finally come - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pimpston65** · 09-08-2017, 12:57 PM

might be a bit a overkill, but i had the lift jig remade in steel. i also made it a tandem. now i use 2 hoists instead of one.

**pimpston65** · 09-08-2017, 12:59 PM

Quote:

Originally Posted by pimpston65

might be a bit a overkill, but i had the lift jig remade in steel. i also made it a tandem. now i use 2 hoists instead of one.

i had the center one added also with the idea of being able to flip it and use it to lift from the back pointing in, but i may cut those brackets off.

**pimpston65** · 09-15-2017, 01:05 AM

i must be lucky. found the rear cab support from desert valley auto parts. they cut it out,boxed and shipped for $250 btw the rear cab support is different then the pickups, so thats why i say i was lucky to find one not rusted away!!!

lower50's · 09-15-2017, 02:54 PM

Score!!!

Bomp · 09-16-2017, 12:29 PM

Can't turn back now. Instead of pimpstone65 we'll have to call you pimpdoc

**pimpston65** · 09-16-2017, 10:50 PM

Quote:

Originally Posted by Bomp

Can't turn back now. Instead of pimpstone65 we'll have to call you pimpdoc

shut ur face, i like it!!!

**pimpston65** · 01-08-2018, 09:02 PM

got a new hoist to left the front end in order to suspend the floor for removal. the back end is already blocked up high enough the pull the rear receiver.

**pimpston65** · 01-10-2018, 01:09 PM

the biggest box i got thus far, guess a full floor pan will do that!!! pics to come unboxed

Bomp · 01-10-2018, 03:49 PM

Whoa, that's a big box. Glad to see its from LMC. Heard if there's any problems they'll stand behind their word and make things right.
Can't wait for the pics.

**pimpston65** · 01-10-2018, 09:33 PM

Quote:

Originally Posted by Bomp

Whoa, that's a big box. Glad to see its from LMC. Heard if there's any problems they'll stand behind their word and make things right.
Can't wait for the pics.

thats what i thought as well.

**60-66** · 01-10-2018, 09:08 PM

They make Suburban floors now ?

**pimpston65** · 01-10-2018, 09:37 PM

Quote:

Originally Posted by 60-66

They make Suburban floors now ?

i wish, its a pickup floor. i have the rear support for a burb from Az. from rocker to rocker with enough to graft to the rear floor pass'd the support and enough to graft to the new pan. i will need to cut the pickup rear cab support out and use the burb support. i will put a few pics to show my crazy plan...

**pimpston65** · 01-10-2018, 09:42 PM

should be enough to graft from both sides this is the burb it came from, saw it in person during thanksgiving!!!

lower50's · 01-11-2018, 09:23 AM

Cool!!! I have bought stuff from LMC. I liked it all.

**sirJim** · 01-11-2018, 10:03 AM

Looks good just dont let it get away from you. Hope you are bracing it so you keep the measurement right.

Bomp · 01-11-2018, 12:30 PM

Looks like you are ready for "this weekends project".

**pimpston65** · 01-19-2018, 09:02 PM

its the weekend!!! so here's todays value added task. i got tube 7' of 2.5x2.5 with 3/8 wall thnkness ima slot it in 2 spots so a link can slip in and cross pin it with a bolt say half down. the tube will lift from under the cross bars i have bolted to the a and b pilar.

**pimpston65** · 01-29-2018, 02:44 PM

one 1/2" drill bit and a cutoff wheel later, it works. now i can lift the front off frame. i will come up with a second way to hold it in the air for safety!!!

Bomp · 01-29-2018, 09:10 PM

Always good when it works. That right there is a WIN

**pimpston65** · 01-29-2018, 09:57 PM

Quote:

Originally Posted by Bomp

Always good when it works. That right there is a WIN

sure is a Win. hope to start peeling back the layers soon...

lower50's · 01-30-2018, 08:10 AM

Great idea

awbrown · 02-07-2018, 08:21 AM

Looks like I need to visit and see what you have going on !!!

**pimpston65** · 02-07-2018, 12:13 PM

Quote:

Originally Posted by awbrown

Looks like I need to visit and see what you have going on !!!

Heck yeah you do...

**aerotruk63** · 04-18-2018, 06:51 AM

bummer

**pimpston65** · 04-18-2018, 10:56 AM

Quote:

Originally Posted by aerotruk63

bummer

forget the glass im soo glad your new white truck has happened!!! like a new beginning.

09-08-2017, 12:57 PM	#1
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: finally come might be a bit a overkill, but i had the lift jig remade in steel. i also made it a tandem. now i use 2 hoists instead of one. Attached Images

09-15-2017, 01:05 AM	#3
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: finally come i must be lucky. found the rear cab support from desert valley auto parts. they cut it out,boxed and shipped for $250 btw the rear cab support is different then the pickups, so thats why i say i was lucky to find one not rusted away!!! Attached Images Last edited by pimpston65; 09-15-2017 at 04:53 PM.

09-15-2017, 02:54 PM	#4
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: finally come Score!!! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

09-16-2017, 12:29 PM	#5
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: finally come Can't turn back now. Instead of pimpstone65 we'll have to call you pimpdoc

01-08-2018, 09:02 PM	#7
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: finally come got a new hoist to left the front end in order to suspend the floor for removal. the back end is already blocked up high enough the pull the rear receiver. Attached Images

01-10-2018, 01:09 PM	#8
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: finally come the biggest box i got thus far, guess a full floor pan will do that!!! pics to come unboxed Attached Images

01-10-2018, 03:49 PM	#9
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: finally come Whoa, that's a big box. Glad to see its from LMC. Heard if there's any problems they'll stand behind their word and make things right. Can't wait for the pics.

01-10-2018, 09:08 PM	#11
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: finally come They make Suburban floors now ? __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

01-10-2018, 09:42 PM	#13
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: finally come should be enough to graft from both sides this is the burb it came from, saw it in person during thanksgiving!!! Attached Images Last edited by pimpston65; 01-10-2018 at 10:28 PM.

01-11-2018, 09:23 AM	#14
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: finally come Cool!!! I have bought stuff from LMC. I liked it all. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

01-11-2018, 10:03 AM	#15
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 306	Re: finally come Looks good just dont let it get away from you. Hope you are bracing it so you keep the measurement right. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

01-11-2018, 12:30 PM	#16
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: finally come Looks like you are ready for "this weekends project".

01-19-2018, 09:02 PM	#17
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: finally come its the weekend!!! so here's todays value added task. i got tube 7' of 2.5x2.5 with 3/8 wall thnkness ima slot it in 2 spots so a link can slip in and cross pin it with a bolt say half down. the tube will lift from under the cross bars i have bolted to the a and b pilar. Attached Images

01-29-2018, 02:44 PM	#18
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: finally come one 1/2" drill bit and a cutoff wheel later, it works. now i can lift the front off frame. i will come up with a second way to hold it in the air for safety!!! Attached Images

01-29-2018, 09:10 PM	#19
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: finally come Always good when it works. That right there is a *WIN*



Register or Log In To remove these advertisements.

01-30-2018, 08:10 AM	#21
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: finally come Great idea __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

02-07-2018, 08:21 AM	#22
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: finally come Looks like I need to visit and see what you have going on !!!

04-18-2018, 06:51 AM	#24
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: finally come bummer __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

Register or Log In To remove these advertisements.