1959 Fleetside REBORN - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OrrieG · 10-16-2012, 11:41 PM

Quote:

Originally Posted by shadow1967

The good, well sort of.... Found a wrench!

That flap is designed to be unscrewed so you can clean the leaves and junk out of the fresh air passage, but no one ever does or it got covered in undercoating so they could not see the screw. You are lucky, all I found were dead things.

_Ogre · 10-17-2012, 01:11 AM

Quote:

Originally Posted by shadow1967

Well here are the bad parts.....

that's not even close to bad. actually looks very good.
i had to replace the bottom 12'' of my cab, floors and doors
every picture you posted, the damage was caused by wet leaves and junk down the cowl vent.
that's why i recommend shaving the cowl vent in every tf build.

Kim57 · 10-17-2012, 09:20 AM

At least you got a wrench for your trouble.
I've seen a lot worse but was real lucky with mine as the floor had the most damage.
Kim

**buggy5872** · 10-17-2012, 11:07 AM

Quote:

Originally Posted by OrrieG

That flap is designed to be unscrewed so you can clean the leaves and junk out of the fresh air passage, but no one ever does or it got covered in undercoating so they could not see the screw. You are lucky, all I found were dead things.

First thing I do to every task force truck I get is rip those flaps off.

hotrod1 · 10-17-2012, 11:31 AM

Quote:

Originally Posted by _Ogre

that's not even close to bad. actually looks very good.
i had to replace the bottom 12'' of my cab, floors and doors
every picture you posted, the damage was caused by wet leaves and junk down the cowl vent.
that's why i recommend shaving the cowl vent in every tf build.

Has anyone seen the side cowls shaved?

**shadow1967** · 10-17-2012, 09:01 PM

Quote:

Originally Posted by hotrod1

Has anyone seen the side cowls shaved?

Side cowls Make for a good speaker pocket, won't need the vent. And most of it is unseen anyway, right. It's behind the inner fender panel.

**buggy5872** · 10-18-2012, 06:52 AM

They make for a decent sound box once you close off the cowl vent and the holes at the bottom. Big Bertha is all sealed up and thats what I used them for.

_Ogre · 10-18-2012, 02:01 PM

i cut mine out and made kick panel speakers in place of them

sorry for the thread hijack shadow

**shadow1967** · 10-21-2012, 02:20 PM

Quote:

Originally Posted by _Ogre

i cut mine out and made kick panel speakers in place of them

sorry for the thread hijack shadow

No Problems, _Ogre. You are full of useful information, since yours is done.

**shadow1967** · 10-21-2012, 02:24 PM

Well we started the body work, but I'm working 7 days aweek for awhile we got behind at work do to part shortages. So I will be thanking DAD big time.

_Ogre · 10-21-2012, 06:55 PM

holey smoly shadow

Chevette · 12-06-2012, 10:51 PM

Are you getting any time to work on the hot rod or still putting in the big hours at work?

**shadow1967** · 12-07-2012, 08:40 PM

Sorry guys,
Had some drama. We have done some work but not much. Anyone thinking of sandblasting their car or truck I recommend picklex20. Its been 6 weeks since blasting and no rust, no paint or primer.

**shadow1967** · 12-07-2012, 08:44 PM

pics...Been working crazy hours, corporate greed want to get alittle extra out for more year end profit. But I'm just glad to be working.

Chevette · 12-07-2012, 08:50 PM

Lookin' good, Shadow. Thanks for the tip on the picklex20.

Green 1959 · 12-07-2012, 09:09 PM

Nice work!! Remember to check your messages

**shadow1967** · 12-07-2012, 09:26 PM

Sorry GREEN. Will send.

Kim57 · 12-08-2012, 01:04 AM

Looking good.
Kim

_Ogre · 12-08-2012, 02:07 PM

progress is progress. the overtime will buy more truck parts

i used pickleX20 on the bed of my truck after sandblasting it
i did all the fab work to add the trunk and left it in the corner of my barn for 6 years
the bed was rust free for 4 years, the last couple of years it got some surface rust
it also works quite well on bare metal that your storing in the shop

Green 1959 · 12-22-2012, 12:02 PM

Quote:

Originally Posted by shadow1967

The good, well sort of.... Found a wrench!

Hahahahaahaa. That wrench makes it all worth while!

Making great progress, hoping to see it on the road soon.

**Dan in Pasadena** · 12-22-2012, 11:12 PM

Hey Shadow,
Since you're relatively local to me, who did your blasting? Would you recommend them? Seems like they were careful not to warp anything, is that accurate?

**shadow1967** · 12-23-2012, 02:39 PM

Dan in Pasadena, I will have to look for it. but it was orange county, Pickup and delivery was 75 dollars not bad.

**shadow1967** · 12-23-2012, 02:52 PM

http://primo-powder.clickforward.com...ating+services

Here is a link to there website. Hope thats OK admin, if not delete.
Brian was the guy I talked to. Price was 1100. They use aluminum ozide for media. They do not remove bondo unless you tell them to, it takes time to remove if applied correctly.

*R.A.D* · 01-07-2013, 08:37 AM

great build. looking forward to more efforts

*R.A.D* · 01-07-2013, 04:47 PM

double post

10-17-2012, 09:20 AM	#303
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: 1959 Fleetside REBORN At least you got a wrench for your trouble. I've seen a lot worse but was real lucky with mine as the floor had the most damage. Kim __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

10-18-2012, 06:52 AM	#307
buggy5872 Senior Member Join Date: Jun 2011 Location: North Beaver TWP PA Posts: 833	Re: 1959 Fleetside REBORN They make for a decent sound box once you close off the cowl vent and the holes at the bottom. Big Bertha is all sealed up and thats what I used them for. __________________ ___________________________ 1959 Apache Short Fleetside, 1959 Apache NAPCO Long Stepside, 1957 3100 with 59 fleetside bed 1957 5700 LCF Crew Cab "Big Bertha",1959 GMC F370 1958 GMC 600, 1946 Chevy, 1959 Viking 60 LCF 1974 Elcamino SS, 1979 6500 GMC Tilt Bed Wrecker Big Bertha Build

10-18-2012, 02:01 PM	#308
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: 1959 Fleetside REBORN i cut mine out and made kick panel speakers in place of them sorry for the thread hijack shadow __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

10-21-2012, 02:24 PM	#310
shadow1967 Senior Member Join Date: Jul 2011 Location: Hawthorne, CA Posts: 458	Re: 1959 Fleetside REBORN Well we started the body work, but I'm working 7 days aweek for awhile we got behind at work do to part shortages. So I will be thanking DAD big time. Attached Images __________________ Build for my 1959 Fleetside... http://67-72chevytrucks.com/vboard/s...d.php?t=518308

10-21-2012, 06:55 PM	#311
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: 1959 Fleetside REBORN holey smoly shadow __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

12-06-2012, 10:51 PM	#312
Chevette Registered User Join Date: Nov 2011 Location: Langley, BC Posts: 702	Re: 1959 Fleetside REBORN Are you getting any time to work on the hot rod or still putting in the big hours at work? __________________ 56 Chevy PU http://67-72chevytrucks.com/vboard/s...d.php?t=531955 Question: Know how to sell your truck for $50,000? Answer: Spend $100,000 building it.

12-07-2012, 08:40 PM	#313
shadow1967 Senior Member Join Date: Jul 2011 Location: Hawthorne, CA Posts: 458	Re: 1959 Fleetside REBORN Sorry guys, Had some drama. We have done some work but not much. Anyone thinking of sandblasting their car or truck I recommend picklex20. Its been 6 weeks since blasting and no rust, no paint or primer. Attached Images __________________ Build for my 1959 Fleetside... http://67-72chevytrucks.com/vboard/s...d.php?t=518308

12-07-2012, 08:44 PM	#314
shadow1967 Senior Member Join Date: Jul 2011 Location: Hawthorne, CA Posts: 458	Re: 1959 Fleetside REBORN pics...Been working crazy hours, corporate greed want to get alittle extra out for more year end profit. But I'm just glad to be working. Attached Images __________________ Build for my 1959 Fleetside... http://67-72chevytrucks.com/vboard/s...d.php?t=518308

12-07-2012, 08:50 PM	#315
Chevette Registered User Join Date: Nov 2011 Location: Langley, BC Posts: 702	Re: 1959 Fleetside REBORN Lookin' good, Shadow. Thanks for the tip on the picklex20. __________________ 56 Chevy PU http://67-72chevytrucks.com/vboard/s...d.php?t=531955 Question: Know how to sell your truck for $50,000? Answer: Spend $100,000 building it.

12-07-2012, 09:09 PM	#316
Green 1959 Registered User Join Date: Mar 2011 Location: Arizona City Posts: 353	Re: 1959 Fleetside REBORN Nice work!! Remember to check your messages __________________ I pity the fool with only 2 headlights!

12-07-2012, 09:26 PM	#317
shadow1967 Senior Member Join Date: Jul 2011 Location: Hawthorne, CA Posts: 458	Re: 1959 Fleetside REBORN Sorry GREEN. Will send. __________________ Build for my 1959 Fleetside... http://67-72chevytrucks.com/vboard/s...d.php?t=518308

12-08-2012, 01:04 AM	#318
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: 1959 Fleetside REBORN Looking good. Kim __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

12-08-2012, 02:07 PM	#319
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: 1959 Fleetside REBORN progress is progress. the overtime will buy more truck parts i used pickleX20 on the bed of my truck after sandblasting it i did all the fab work to add the trunk and left it in the corner of my barn for 6 years the bed was rust free for 4 years, the last couple of years it got some surface rust it also works quite well on bare metal that your storing in the shop __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

12-22-2012, 11:12 PM	#321
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,339	Re: 1959 Fleetside REBORN Hey Shadow, Since you're relatively local to me, who did your blasting? Would you recommend them? Seems like they were careful not to warp anything, is that accurate?

12-23-2012, 02:39 PM	#322
shadow1967 Senior Member Join Date: Jul 2011 Location: Hawthorne, CA Posts: 458	Re: 1959 Fleetside REBORN Dan in Pasadena, I will have to look for it. but it was orange county, Pickup and delivery was 75 dollars not bad. __________________ Build for my 1959 Fleetside... http://67-72chevytrucks.com/vboard/s...d.php?t=518308



Register or Log In To remove these advertisements.

12-23-2012, 02:52 PM	#323
shadow1967 Senior Member Join Date: Jul 2011 Location: Hawthorne, CA Posts: 458	Re: 1959 Fleetside REBORN http://primo-powder.clickforward.com...ating+services Here is a link to there website. Hope thats OK admin, if not delete. Brian was the guy I talked to. Price was 1100. They use aluminum ozide for media. They do not remove bondo unless you tell them to, it takes time to remove if applied correctly. __________________ Build for my 1959 Fleetside... http://67-72chevytrucks.com/vboard/s...d.php?t=518308

01-07-2013, 08:37 AM	#324
R.A.D Account Suspended Join Date: Aug 2010 Location: richmond ill Posts: 376	Re: 1959 Fleetside REBORN great build. looking forward to more efforts

01-07-2013, 04:47 PM	#325
R.A.D Account Suspended Join Date: Aug 2010 Location: richmond ill Posts: 376	Re: 1959 Fleetside REBORN double post

Register or Log In To remove these advertisements.