you sir, I am really excited to get it over to the upholstery shop.....It is turning out to be a very unique build, I don't know if I have seen anything quite like it. I think interior can really make or break a project.....We have a few tricks up our sleeve....Hopefully it turns out nice!

graymage · 02-17-2017, 02:21 PM

we will be watching and taking notes, stealing ideas, lol!!!

forestb · 02-17-2017, 04:20 PM

I think you need to change the name of this thread. I would no longer consider you a new member.

62stepside longbox · 02-17-2017, 10:35 PM

The1960APE · 02-20-2017, 11:17 AM

Old member with a 1961? LOL

62stepside longbox · 02-20-2017, 11:37 AM

Quote:

Originally Posted by the1960ape

old member with a 1961? Lol

😂😂

01-11-2017, 12:18 AM	#301
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: New member with a 1960 The reflections from all that work is simply amazing! Nice job!! __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

02-04-2017, 01:35 AM	#304
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: New member with a 1960 Really digging it. What size are the rear tires? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

02-07-2017, 12:43 PM	#306
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 Its been a while since posting, we pulled off the Apache for a few weeks to work some bugs out of my 1965 Olds 442......come buy it please..LOL Its full steam ahead for the Ape now! IT has an appointment with Mr. Interior man mid March! HURRY HURRY __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735

02-10-2017, 03:24 PM	#307
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 A little more progress and some goodies from the chrome shop..... __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735

02-10-2017, 04:12 PM	#308
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: New member with a 1960 That chrome looks great! Roughly How much did it run you if you don't mind me asking? __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

02-10-2017, 11:25 PM	#309
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,443	Re: New member with a 1960 Chrome looks great. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

02-11-2017, 11:29 AM	#310
graymage Registered User Join Date: Jan 2017 Location: hastings, ne Posts: 81	Re: New member with a 1960 looks real nice, I am getting lots of ideas for my 66

02-11-2017, 09:25 PM	#311
metalprelude Registered User Join Date: Jul 2016 Location: Birmingham, AL Posts: 29	Re: New member with a 1960 I'm finally getting started on my 61 Apache. Where did you get your booster and master cylinder setup?

02-17-2017, 10:13 AM	#316
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 The engine is back in, AC vents finalized, double sound deadening finished, Pedals installed, column painted and installed... She should start moving along now! __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735

02-17-2017, 11:15 AM	#317
graymage Registered User Join Date: Jan 2017 Location: hastings, ne Posts: 81	Re: New member with a 1960 I like all the shenanigans, my truck had a manual. is that auto brake pedal factory?

02-17-2017, 11:32 AM	#319
graymage Registered User Join Date: Jan 2017 Location: hastings, ne Posts: 81	Re: New member with a 1960 perfect I like it

02-17-2017, 02:21 PM	#321
graymage Registered User Join Date: Jan 2017 Location: hastings, ne Posts: 81	Re: New member with a 1960 we will be watching and taking notes, stealing ideas, lol!!!

02-17-2017, 04:20 PM	#322
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: New member with a 1960 I think you need to change the name of this thread. I would no longer consider you a new member.

02-17-2017, 10:35 PM	#323
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: New member with a 1960 __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

02-20-2017, 11:17 AM	#324
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 Old member with a 1961? LOL __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.