What did you do to your truck today? Chapter II - Page 133 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sportside · 02-28-2016, 09:14 PM

I installed a tach/vacuum cluster, floor shift tilt column, steering wheel and buddy buckets.

flashed · 02-28-2016, 09:46 PM

The gauge cluster and BuddyBuckets look great .

Security guy · 02-28-2016, 09:51 PM

Painted my wheels and got some new rubber installed...

Name: 12795359_10207623915369982_1048829483924211355_n.jpg
Views: 638
Size: 40.0 KB

Name: 12806210_10207624805632238_3929165710594105210_n.jpg
Views: 634
Size: 42.6 KB

73737373 · 02-29-2016, 09:35 AM

Quote:

Originally Posted by New_70'C10

Hey 73737373, is that your permanent plate or is that just for show on your bumper there? If so how did you get it registered with the original plate?

Thanks,
Charles.

OK will allow you to use an old license plate. You have to get a "real" tag and keep it in the truck w/you. It costs $21.50 to use the old one.

73737373 · 02-29-2016, 09:38 AM

Quote:

Originally Posted by 89AKurt

Never heard of this before, thanks! Better than Coke, no sugar.

This was getting messy, and scary....

Much better, and new rubber brake lines too.

Nice. Go to their website and they'll let you post before/after pics. I sent them some a couple weeks ago, but haven't checked the site.

73737373 · 02-29-2016, 10:56 AM

More pics.... Was quite a bit of decay along the bottom of the skin so had my upholstery guy sew a strip along the bottom. I thought the mismatching colors was better than a ragged finish.

I glued the skin to a metal door panel. The wrinkles are from where the foam separated from the vinyl and I did not peel all that off from the backside of the skin to reglue it. I did it on the driver side door skin, and it's a miserable job. There's the vinyl, the foam and then the paper, and the foam/paper is heat sealed to the embossed areas on the door panel. Hard to explain.

I need some matching color estucheons!!

73737373 · 02-29-2016, 11:06 AM

Hood. Not sure if I'm going to be able to save it, or have to get it repainted..... I did the passenger side and it came out OK. The spots that have paint on them shine like new. Found myself buffing a lot of black primer to a shine.... Very delicate balance to get the dead paint off to find some that I can work, without going all the way to the bare metal.

73737373 · 02-29-2016, 11:13 AM

Rear sport bumper. Patina truck needs a patina bumper, although am toying w/putting a new one on.

My little helper in the lower left on the 1st picture.

73737373 · 02-29-2016, 11:17 AM

And redid a wheel... Lots of sanding, some SEM primer, more sanding and Rustoleum professional gloss white. Magic!!

Jose's 69 · 02-29-2016, 12:27 PM

Started my front suspension rebuild and disc brake conversion.

vidman · 03-01-2016, 08:51 PM

Installed my dash-pad and did some interior wiring

firedemon · 03-01-2016, 09:17 PM

a little further today

tlman · 03-01-2016, 09:23 PM

waiting for rad support to test engine ,hasn't been run yet, drive shaft coming checked out wiring harness .gotta paint headers ,but I'm gonna take a break tonight

midniteblues · 03-02-2016, 09:50 AM

Finished these up yesterday. I didn't notice they screwed up and gave me 3/4" bolts for the hooks gotta go back and get 5/8".

The knob on the hubs has some pits in them that took black paint when I sprayed the letters. they look good enough 4 me.
Wrap m box m and on the self they both go for a while till I'm ready for them.

OregonNed · 03-03-2016, 04:55 PM

Polishing up my bed strips in anticipation of the new boards

73737373 · 03-03-2016, 05:57 PM

Quote:

Originally Posted by OregonNed

Polishing up my bed strips in anticipation of the new boards

Just about the prettiest thing on these trucks is a refinished wood floor bed w/the stainless strips.

firedemon · 03-04-2016, 09:33 PM

not a lot but dash is done

89AKurt · 03-05-2016, 12:25 AM

Replaced the transmission mount. Some of you might get a kick out of my sophisticated "shade tree mechanic" jack.

Metaldoc · 03-05-2016, 01:44 AM

new booster, master, proportional valve, brackets, and lines, lines and brackets from scratch.

OregonNed · 03-05-2016, 01:51 AM

Almost done with the strips

OregonNed · 03-05-2016, 01:53 AM

One more

magwakeenercew2jh · 03-05-2016, 01:54 AM

Quote:

Originally Posted by 89AKurt

Replaced the transmission mount. Some of you might get a kick out of my sophisticated "shade tree mechanic" jack.

I REALLY like it.

It stumps me, though.
Then again, I'm pretty loggy tonight.

toolboxchev · 03-05-2016, 02:59 AM

Quote:

Originally Posted by 89AKurt

Replaced the transmission mount. Some of you might get a kick out of my sophisticated "shade tree mechanic" jack.

I am kinda stumped by that comment also. That more conventional that anything I know.

Woodnt know any other way to get things done.

89AKurt · 03-05-2016, 04:03 AM

You guys crack me up.

doo142 · 03-05-2016, 06:55 AM

Got Rusty's cab markers glowing . Cleaned, greased, bulbs, replaced lenses with mo betta oem ones.

02-28-2016, 09:14 PM	#3301
sportside Registered User Join Date: Jul 2013 Location: anderson Posts: 27	Re: What did you do to your truck today? Chapter II I installed a tach/vacuum cluster, floor shift tilt column, steering wheel and buddy buckets. Attached Images

02-28-2016, 09:46 PM	#3302
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: What did you do to your truck today? Chapter II The gauge cluster and BuddyBuckets look great .

02-28-2016, 09:51 PM	#3303
Security guy Registered User Join Date: Mar 2008 Location: Sarasota, Fl. Posts: 441	Re: What did you do to your truck today? Chapter II Painted my wheels and got some new rubber installed...

02-29-2016, 10:56 AM	#3306
73737373 Registered User Join Date: Sep 2005 Location: Oklahoma USA Posts: 1,000	Re: What did you do to your truck today? Chapter II More pics.... Was quite a bit of decay along the bottom of the skin so had my upholstery guy sew a strip along the bottom. I thought the mismatching colors was better than a ragged finish. I glued the skin to a metal door panel. The wrinkles are from where the foam separated from the vinyl and I did not peel all that off from the backside of the skin to reglue it. I did it on the driver side door skin, and it's a miserable job. There's the vinyl, the foam and then the paper, and the foam/paper is heat sealed to the embossed areas on the door panel. Hard to explain. I need some matching color estucheons!! Attached Images

02-29-2016, 11:06 AM	#3307
73737373 Registered User Join Date: Sep 2005 Location: Oklahoma USA Posts: 1,000	Re: What did you do to your truck today? Chapter II Hood. Not sure if I'm going to be able to save it, or have to get it repainted..... I did the passenger side and it came out OK. The spots that have paint on them shine like new. Found myself buffing a lot of black primer to a shine.... Very delicate balance to get the dead paint off to find some that I can work, without going all the way to the bare metal. Attached Images

02-29-2016, 11:13 AM	#3308
73737373 Registered User Join Date: Sep 2005 Location: Oklahoma USA Posts: 1,000	Re: What did you do to your truck today? Chapter II Rear sport bumper. Patina truck needs a patina bumper, although am toying w/putting a new one on. My little helper in the lower left on the 1st picture. Attached Images

02-29-2016, 11:17 AM	#3309
73737373 Registered User Join Date: Sep 2005 Location: Oklahoma USA Posts: 1,000	Re: What did you do to your truck today? Chapter II And redid a wheel... Lots of sanding, some SEM primer, more sanding and Rustoleum professional gloss white. Magic!! Attached Images

02-29-2016, 12:27 PM	#3310
Jose's 69 Registered User Join Date: Oct 2015 Location: Norwalk, CA Posts: 114	Re: What did you do to your truck today? Chapter II Started my front suspension rebuild and disc brake conversion. Attached Images

03-01-2016, 08:51 PM	#3311
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: What did you do to your truck today? Chapter II Installed my dash-pad and did some interior wiring Attached Images __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

03-01-2016, 09:17 PM	#3312
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: What did you do to your truck today? Chapter II a little further today Attached Images

03-01-2016, 09:23 PM	#3313
tlman Registered User Join Date: May 2014 Location: rodney ,ontario canada Posts: 111	Re: What did you do to your truck today? Chapter II waiting for rad support to test engine ,hasn't been run yet, drive shaft coming checked out wiring harness .gotta paint headers ,but I'm gonna take a break tonight Attached Images

03-02-2016, 09:50 AM	#3314
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: What did you do to your truck today? Chapter II Finished these up yesterday. I didn't notice they screwed up and gave me 3/4" bolts for the hooks gotta go back and get 5/8". The knob on the hubs has some pits in them that took black paint when I sprayed the letters. they look good enough 4 me. Wrap m box m and on the self they both go for a while till I'm ready for them. Attached Images __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

03-03-2016, 04:55 PM	#3315
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today? Chapter II Polishing up my bed strips in anticipation of the new boards Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

03-04-2016, 09:33 PM	#3317
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: What did you do to your truck today? Chapter II not a lot but dash is done Attached Images

03-05-2016, 12:25 AM	#3318
89AKurt Registered User Join Date: Dec 2015 Location: Prescott Arizona Posts: 621	Re: What did you do to your truck today? Chapter II Replaced the transmission mount. Some of you might get a kick out of my sophisticated "shade tree mechanic" jack. __________________ 1968 Long Bed 2016 Honda Civic Coupe EX-T ticket magnet



Register or Log In To remove these advertisements.

03-05-2016, 01:44 AM	#3319
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II new booster, master, proportional valve, brackets, and lines, lines and brackets from scratch. Attached Images

03-05-2016, 01:51 AM	#3320
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today? Chapter II Almost done with the strips Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

03-05-2016, 01:53 AM	#3321
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today? Chapter II One more Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

03-05-2016, 04:03 AM	#3324
89AKurt Registered User Join Date: Dec 2015 Location: Prescott Arizona Posts: 621	Re: What did you do to your truck today? Chapter II You guys crack me up. __________________ 1968 Long Bed 2016 Honda Civic Coupe EX-T ticket magnet

03-05-2016, 06:55 AM	#3325
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,118	Re: What did you do to your truck today? Chapter II Got Rusty's cab markers glowing . Cleaned, greased, bulbs, replaced lenses with mo betta oem ones. Attached Images __________________ 72 Cheyenne k/20, Custom Camper 72 Cheyenne k/20 71 blazer K/5 2WD 454, 6 sp. 67 Chevy Napco c30 Dump 56 GMC Napco 4x4 short step 66 Chevy K10 68 Chevy C/30 4x4

Register or Log In To remove these advertisements.