How about some pics of Static Dropped C-10's - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JonFrankMc · 01-31-2013, 10:02 PM

my '71 stepper. 2.5" drop spindles and 3" springs in the back. 275/60/r15 on all 4 corners. Perfect for what I was looking for.

JonFrankMc · 04-12-2014, 02:18 PM

Quote:

Originally Posted by JonFrankMc

my '71 stepper. 2.5" drop spindles and 3" springs in the back. 275/60/r15 on all 4 corners. Perfect for what I was looking for.

Took a HUGE hiatus while playing with my TBSS. Drug the truck out of the garage and put staggered steelies on for better clearance upfront. Like the look, jury is still out on the hubcaps

Patina'd_402 · 04-14-2014, 11:53 AM

Robznob11 · 04-22-2014, 09:34 PM

here is mine and its gonna have to have new front tires. its to low for comfort!!! these are 225/50/15 im fixing to put 255/60/15 so we will see what it looks like. its kinda a balancing act caus Im pretty sure after the tire swap im going to have to trim fenders and maybe relocate hood hinges

Dobster · 04-23-2014, 10:17 AM

Quote:

Originally Posted by Robznob11

here is mine and its gonna have to have new front tires. its to low for comfort!!! these are 225/50/15 im fixing to put 255/60/15 so we will see what it looks like. its kinda a balancing act caus Im pretty sure after the tire swap im going to have to trim fenders and maybe relocate hood hinges

I would get a tire that is as tall as the back for a level look that fills out the front wheel well.

knomadd · 04-23-2014, 12:07 PM

Quote:

Originally Posted by Robznob11

here is mine and its gonna have to have new front tires. its to low for comfort!!! these are 225/50/15 im fixing to put 255/60/15 so we will see what it looks like. its kinda a balancing act caus Im pretty sure after the tire swap im going to have to trim fenders and maybe relocate hood hinges

I'm not sure what your wheel specs are, but I've got 265's (although on a 22" wheel) on all four corners of mine, without rubbing problems. 255's should be fine, if your tires aren't too close to the fender now. If you're concerned about rubbing the fenders, you could always just go taller, not wider. Say a 225/75/15? Just a thought.

Chvy2NV · 02-01-2013, 01:24 AM

What are the guys running the 5/7 5/8 static dropped trucks using in the rear? What notch and blocks?
Posted via Mobile Device

fatgump · 02-01-2013, 10:51 PM

I have cpp springs, cpp notch and a 1" block

cdog73 · 05-10-2013, 01:10 AM

Quote:

Originally Posted by fatgump

I have cpp springs, cpp notch and a 1" block

So what is the total drop on this and what size wheels are you running?

chevjayfsd · 02-13-2013, 09:42 PM

My Bucket.

Jarwood · 02-13-2013, 09:46 PM

Beautiful Truck! What color red is that? Nice!

chevjayfsd · 02-13-2013, 10:03 PM

Quote:

Originally Posted by Jarwood

Beautiful Truck! What color red is that? Nice!

Thanks! It's good ol Torch Red.
Posted via Mobile Device

fastcam1 · 02-13-2013, 10:55 PM

Bucket lol ya right!
Posted via Mobile Device

Denopholous · 02-26-2013, 05:46 PM

THis is my first time to post here. what a great place to get info.This is my '70 I just starded on. I just finished the drop this weekend. 5" drop coils in the rear, 3" drop coils in front all CCP. McGaughy's 2.5 Drop spindles and Disc conversion in the front. Replaced axle shafts with shafts from 1979 Chevy Truck to get the 5 lug. These are just my roller wheels tht were on the donor truck that had the axles so I can roll her around till I'm ready for my real ones.I still havent replaced the shocks yet. I'm not sure which ones to get for it.

Denopholous · 02-26-2013, 05:48 PM

couldnt get the pics to work here they are

Denopholous · 02-26-2013, 05:52 PM

Denopholous · 02-26-2013, 05:54 PM

Project Nico · 03-09-2013, 09:29 PM

Here is my 79 Name: 066.jpg
Views: 9451
Size: 40.7 KB

Fan2zee · 03-10-2013, 04:51 AM

Quote:

Originally Posted by Project Nico

Here is my 79Attachment 1073266

Nice!
Posted via Mobile Device

ivorton74 · 03-18-2013, 02:30 PM

Quote:

Originally Posted by Project Nico

Here is my 79Attachment 1073266

whoa mama!!

**RPOZ11** · 09-02-2013, 03:16 PM

Quote:

Originally Posted by Project Nico

Here is my 79Attachment 1073266

I like your truck!

What are you running in it?

kerrdog · 09-02-2013, 08:12 PM

I am running 255/40/20 and 315/35/20 toyo proxes st
Posted via Mobile Device

bohmankid · 09-04-2013, 01:19 AM

I put a new static drop and wheels on my truck.
5" western chassis flip kit in rear.
3" djm spindles matched with 2" djm coils up front.
17" wheels.
Name: IMG_0864.jpg
Views: 16187
Size: 47.0 KB

Name: IMG_0864.jpg
Views: 16187
Size: 47.0 KB

Name: IMG_0866.jpg
Views: 10648
Size: 63.6 KB

Chvy2NV · 03-19-2013, 09:24 PM

Sweet ride nico!!
Posted via Mobile Device

Project Nico · 03-19-2013, 10:17 PM

Thanks guys.

01-31-2013, 10:02 PM	#1
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: How about some pics of Static Dropped C-10's my '71 stepper. 2.5" drop spindles and 3" springs in the back. 275/60/r15 on all 4 corners. Perfect for what I was looking for. Last edited by JonFrankMc; 01-31-2013 at 11:06 PM.

04-14-2014, 11:53 AM	#3
Patina'd_402 Registered User Join Date: Apr 2013 Location: The Liberal Capitol of Commiefornia Posts: 63	Re: How about some pics of Static Dropped C-10's __________________ '70/C10/402/TH400.

04-22-2014, 09:34 PM	#4
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,937	Re: How about some pics of Static Dropped C-10's here is mine and its gonna have to have new front tires. its to low for comfort!!! these are 225/50/15 im fixing to put 255/60/15 so we will see what it looks like. its kinda a balancing act caus Im pretty sure after the tire swap im going to have to trim fenders and maybe relocate hood hinges Attached Images __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

02-01-2013, 01:24 AM	#7
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: How about some pics of Static Dropped C-10's What are the guys running the 5/7 5/8 static dropped trucks using in the rear? What notch and blocks? Posted via Mobile Device

02-01-2013, 10:51 PM	#8
fatgump Registered User Join Date: Apr 2011 Location: Arizona Posts: 249	Re: How about some pics of Static Dropped C-10's I have cpp springs, cpp notch and a 1" block Attached Images

02-13-2013, 09:42 PM	#10
chevjayfsd Project 7dos Join Date: Aug 2001 Location: Abilene, Texas Posts: 876	Re: How about some pics of Static Dropped C-10's My Bucket. __________________ 7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290

02-13-2013, 09:46 PM	#11
Jarwood Registered User Join Date: Oct 2011 Location: Jefferson, Georgia Posts: 248	Re: How about some pics of Static Dropped C-10's Beautiful Truck! What color red is that? Nice!

02-13-2013, 10:55 PM	#13
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: How about some pics of Static Dropped C-10's Bucket lol ya right! Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

02-26-2013, 05:46 PM	#14
Denopholous Registered User Join Date: Aug 2012 Location: Georgetown, TX Posts: 8	Re: How about some pics of Static Dropped C-10's THis is my first time to post here. what a great place to get info.This is my '70 I just starded on. I just finished the drop this weekend. 5" drop coils in the rear, 3" drop coils in front all CCP. McGaughy's 2.5 Drop spindles and Disc conversion in the front. Replaced axle shafts with shafts from 1979 Chevy Truck to get the 5 lug. These are just my roller wheels tht were on the donor truck that had the axles so I can roll her around till I'm ready for my real ones.I still havent replaced the shocks yet. I'm not sure which ones to get for it. Last edited by Denopholous; 02-26-2013 at 05:55 PM. Reason: pics didnt work

02-26-2013, 05:48 PM	#15
Denopholous Registered User Join Date: Aug 2012 Location: Georgetown, TX Posts: 8	Re: How about some pics of Static Dropped C-10's couldnt get the pics to work here they are Last edited by Denopholous; 02-26-2013 at 05:55 PM. Reason: pic didnt work

02-26-2013, 05:52 PM	#16
Denopholous Registered User Join Date: Aug 2012 Location: Georgetown, TX Posts: 8	Re: How about some pics of Static Dropped C-10's

02-26-2013, 05:54 PM	#17
Denopholous Registered User Join Date: Aug 2012 Location: Georgetown, TX Posts: 8	Re: How about some pics of Static Dropped C-10's

03-09-2013, 09:29 PM	#18
Project Nico Registered User Join Date: Feb 2011 Location: Bell Gardens, CA Posts: 114	Re: How about some pics of Static Dropped C-10's Here is my 79

09-02-2013, 08:12 PM	#22
kerrdog Registered User Join Date: Apr 2010 Location: kosciusko ms Posts: 44	Re: How about some pics of Static Dropped C-10's I am running 255/40/20 and 315/35/20 toyo proxes st Posted via Mobile Device

09-04-2013, 01:19 AM	#23
bohmankid Registered User Join Date: Nov 2012 Location: Salt Lake City, UT Posts: 520	Re: How about some pics of Static Dropped C-10's I put a new static drop and wheels on my truck. 5" western chassis flip kit in rear. 3" djm spindles matched with 2" djm coils up front. 17" wheels. __________________ My 1985 GMC 4x4 LS swap build thread R.I.P. My 1978 Big Ten, Big Block build thread Moby: My Chevy 4x4 ls swap build thread



Register or Log In To remove these advertisements.

03-19-2013, 09:24 PM	#24
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: How about some pics of Static Dropped C-10's Sweet ride nico!! Posted via Mobile Device

03-19-2013, 10:17 PM	#25
Project Nico Registered User Join Date: Feb 2011 Location: Bell Gardens, CA Posts: 114	Re: How about some pics of Static Dropped C-10's Thanks guys.

Register or Log In To remove these advertisements.