Post Your Craigslist Finds Part 2

[HO455]

From Bring a Trailer. Nice driver 72 Super Cheyenne 4x4. Original 2wd converted to 4x4 and looks to have had a BBC from the factory and now its a SBC. Nice color combo with the right amount of lift. Not mine. I wonder where that BBC went to?

https://bringatrailer.com/listing/19...4x4-pickup-47/

This 1972 Chevrolet pickup was built as a two-wheel-drive C10 Cheyenne Super model and was converted to four-wheel-drive under prior ownership. The truck was acquired by the seller in 2018, and subsequent work consisted of installing a 350ci small-block V8 crate engine, resealing the four-speed manual transmission and dual-range transfer case, and replacing various braking, suspension, and fuel system components. Finished in two-tone yellow and white over green vinyl upholstery, the truck also features a cab visor with clearance lights in addition to a sliding rear window, a Draw-Tite receiver hitch, camper mirrors, white-finished 15″ steel wheels, manually locking front hubs, power steering, Skyjacker shocks, and power-assisted front disc brakes as well as a Custom Autosound digital stereo, air conditioning, a Robyn CB radio, and a fire extinguisher. This C10 4×4 conversion is now offered with manufacturer’s literature, partial service records, and an Ohio title in the seller’s name.

[Wikid61]

https://spokane.craigslist.org/cto/d...684703540.html 1971 Chev 3/4 Ton with rebuilt engine, good running Pickup - $4,500

[Wikid61]

https://sanantonio.craigslist.org/ct...684543048.html $22,500.00, 454, 543 roller cam, roller rockers , 148 heads polished and ported.
Wiend intake, edelbrock carb,
AC , atomatic turbo 400, 2800 rpm converter, disc brakes, power steering, four pass radiator/electric fan.
Dual magnaflo exhaust/electric cutouts.
Stainless steel headers, 12 bolt positrac, air shocks.

Cash only
Don’t need help to sell
Clean title in my name
Low ball offers will be ignored
Serious inquiries only.
NO JOY RIDES

[Wikid61]

https://rmn.craigslist.org/cto/d/rus...685049267.html Selling my 1970 GMC single rear wheel axel one ton, with utility bed and Alasken camper.
I drove this back from AZ, there is no rust.
16,000.00 OBO need to sell.
Calls only for more details 50seven..4five8....one 6 nine 9.
Thank you.

[Wikid61]

https://sandiego.craigslist.org/csd/...684955984.html 1970 Chevy C20 pickup slightly lifted with 33 tires. Has a nice stance to it. Engine compartment completely revamped, wiring Etc. Engine runs good, has a custom rack for you guys who work and need carry lumber. Original Dash tech works. 350 engine and automatic transmission. Come see it if you're interested. Asking $16,500

[Wikid61]

https://losangeles.craigslist.org/ws...684775718.html 1969 gmc pickup 2 nd owner. Great shape it has a 350 engine with a cam intake header’s have done a lot to it vintage air blows cold! It has a 400 transmission new u joints. Truck runs great! $22,000 Call Tom at show contact info for any questions. Serious buyers only!!!
do NOT contact me with unsolicited services or offers

[Wikid61]

1969 chevy c10 original short bed step side this truck was restored 5 years back with new paint ,new all glass with weather stripping runs really good for is age has no rust all lights work blinkers as it should ( has no power steering no power brakes )
Tires are like new motor traight line 6 with 3 speed manual transmission on the floor
Runs beautiful, good for a Ls swap beautiful truck $17,500 obo show contact info clean tx tittle https://dallas.craigslist.org/dal/ct...686568953.html

[Wikid61]

https://joplin.craigslist.org/cto/d/...686497759.html 68 chevy 383 stroker 1000 miles on new motor clean title

[Wikid61]

https://grandrapids.craigslist.org/c...686387678.html For sale. 1967 Chevrolet C-10 CST shortbed truck. Solid / Dry Oklahoma truck. Truck has spent its entire life in the OKC area. Was originally a 327 v8, hydromatic truck with A/C. Original paint was Oklahoma University colors, Crimson paint with a Cream ballcap top. This is a unaltered shortbed truck. Not a cut down long bed. Rare panoramic rear glass. Yes, a big window 67 (listed on the spid sheet). Clean title matches the vin on the cab, spid sheet in the glove box and the numbers stamped in the frame. Build your dream truck! This is not a rusted out Michigan turd. Truck still has its original rockers and cab corners. Steel bed floor is nice and not rusted through. No engine or trans. I do have the drive shaft and a few other parts. Will be glad to asist with loading onto your trailer. Not interested in trades. Asking $10,000 or best. Located south of Hastings, Mi. Shown dog dish caps not included. May be able to hook you up with similar ones. I also have a better set of rims and tires if you need them.

[Wikid61]

https://tulsa.craigslist.org/cto/d/o...686404374.html This truck is an original short bed frame with long bed shortened. It has a 2004 5.3 with 4L60E with approximately 130,000 miles.
CPP front drop spindles and springs
CPP rear drop springs and blocks
5 lug conversion front and rear
Disc conversion with power brake booster
15 gallon aluminum fuel cell( mounted in rear)
Power steering, Walbro fuel pump
New door seals , window seals
20x8.5 front and 20x10 rear Ridler wheels
New houndstooth seat cover
New carpet, new sills
Johnny Law motor mounts
This is a great solid running truck.. The previous owner did the work on truck. I have owned truck for 5 years without any problems .


The only thing truck needs is a heater core. I never needed it due to only driving truck on nice days. There is no speedometer or gas gauge. I gauge the fuel by looking into fuel cell. Truck is wired for digital gauge clusters. You could do vintage air as well. Price 24,0000 or best offer. Call or text.

[Wikid61]

https://monroe.craigslist.org/cto/d/...685886746.html 1970 Chevy C10 Long Wheel Base. 99% rust free. This is a factory air truck with a new compressor converted to R134a (Needs Condenser and charged), Factory 402 Big Block, Holley 4 barrel carburator, Turbo 400 automatic, power steering, new tilt steering column, new starter, new fuel tank, converted to electric fuel pump, has mechanical fuel pump and all plumbing still in place, and new battery. Don't know the rear end gear ratio. This truck can be a daily driver

[Wikid61]

https://columbus.craigslist.org/cto/...685392712.html Originally a long bed truck, I cut the frame down with a Brothers Trucks kit, and cut the bedsides down myself as well. Frame was welded and bolted back together. All the parts listed below are new beginning with Winter of 2021, with many parts (alternator, power steering pump/box/hoses, seats, tires, wheels, steering column, ignition switch, steering wheel) new as of Summer 2023.

Interior:
Custom bucket seats with center console/jump seat from a 2015 Silverado.
New Silver Sport Transmissions Tremec 5 speed manual transmission with hydraulic clutch, installed by Procar Associates in Akron in March 2022.
AirLift Performance air ride management system.
Brown carpet.
Chrome Holley steering column with tilt.
Ignition switch.
Lokar aluminum pedals.
Dakota Digital gauges, WORKING fuel gauge, clock, tach (truck didn't originally come with clock).
Lokar door/window handles.
Earlier model C10 arm rests.
Comfort Grip steering wheel.
New windshield.

Engine/under hood:
Holley Sniper fuel injection on the 355 small block Chevy engine, Hedman ceramic shorty headers (needed to keep the exhaust tucked in the frame rails).
Billet valve covers with script Chevy.
HEI distributor (came on the truck)
Body color air cleaner cover
LEEDS chrome master cylinder
Powermaster 150 amp alternator.
Power steering pump, box, hoses.
Optima Yellow Top battery.

Suspension/brakes
POL tubular upper control arms.
Cupped factory lower control arms.
Porterbuilt Fab step notch in the rear.
Firestone bags.
QA-1 shocks.
Wilwood modular front spindles and Wilwood 6 piston brakes all around with drilled/slotted rotors.
Detroit Steel Wheels 20" D-Town smoothie wheels with chrome center caps and stainless steel trim rings.
Converted to five-lug wheels.
Lock-Rite rear locker.
All new tie rod ends, drag link.
Custom two-piece driveshaft made by Heavy Duty Truck Parts in Newark.

Body:
New passenger side door (new glass, ALL internals, vent window).
Boyd Welding gas tank under the bed floor (I left the original fuel neck on the cab for the look), with Aeromotive in tank pump.
New grill.
LED sequential rear turn signals/tail lights and front turn signals.
Billet aluminum hood hinges.
Custom extruded aluminum raised bed floor with widened tubs.
I repainted it Winter of 2022/2023 to the factory Teal. The cab roof is original, and patina on the hood is real, I "recreated" the patina on the bed and fenders/doors.
I built the entire exhaust system myself, as you can see it exits on the sides in front of the rear tires. Due to space "restrictions" under this thing it's running cherry-bomb mufflers.

There are things not done yet (it needs a new cab wiring harness, rusty floor braces underneath, I have a new driver side floor pan, engine could use cleaned up but I never got around to tearing it down to clean/repaint it.) The casting numbers tell me it's a 1969 engine, no way to tell if it's original to the truck but I'm guessing it is. With the air ride it rides smooth as glass. Doesn't have heat or AC, doesn't get driven in the winter and it's got two windows and the vents are AC. It lays frame out back, and "almost" does up front, anybody that knows these things knows the front crossmember hangs lower than the frame rails, it's as low as it can go without putting in an aftermarket front crossmember.

No tire kickers or joy riders, if you aren't serious don't bother. I'm sure there are things I'm forgetting. If ad is up it's available. DON'T NEED HELP SELLING, if you call to offer help selling it, I'll hang up on you. Clean/clear title in my name. $25,000 OBO
Seven four 0, nine seven 5, 1 3 five seven.

TO "LAWRENCE" THE SCAMMER FROM INDY WITH THE MARYLAND PHONE NUMBER, SORRY I CALLED YOUR BLUFF AND ENDED YOUR SCAM BEFORE IT GOT STARTED LOSER


do NOT contact me with unsolicited serv

[Wikid61]

https://sandiego.craigslist.org/nsd/...686573407.html 1971 Chevrolet c10 short bed truck. It currently has a utility bed on it. It is a factory 1/2 ton short bed with 5 lug axles and trailing arm suspension. Easy conversion to pick up bed if you can find one. All suspension has been rebuilt with CPP kit, all new shocks, springs, bushings etc. Lowered 4 inches in front, 1 inch rear. Upgraded gen I 350 V8, headers, holley carb, alum Weiand intake, HEI. New Mishimoto aluminum radiator. Newly rebuilt TH350 trans, less than 100 miles since rebuild. New tires. Truck runs great and rides smooth. New hounds tooth upholstery, new dash pad, glove box and all new heater / defrost hoses. Does not have air conditioning but a/c compressor is installed on this replacement engine. Truck body is pretty good except for rocker panels of course. I have some new reproductions. The rest of cab is good, floor, drip rails etc. originally a orange (code 516) truck. Unique utility truck. $13,200 OBO. call or text. Scott

[Wikid61]

https://losangeles.craigslist.org/lg...686564821.html

[Wikid61]

The truck is in Show Low, Arizona. About two and a half hours from Phoenix. Come take a look . 1968 Chevrolet pickup, c10, long bed, 6 cylinder, three speed on the column, heater, radio delete. 91000+ miles. Very original truck, no rust ever. Original body and paint, no repairs, no fillers. Some patina. Camper has been on it since new. The bed has original wood and paint. California, Arizona truck, second owner. I have owned and garaged it for 28 years. I have its build sheet and original keys. Many new parts. Runs excellent. You will not find another original truck like this. Must see to appreciate. $23900 OBO. 928>521>4333. Make me a reasonable off
https://phoenix.craigslist.org/nph/c...686252499.html

[Wikid61]

https://tucson.craigslist.org/cto/d/...686262747.html 1970 C10 PROJECT TRUCK, EITHER A 350 OR 400 MOTOR (CANT REMEMBER), 3 ON THE TREE, HEADERS, 4 BARREL ALUMINUN INTAKE, NO CARBURETOR, SELLING AS IS WHERE IS.

[Wikid61]

Beautiful 1967 GMC 1/2 ton, short wheel base, pickup for sale. 4x4, 350 engine, automatic transmission, 6668 miles on engine and transmission
Asking $27850.00 will consider partial trade
Call Three Oh 7- 57 Eight Seventy two 69 for more details https://wyoming.craigslist.org/cto/d...686211189.html

[Wikid61]

https://phoenix.craigslist.org/wvl/c...686055354.html 1970 Chevy C10 2WD Longbed SBC 350 V8 Floor 4 Speed Good Title - $5,995 (Buckeye, AZ)1970 Chevy C10 2WD 350 V8 Manual 4 speed on the floor. Project that I won't be able to work on for a while. Truck has been parked for awhile prior own stopped driving it when the upper radiator hose snout broke off, I got as far as ordering a new Summit Racing aluminum radiator. Cap, rotor, and wires is off was told by the family they were going to paint the engine and tune up but didn't. Has rust in the lower passenger side see the pics, I planned to replace those panels and respray the bottom white and it would blend well due to still having the chrome trim. I have the original 15" factory wheels, had the 17" American Racing Torque Thrusts on hand so put them just to make it look decent while parked with the other projects. Located in Buckeye near the Dollar General 10920 S Tuthill Rd regional delivery available. Price Drop 9/3/23 $5995

Chevy GMC Silverado C10 C20 squarebody c30 classic truck 69-72 Blazer Tahoe Yukon l hot rod rat rod lowrider shop truck patina race car street rod swap meet

[Wikid61]

https://phoenix.craigslist.org/wvl/c...685804470.html Original Tucson truck. 307 2bbl, TH350 with B&M floor shift. 5 lug disk brake swap in front, power steering and brakes. Seat and visors reupholstered and cab seals replaced including vent windows, all door rubber, etc. Runs, drives, steers, stops, everything works. Clean AZ title in my name.


Truck is in Tucson, can bring to Dino's 11/10-11.


Related: c10 c-10 c/10 chevy chevrolet gmc 1967 1968 1969 1971 1972 CST cheyenne custom 67 68 69 70 71 72 k5 k-5 k/5 k10 k/10 k-10 k20 k-20 k/20 2wd ls

[Wikid61]

https://seattle.craigslist.org/see/c...685583212.html Great base to start the custom C10 project you've always wanted.. Solid with a couple spots of rust on the drivers side floor (see pics). The bed has rust but no rust out. Manual transmission and the engine is a straight 6 that turns over so get it running and run that until you're ready to drop in a V8. Comes with title and keys. Rolls and steers easily for loading up.

The parts that are shown as missing are included with the truck. Comes with the grille and radiator, a tilt steering column and an extra parts dash. Interior door panels are included along with some small parts and pieces.

Must sell, I need the space back. Clean and clear title in hand. No trades, email me your phone number and I'll contact you to weed out the email scammers.

GMC C15 C25 C20 Chevrolet hot rod

[Wikid61]

https://sacramento.craigslist.org/ct...685297077.html I have restored C10 Truck with 350 Chevy engine and up dated enterior, new paint on streight body, new steering colume, and bench uphostery, new LED lights through out and bunch of other new parts as the whole truck has been gone through and updated. Very reliable and can be daily driven. Registered and pink in hand. Serious inquires only. call Ash for more details, 9one6-six00-four9one9. Not in a rush to sell don't need help selling .
do NOT contact me with unsolicited services or offers

[71CHEVYSHORTBED402]

The body looks to be in good condition. If so, $1200 is nothing.

https://www.facebook.com/marketplace...2111112l%22%7D

[71CHEVYSHORTBED402]

The body looks to be in good condition. If so, $1200 is nothing.

https://www.facebook.com/marketplace...2111112l%22%7D

[Wikid61]

https://houston.craigslist.org/cto/d...686520819.html 1972 K5 Blazer 4x4 V8 Auto White - $42,500 (Houston)

[HO455]

A big red one in perfect condition. $75000. Not mine. I like the body color fuel cap.

https://vancouver.craigslist.org/rds...688993177.html

Sweet 1968 Chevrolet K20 4 wheel drive with just under 15,000 miles. Excellent collector pickup.

This is a Fleetside big back window, with the original factory 327 V8. Absolutely laser straight body and trim, all in excellent shape with original sheet metal. Never any rust or even close to it. Mint, gorgeous time capsule with 1 high quality repaint.

Original interior, seat has no rips, tears, original rubber floor is in great shape. The 327 v8 4bbl is unrestored and runs excellent. Has the limited slip rear axle, original hubcaps, 1971 original GM working am/fm radio added, white bumpers replaced with chrome. One drive and you will love how it runs with this low of mileage.

Truck speaks for itself, hard to find the 4x4's that aren't beat and well used. Current collector plates.

Come take a look, Located in Langley BC, 25 minutes from the US border, can help ship. $75k CDN obo