For sale: Hand-Made Custom LED Brake lights.

[bigsnookmaster]

Hi Justin, I'd be interested in the third brake/cargo light combo, and also, do you make them for the stepside taillights. Please let me know. Thanks, Greg

[dukkie]

OK Justin I Have your bread and butter, 72 tail light (blue Dot) and reverse lights, but, i think im seriously complicating it. I assume if Even a single LED is flashable than any number of any pattern (IE.. if i wanted that < arrow > or a Star or the bowtie or the Middle Finger what have you~ anything you can draw out on a brightlight~) should be basically just the same.
I have read (skimmed over) all 13 pages of this thread and heres what i would like to have done if you have figured out the details to flash. Below listed are 4 photoshopped images options: All, Alt, Top only, and Bottom only flashers.

All Flash:


Alternate Flash:


Bottom Flash:


Top Flash:



1. What would be total price for the truck exterior front, rear, side? or would side be overkill?
2. If possible the total flasher price blue dot, and reverse?
3. If not than the total price for blue dot, reverse, front turn?

[724x4a/cchevy]

Originally Posted by dukkie

OK Justin I Have your bread and butter, 72 tail light (blue Dot) and reverse lights, but, i think im seriously complicating it. I assume if Even a single LED is flashable than any number of any pattern (IE.. if i wanted that < arrow > or a Star or the bowtie or the Middle Finger what have you~ anything you can draw out on a brightlight~) should be basically just the same.
I have read (skimmed over) all 13 pages of this thread and heres what i would like to have done if you have figured out the details to flash. Below listed are 4 photoshopped images options: All, Alt, Top only, and Bottom only flashers.

1. What would be total price for the truck exterior front, rear, side? or would side be overkill?
2. If possible the total flasher price blue dot, and reverse?
3. If not than the total price for blue dot, reverse, front turn?

It's true, anything is possible, but it gets pretty complicated from a soldering/wiring standpoint. The backside can get pretty crazy depending on what design you want. I have done bowtie front turn signals for a 67-68 before.

The price on specialty lights like that would be different from the base prices since it's so customized. Also, the animations you made only light every other row up. there are actually 120 LEDs per side and you only have about half of them lit up. Also, I am having a hard time dimming my leds. That's why i always do either on or off, it also makes for a better contrast and is much more noticable to other drivers. Regular blue dots are $110, reverse are $50, and 72 front turns are $80 and $8 shipping. Let me know what i can do for you. I would just rather not "dim" them for safety's sake. I know big mfg's can do it, but I don't have an electrical engineering degree.

[dukkie]

Ok, then how long do i have to wait till you get a degree, i mean Electrical Engineering and Manipulation of Light Emitting Diodes speializing in SEMA and Automotive Customization that is what your major correct?
Anyway.... sign me up for regular blue dots and reverse
Am i correct 110 + 50 + 8 = 168 shipped?

[724x4a/cchevy]

Originally Posted by dukkie

Ok, then how long do i have to wait till you get a degree, i mean Electrical Engineering and Manipulation of Light Emitting Diodes speializing in SEMA and Automotive Customization that is what your major correct?
Anyway.... sign me up for regular blue dots and reverse
Am i correct 110 + 50 + 8 = 168 shipped?

Wait wha???
Yes that is correct. I PM'ed you.
Justin

[dukkie]

Payment sent...
No rush job for me, im in no hurry, as taillights are the last thing i should be considering these were just too cool to skip for now. But i am curious whats turnaround time usually. Oh and i may be wanting a set for a 78 bronco in the future i know you need the lenses to pattern it out please include that address when you ship mine thanks

[chevyguy_72]

What about entire rows in sequence? from the inside to the outside? That would work for both flashers and brakes

[wwotr]

PM Sent

[454_72_4X4]

Originally Posted by chevyguy_72

What about entire rows in sequence? from the inside to the outside? That would work for both flashers and brakes

The problem I see with the sequential flashing idea is the width of the taillight itself. It's just not wide enough to make the sequential effect show up very good.
If it could be done it would be cool though.

[dukkie]

sequential in rows going vertical?

[chevyguy_72]

Originally Posted by dukkie

sequential in rows going vertical?

yes vertically... That would be pretty cool as long as its not too fast

[724x4a/cchevy]

I don't know about that. You guys are talking about some fairly complicated electronics. This ain't your average two element 1157 setup. The issue I have with it, is how would you be able to tell the difference between hitting the brakes and the turn signal? Seems like the cool flash should be for turn signals only, and everything bright for brake lights. The factory wiring sends the same signal for brakes and turn signal in these trucks. The kits you see on ebay for the mustangs work great for them because they have a definite brake light and definite turn signal. the two are separated. It just won't work with the factory wiring.
Justin

[chevyguy_72]

Ok was thinking from side to side...

[Jeffs70]

Originally Posted by dukkie

sequential in rows going vertical?

wow those would be awesome to have, when in blinker mode they flash like that and in brake mode they dont flash.

[wwotr]

Originally Posted by wwotr

PM Sent

724x4a/cchevy another PM sent.
Never got an answer to my 1st one.

[wwotr]

Originally Posted by wwotr

724x4a/cchevy another PM sent.
Never got an answer to my 1st one.

Anyone else having problems getting hold of "724x4a/cchevy"?

I've sent him 2 PM's in 4 weeks and also posted here,
with NO LUCK and NO REPLIES.

[67cheby]

I would like to buy a set of brake lights for my 67 chevy swb, the ones in the above pic dont look like they have as many Leds in them as the ones from the first pics, is this correct or am i just not looking at them right ?

[wwotr]

Originally Posted by wwotr

Anyone else having problems getting hold of "724x4a/cchevy"?

I've sent him 2 PM's in 4 weeks and also posted here,
with NO LUCK and NO REPLIES.

Well unfortunatley I'm ready to buy and if I don't get an answer in the next couple of days, I'm going to have to go to a Different Vendor.

[dukkie]

i ordered a pair 3-22-10, havent heard from him since a pm 4-5-10... i dunno

...if i recall correctly, somewhere back in the 13 pages of this thread he got backed up once before, school and what not, be patient a min and all will return as should be

[wwotr]

Originally Posted by dukkie

i orderd a pair 3-22-10, havent heard from him since a pm 4-5-10... i dunno

I couldnt wait any longer for him, so I went with "Rodworx" and talked with Kevin.
He answered all my questions and suggested what type of Flashes to use, and was very helpful.
I ordered them yesterday.
Their shop is in Florida and I live in California.
I ordered yesterday and I got an e-mail saying "for the sake of time",
they were shipping the order from their Californai Warehouse and it should be to me by Tuesday the 20th!
No dispespect to the maker of the LED's in THIS Thread, and I'm not trying to "Hijack the Thread.
The bottom line was that I wanted the LED's described here, but after 3 unanswered PM's, an E-Mail and posting here, I had to search out other Venues.

[dukkie]

ya true, but i already paid so i continue to wait

[724x4a/cchevy]

Dukkie, yours are next. I'm nearly finished with EXD56's lights. I will be able to start them this week.
Justin

[wwotr]

Originally Posted by 724x4a/cchevy

Dukkie, yours are next. I'm nearly finished with EXD56's lights. I will be able to start them this week.
Justin

Damn Justin.....Where ya been?
I had an order waiting, but after not hearing from you (after multiple attempts), I put in an order on Thursday.
I'm sorry man, but I tried to go through you 1st.

[ShredSled]

Originally Posted by bigsnookmaster

...and also, do you make them for the stepside taillights. Please let me know. Thanks, Greg

this X2.

I'm wondering if you have made, or can make some for the round taillights on a step-side?

Maybe if you could make it with an outer-ring or "halo" lit up around the perimeter for taillights, then light up the center for brake or turn signal?

Please let me know, I'd be highly interested, as I'm sure other stepper owners here would be too!


...I'm a bit skeptical with the lack of communication being exhibited here in this thread... is it time for your college finals or something?

[dukkie]

well thanks for the update Justin. i ordered mine way before i was ready to be thinking about taillights so the wait is not a problem for me. im about to catch up on the build probably perfect timing for Justin to have them ready when i get to that point. Like i said i read all 13 pages of thread before and buyers seem happy occasionally Justin becomes busy with life and not LED's so ill continue to wait, if there comes a time where i have nothing left but Justin's tail lights than apparently i missed something. yea theyre cool and whatever but a set of handmade bulbs behind some lenses isnt gonna make my build incomplete. way too many important things to touch on than bulbs at this point