No Limit's "K-10" - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nsanehotrodz · 02-06-2012, 10:17 PM

Quote:

Originally Posted by frenchblue72

those are tits..

^x2!

Mechanic77 · 02-07-2012, 12:04 AM

Those wheels are just awesome

**oldman3** · 02-07-2012, 12:19 AM

WOW, those look great.....Jim

aggie91 · 02-07-2012, 11:59 AM

Those wheel are the bomb. Is the center coated gray? Can't wait for more updates and to see this one complete in person.

**robnolimit** · 02-07-2012, 12:37 PM

Thanks for all the positive feedback. This is my first ever attemp at making wheels. There is a lot to learn, but it was kinda fun. when the centers were finished (machined), we took then to a blaster and had then go hot & heavy on them to soften the edges, then they were powder coated grey with a semi-flat clear. I wanted brushed hops, but was over ruled. I like 'em. "Loco-Motive"'s.

Bustedup · 02-07-2012, 10:12 PM

Rob, how wide are you running in the front?

**robnolimit** · 02-08-2012, 12:46 PM

Definately 18x12 with a 335 out back. Trying for that up front too, or 18x11, with a 315. Fender clearance is an issue.

**robnolimit** · 02-08-2012, 04:17 PM

OK, so this is how we fixed the wheel/tire clearance issues. The new openings are 2 1/2" higher and appx 1 1/2" wider. We tried to make 'em look stock-ish, and blend them into the stock body lines. If there were Can-Am trucks in 1972, this is what they would have looked like.

BENC-10 · 02-08-2012, 04:38 PM

Quote:

Originally Posted by robnolimit

Updates

First Ever WideBodied C10??

**67cheby** · 02-08-2012, 04:41 PM

well now that 18x11 should fit !!

68 TT · 02-08-2012, 05:16 PM

Very nice. The flare blends well into the stock body lines.

Are you going to do something similar out back so it matches?

(joey) · 02-08-2012, 07:38 PM

the flare looks clean.did you use the stock openings and added a strip?

**robnolimit** · 02-08-2012, 08:42 PM

Grill

**robnolimit** · 02-08-2012, 08:44 PM

Update

**robnolimit** · 02-08-2012, 09:22 PM

Quote:

Originally Posted by (joey)

the flare looks clean.did you use the stock openings and added a strip?

I wish, we built them from scratch, it took about 6 hrs each. And yes, I will have to do the back to match.

**Dieselwrencher** · 02-08-2012, 09:33 PM

Rob, that looks great! Those wheels are killer! I'm assuming you're going to be cutting holes in the grill fillers you installed?

mooseknuckles · 02-08-2012, 09:59 PM

......baddest k10 ever!

jbclassix · 02-08-2012, 10:42 PM

there is that piece on the roof again! Ever gonna clue us into what it's for? can you explain the grille a little bit also?

**72 tigger** · 02-08-2012, 10:44 PM

Excellent craftsmanship! Looking forward to following this

hgs_notes · 02-08-2012, 10:48 PM

That grill looks heavy. Those little holes behind the headlights won't lighten that front end much. I'd use it to make a mold to form one of carbon fiber. I'm only half joking. I've been reading up and watching videos on carbon fiber parts forming. It's not that hard once you have collected the proper materials. That methad could be used to form the fender flares also, or whole fenders, whatever. Light weight and easy to repair.

luifer76 · 02-08-2012, 10:51 PM

WOW JUST WOW!! how in hell have i been missing this build i need to start hanging out here on the 67-72 area i went through the whole build bro and i got to tell you. you got some mad skills there i dig all the work you done to this k10 great job so far and keep the updates coming im staying tuned for this one......

jasonhall · 02-08-2012, 11:54 PM

Bad a$$!!!

tasian · 02-09-2012, 12:22 AM

Quote:

Originally Posted by robnolimit

I wish, we built them from scratch, it took about 6 hrs each. And yes, I will have to do the back to match.

that makes me think of something how many man hours do you think you already have into Da'Killa?

i think that's gonna look sweeeet with those rim's and the flare's they just seem to suit each other for some reason

wild4wheels · 02-09-2012, 09:45 AM

Ya know, with as many holes that your drilling in that thing, maybe paint it yellow or yellow-orange and call it Swiss Cheese!

Remember the Cheese Whiz '55 back in the 80's?

Truck is looking awesome! - Can't wait to see it runnin!

**robnolimit** · 02-09-2012, 05:29 PM

lets see, no more holes in the grill. Two for brake ducts and one for air cleaner inlet. We are well over the 250 hr mark, and closing in on the 500. I'd like carbon fiber, but know nothing about it. It would be cool to have it all steel, but I know it's heavier. The mistery panl is still in play, You'll see it installed soon.

02-07-2012, 12:04 AM	#302
Mechanic77 Registered User Join Date: Nov 2010 Location: Burrton, KS Posts: 215	Re: No Limit's "K-10" Those wheels are just awesome __________________ Pro Touring 1964 C10-Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=441627 Project '65 Short Step Daily Driver http://67-72chevytrucks.com/vboard/s...d.php?t=661948

02-07-2012, 12:19 AM	#303
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: No Limit's "K-10" WOW, those look great.....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-07-2012, 11:59 AM	#304
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: No Limit's "K-10" Those wheel are the bomb. Is the center coated gray? Can't wait for more updates and to see this one complete in person. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-07-2012, 12:37 PM	#305
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" Thanks for all the positive feedback. This is my first ever attemp at making wheels. There is a lot to learn, but it was kinda fun. when the centers were finished (machined), we took then to a blaster and had then go hot & heavy on them to soften the edges, then they were powder coated grey with a semi-flat clear. I wanted brushed hops, but was over ruled. I like 'em. "Loco-Motive"'s. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

02-07-2012, 10:12 PM	#306
Bustedup Registered User Join Date: Aug 2002 Location: Kent, Wash Posts: 53	Re: No Limit's "K-10" Rob, how wide are you running in the front?

02-08-2012, 12:46 PM	#307
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" Definately 18x12 with a 335 out back. Trying for that up front too, or 18x11, with a 315. Fender clearance is an issue. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

02-08-2012, 04:17 PM	#308
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" OK, so this is how we fixed the wheel/tire clearance issues. The new openings are 2 1/2" higher and appx 1 1/2" wider. We tried to make 'em look stock-ish, and blend them into the stock body lines. If there were Can-Am trucks in 1972, this is what they would have looked like. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 02-08-2012 at 04:42 PM.

02-08-2012, 04:41 PM	#310
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: No Limit's "K-10" well now that 18x11 should fit !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-08-2012, 05:16 PM	#311
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: No Limit's "K-10" Very nice. The flare blends well into the stock body lines. Are you going to do something similar out back so it matches? __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

02-08-2012, 07:38 PM	#312
(joey) Registered User Join Date: Aug 2008 Location: halifax nova scotia Posts: 375	Re: No Limit's "K-10" the flare looks clean.did you use the stock openings and added a strip? __________________ check out my build (the start of a shaved,channeled,bagged 67 gmc with a 01 gmc frame and drivetrain) http://67-72chevytrucks.com/vboard/s...d.php?t=434253

02-08-2012, 08:42 PM	#313
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" Grill Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

02-08-2012, 08:44 PM	#314
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" Update Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

02-08-2012, 09:33 PM	#316
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: No Limit's "K-10" Rob, that looks great! Those wheels are killer! I'm assuming you're going to be cutting holes in the grill fillers you installed? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-08-2012, 09:59 PM	#317
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: No Limit's "K-10" ......baddest k10 ever! __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

02-08-2012, 10:42 PM	#318
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: No Limit's "K-10" there is that piece on the roof again! Ever gonna clue us into what it's for? can you explain the grille a little bit also? __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205



Register or Log In To remove these advertisements.

02-08-2012, 10:44 PM	#319
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,222	Re: No Limit's "K-10" Excellent craftsmanship! Looking forward to following this

02-08-2012, 10:48 PM	#320
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,121	Re: No Limit's "K-10" That grill looks heavy. Those little holes behind the headlights won't lighten that front end much. I'd use it to make a mold to form one of carbon fiber. I'm only half joking. I've been reading up and watching videos on carbon fiber parts forming. It's not that hard once you have collected the proper materials. That methad could be used to form the fender flares also, or whole fenders, whatever. Light weight and easy to repair. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

02-08-2012, 10:51 PM	#321
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: No Limit's "K-10" WOW JUST WOW!! how in hell have i been missing this build i need to start hanging out here on the 67-72 area i went through the whole build bro and i got to tell you. you got some mad skills there i dig all the work you done to this k10 great job so far and keep the updates coming im staying tuned for this one...... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

02-08-2012, 11:54 PM	#322
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: No Limit's "K-10" Bad a$$!!!

02-09-2012, 09:45 AM	#324
wild4wheels Registered User Join Date: Jan 2001 Location: Queen Creek, Arizona Posts: 1,626	Re: No Limit's "K-10" Ya know, with as many holes that your drilling in that thing, maybe paint it yellow or yellow-orange and call it Swiss Cheese! Remember the Cheese Whiz '55 back in the 80's? Truck is looking awesome! - Can't wait to see it runnin! __________________ Dave aka "Wild" Current truck "Ida Mae" 71 K5 Blazer Former Trucks "Loretta" 71 Longbed (AZ) "Tanya" 69 Stepside (AZ) "Ferdinand" 71 Longhorn (SD) "Patches" 67 Panel (IA/ KY) "Rosita" 68 C30 (KY) Instagram @Wildforwheels @k5_klub @c10university Profile pic provided by Jeff Sundance

02-09-2012, 05:29 PM	#325
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" lets see, no more holes in the grill. Two for brake ducts and one for air cleaner inlet. We are well over the 250 hr mark, and closing in on the 500. I'd like carbon fiber, but know nothing about it. It would be cool to have it all steel, but I know it's heavier. The mistery panl is still in play, You'll see it installed soon. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

Register or Log In To remove these advertisements.