1963 C10 SWB Big Window Build - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

likaroc13 · 12-29-2010, 08:40 PM

awesome man...glad you took pics, cuz i was about to ask how you ran the exhaust....sounds cool!

DRTYRAT30 · 12-29-2010, 09:17 PM

Quote:

Originally Posted by daverod

Why did you put your tank and compressors in back of the axle?

Just liked it there, Im not going to move the fuel tank.

lownslw64 · 12-31-2010, 02:14 AM

DRTYRAT30, your truck looks awesome!! how did you figure out your driveline specs to have it built? I am going to have the same thing done shortly on mine.

creep · 12-31-2010, 10:15 AM

When I had mine done the shop that did it told me what measurements they needed. I think it was from the tail shaft housing to the center of the carrier bearing mount, then from the center of the carrier bearing mount to the edge of the pinion yoke (center of rear u-joints) at full lift, all the way down and at ride height.

DRTYRAT30 · 12-31-2010, 02:26 PM

I used this link

http://www.dennysdriveshaft.com/app/...iagrams/m.html

and printed this form out then took it to my Drivline guy. The angles were figured out by me and Nate at Porterbuilt.

62 Bowtie · 01-02-2011, 03:46 PM

Cool stuff man hey can you run dual compressors with the vu4?

DRTYRAT30 · 01-07-2011, 09:02 PM

You can run as many as you need, because they are ported to the tank. I will add another one to the other side, one is a little slow. The VU4 has two intake ports that you can run line from the tank. Thanks

64shortc10 · 01-08-2011, 07:20 PM

Quote:

Originally Posted by DRTYRAT30

Thanks guys... It is sweet, i think im in love. These trucks are so cool man, and the sound of a crisp glasspack from a warm SBC is the best. I'm out wheel/tire shopping now. I say this with all my projects but i dont think i ever want to sell this one....

Did you find a wheel and tire while out shopping? If so what did you end up getting 15's or 22's? Truck looks great! I just order my trailing arms so I'm looking forward to getting those!
Tony from Norcal
Posted via Mobile Device

higgiec10 · 01-08-2011, 11:02 PM

thats one clean truck i want it lol

DRTYRAT30 · 01-08-2011, 11:05 PM

Well I went over to Stockton Wheel and think I'm having them make me some 15" steel smoothies with a 2 3/4 WW and a set of the bullet center caps and the wheels will get powder coated in a dark red like the interior of the truck.

http://www.stocktonwheel.com/index.php
Posted via Mobile Device

62 Bowtie · 01-08-2011, 11:12 PM

cool thats where I got mine from

DRTYRAT30 · 01-08-2011, 11:34 PM

62 bowtie, what are the specs on you rim & tires? They look clean. I never used Stockton wheel before, I used to go to Pete Paulsen's
Posted via Mobile Device

62 Bowtie · 01-08-2011, 11:43 PM

they are 15x7s cant remember the backspace but i am running disc brakes and I do remember thats what I told that guy with the glasses he's the owner cant remember his name. I did buy the moons and rings from Paulsens tho

DRTYRAT30 · 01-08-2011, 11:50 PM

Are those bias ply's tires like a L78?
Posted via Mobile Device

62 Bowtie · 01-08-2011, 11:56 PM

Yeah L78 plys they are tall like 30 in. with 3" whitewall you can get em here in sac at vintage ford like 120 ea

DRTYRAT30 · 01-09-2011, 12:10 AM

Cool, I'm looking at a killer package deal with Frank Mauro from Stockton wheel. The tires are from diamondback 205/75-15 w) 2 3/4" WW. 27" tall. Thanks again man, Jesse
Posted via Mobile Device

DRTYRAT30 · 01-25-2011, 10:24 PM

Got some new wheels

15 x 6 chrome smoothies with bullet caps and 205/75-15 2 1/2" WW all from Summit for a good deal and at my door in 3 days...

Dinos63 · 01-25-2011, 10:27 PM

Perrrrfect!!! You nailed it kat!!!

likaroc13 · 01-25-2011, 10:39 PM

man, that's sweet...that wheel/tire combo looks great!

bharrison1 · 01-25-2011, 11:05 PM

Great choice on wheel and tire combo!!!!!!!!!!!!

jasonhall · 01-25-2011, 11:22 PM

cool

JNJchev77 · 01-25-2011, 11:25 PM

Perfect!

62 Bowtie · 01-25-2011, 11:51 PM

looks awsome good choice

ratty 46 · 01-26-2011, 12:04 AM

I can say nothing except .... perfect!

Ratty 46

jimmydean · 01-26-2011, 12:24 AM

Damn, those wheels look perfect. Nice work.

12-29-2010, 08:40 PM	#301
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 1963 C10 SWB Big Window Build awesome man...glad you took pics, cuz i was about to ask how you ran the exhaust....sounds cool!

12-31-2010, 02:14 AM	#303
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 C10 SWB Big Window Build DRTYRAT30, your truck looks awesome!! how did you figure out your driveline specs to have it built? I am going to have the same thing done shortly on mine. __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

12-31-2010, 10:15 AM	#304
creep Registered Loser Join Date: Jun 2009 Location: Elyria, OH Posts: 1,523	Re: 1963 C10 SWB Big Window Build When I had mine done the shop that did it told me what measurements they needed. I think it was from the tail shaft housing to the center of the carrier bearing mount, then from the center of the carrier bearing mount to the edge of the pinion yoke (center of rear u-joints) at full lift, all the way down and at ride height. __________________ ((..)) ((0)) '63 GMC lwb, 383, th350, lays frame, genuine patina. The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267 '88 Astro cargo bagged, shaved, phantom grille. SOLD '50 Chevy 2 door sedan awaiting attention. 2014 Silverado Ext cab, 5.3, daily driver.

12-31-2010, 02:26 PM	#305
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build I used this link http://www.dennysdriveshaft.com/app/...iagrams/m.html and printed this form out then took it to my Drivline guy. The angles were figured out by me and Nate at Porterbuilt.

01-02-2011, 03:46 PM	#306
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: 1963 C10 SWB Big Window Build Cool stuff man hey can you run dual compressors with the vu4? Attached Images Last edited by 62 Bowtie; 01-02-2011 at 03:50 PM.

01-07-2011, 09:02 PM	#307
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build You can run as many as you need, because they are ported to the tank. I will add another one to the other side, one is a little slow. The VU4 has two intake ports that you can run line from the tank. Thanks

01-08-2011, 11:02 PM	#309
higgiec10 Registered User Join Date: Dec 2005 Location: baytown Posts: 243	Re: 1963 C10 SWB Big Window Build thats one clean truck i want it lol

01-08-2011, 11:05 PM	#310
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Well I went over to Stockton Wheel and think I'm having them make me some 15" steel smoothies with a 2 3/4 WW and a set of the bullet center caps and the wheels will get powder coated in a dark red like the interior of the truck. http://www.stocktonwheel.com/index.php Posted via Mobile Device

01-08-2011, 11:12 PM	#311
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: 1963 C10 SWB Big Window Build cool thats where I got mine from Attached Images

01-08-2011, 11:34 PM	#312
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build 62 bowtie, what are the specs on you rim & tires? They look clean. I never used Stockton wheel before, I used to go to Pete Paulsen's Posted via Mobile Device

01-08-2011, 11:43 PM	#313
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: 1963 C10 SWB Big Window Build they are 15x7s cant remember the backspace but i am running disc brakes and I do remember thats what I told that guy with the glasses he's the owner cant remember his name. I did buy the moons and rings from Paulsens tho Last edited by 62 Bowtie; 01-08-2011 at 11:43 PM.

01-08-2011, 11:50 PM	#314
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Are those bias ply's tires like a L78? Posted via Mobile Device

01-08-2011, 11:56 PM	#315
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: 1963 C10 SWB Big Window Build Yeah L78 plys they are tall like 30 in. with 3" whitewall you can get em here in sac at vintage ford like 120 ea

01-09-2011, 12:10 AM	#316
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Cool, I'm looking at a killer package deal with Frank Mauro from Stockton wheel. The tires are from diamondback 205/75-15 w) 2 3/4" WW. 27" tall. Thanks again man, Jesse Posted via Mobile Device

01-25-2011, 10:24 PM	#317
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Got some new wheels 15 x 6 chrome smoothies with bullet caps and 205/75-15 2 1/2" WW all from Summit for a good deal and at my door in 3 days...



Register or Log In To remove these advertisements.

01-25-2011, 10:27 PM	#318
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 1963 C10 SWB Big Window Build Perrrrfect!!! You nailed it kat!!! __________________ CHEVY ONLY... Nothin Else !

01-25-2011, 10:39 PM	#319
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 1963 C10 SWB Big Window Build man, that's sweet...that wheel/tire combo looks great!

01-25-2011, 11:05 PM	#320
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 1963 C10 SWB Big Window Build Great choice on wheel and tire combo!!!!!!!!!!!!

01-25-2011, 11:22 PM	#321
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: 1963 C10 SWB Big Window Build cool

01-25-2011, 11:25 PM	#322
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: 1963 C10 SWB Big Window Build Perfect! __________________ 77' Chevy SB Dropmembered Front and Rear 5.3/4l60e combo

01-25-2011, 11:51 PM	#323
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: 1963 C10 SWB Big Window Build looks awsome good choice Last edited by 62 Bowtie; 01-25-2011 at 11:53 PM.

01-26-2011, 12:04 AM	#324
ratty 46 Registered User Join Date: Jun 2009 Location: Atlanta, Ga. Posts: 1,104	Re: 1963 C10 SWB Big Window Build I can say nothing except .... perfect! Ratty 46

01-26-2011, 12:24 AM	#325
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: 1963 C10 SWB Big Window Build Damn, those wheels look perfect. Nice work. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

Register or Log In To remove these advertisements.