06-22-2024, 05:02 PM | #301 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 497
|
Re: 65Custom Build Thread
Well its welded in and has changed slightly from the first go round, I think it will look good once it is finished out and motor is in etc won't really notice it that much, but serves the purpose of getting the motor pushed back and fitting in better.
|
07-02-2024, 10:22 PM | #302 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 497
|
Re: 65Custom Build Thread
Piece of advice
What ever you do not ever add up all your invoices to see what your project has cost you. |
07-13-2024, 09:28 PM | #303 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 497
|
Re: 65Custom Build Thread
Getting a little hood repair the front inner structure was rusted but the exterior hardly showed any signs of rust. Cut down the steering column 3" to be able to fit the steering linkage for the rack. Mounted the rear sway bar. Filling all the little holes which showed up after the sand blasting.
|
07-13-2024, 09:30 PM | #304 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 497
|
Re: 65Custom Build Thread
mounted rear sway bar
|
07-20-2024, 04:21 PM | #305 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 497
|
Re: 65Custom Build Thread
The hood front inner support is repaired and installed back into place
Front sway bar is in place I like this Tailgate mod |
07-21-2024, 03:27 PM | #306 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 497
|
Re: 65Custom Build Thread
coolc10 is now making an air box to go with the center ac vent he sells,
I purchased one and I am really happy with how it seals to the front ac vent cover this will really make a difference in how well this vent works. |
07-22-2024, 02:13 AM | #307 |
Registered User
Join Date: Aug 2020
Location: Braunschweig, Lower Saxony, Germany
Posts: 774
|
Re: 65Custom Build Thread
Nice Part, looks good
__________________
------------------------------------------- Greetings Harald My 62 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=829782 |
08-05-2024, 08:49 PM | #308 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 497
|
Re: 65Custom Build Thread
Update, temp wheels on ready to be put back on the ground soon 15 years since it has had wheels on it. inner fenders needed to be modified to fit over the new coil-overs and also need cover the old steering column hole in the inner fender. Front wheels are more centered in the wheel well now, that turned out well, once the bed is back on we will get a look at how the rear wheels align in the opening, since the front worked out so well the rear should look just as good.
|
08-05-2024, 08:53 PM | #309 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 497
|
Re: 65Custom Build Thread
The tailgate is now finished
|
Bookmarks |
|
|