What did you do to your truck today.The 3rd chapter - Page 134 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**EdwardSams** · 05-27-2023, 08:51 PM

Went in for an inspection, rolled out with an oil change, recharged air conditioning, and topped off fluids.

KQQL IT · 05-27-2023, 10:52 PM

Fresh layer of penetrol.

ghackett1 · 05-28-2023, 05:59 AM

Took driver side door apart and installed new glass and track, lubed up channels and coated bottom inside of door with POR15. Also added correct spacers to window crank and door handle. Window and door operate as they should now.

**Jiggers72-GMC** · 05-30-2023, 07:05 AM

Mark, it looks like your starter is too far away from the flex plate, if you have a starter shim in there, take it out ........ replace the Bendix as well .

72c20customcamper · 05-30-2023, 07:39 AM

Quote:

Originally Posted by Jiggers72-GMC

Mark, it looks like your starter is too far away from the flex plate, if you have a starter shim in there, take it out ........ replace the Bendix as well .

No shim ,it’s a Powermaster had a good gab when I installed it a few years ago . Think the damage was before my ownership and it got worse over time . I should have inspected the flex plate more thoroughly.

**guyryan100** · 05-30-2023, 07:43 PM

I removed the bed wood to refinish it. My bed wood planks are Birch wood. I finished them many moons ago with polyurethane, that has not held up well. I plan on stripping that off and using an oil instead of a surface coating. I also replace the sending unit because the fuel level float floated away on the last one. I used a plastic float instead of the brass one this time around.

OregonNed · 06-01-2023, 03:55 PM

Gearing up for a 4/5 drop and disc brake conversion up front this month -

ghackett1 · 06-01-2023, 05:43 PM

Installed new CCP rear sway bar on the 68.

LNP · 06-01-2023, 06:05 PM

I hooked my trailer up and helped my son move from one storage place to another

**zicc1835** · 06-01-2023, 07:16 PM

Quote:

Originally Posted by ghackett1

Installed new CCP rear sway bar on the 68.

pictures......

ghackett1 · 06-02-2023, 08:10 AM

Quote:

Originally Posted by zicc1835

pictures......

Here’s some pics of the new CCP rear sway bar installed yesterday.

ghackett1 · 06-02-2023, 08:14 AM

https://www.67-72chevytrucks.com/vbo...1&d=1685707942

Here’s pics of the front sway bar installed on my 68 C10 last weekend. I used an original C10 bar with CCP mounting brackets and poly bushings.

D.B · 06-02-2023, 09:08 PM

Quote:

Originally Posted by ghackett1

Here’s some pics of the new CCP rear sway bar installed yesterday.

Nice install, what diameter is the rear bar??

**MikeB** · 06-02-2023, 10:22 PM

Quote:

Originally Posted by ghackett1

Here’s some pics of the new CCP rear sway bar installed yesterday.

I installed a rear bar many years ago on a long bed truck that already had a front bar. The rear bar really made a difference in steering response and how flat the truck stays in corners. I mean, we're not talking Camaro, but it was a major improvement!

**zicc1835** · 06-01-2023, 07:14 PM

Quote:

Originally Posted by oregonned

gearing up for a 4/5 drop and disc brake conversion up front this month -

nice

**zicc1835** · 06-02-2023, 08:58 AM

Nice thanks for posting my front is done and need to do the back have what I need just haven’t got there yet but this is a motivator

ghackett1 · 06-02-2023, 10:51 AM

Quote:

Originally Posted by zicc1835

Nice thanks for posting my front is done and need to do the back have what I need just haven’t got there yet but this is a motivator

Yep, understand. Just so you know for the rear bar I installed you will need to drill (6) holes (at least for a 67-72 c10). Good luck👍

72c20customcamper · 06-02-2023, 11:48 AM

Rear bearings and shoes

**71CHEVYSHORTBED402** · 06-03-2023, 12:14 AM

Threw this together today, it's been a long time coming. The outer has been wall decor the last 7 years. Inner was shot, sanded, shot again and a clear coat, needless to say it's much heavier now. Took longer than I thought of course, nylon clips have to be sanded just right. Anyway, we install it tomorrow. Edit, installed. My assistant, really vise versa

, he's body and paint guy dropped these off today. Tires due "in a month", bumpers due "call back in two weeks", and upholstery & flooring is supposed to call, someday. Other than that done.

72c20customcamper · 06-03-2023, 11:21 AM

Grill came out great .

All of the bearings and 2 of the races came today just waiting on the outer races and grease seals . At least there are no Chinese parts going on the truck . USA and Japan

wrangler94 · 06-03-2023, 03:13 PM

Nothing actually done to the truck, because it's 30 miles away at my dad's shop for now, but parts boxes are arriving

New master cylinder, soft brake lines, wheel cylinders, brake parts for all the drums, new period correct carburetor has arrived, the rebuilt one that was on it was a pre 68.
Still waiting on the shipment from Cliff's High Performance for the throttle shaft bushing kit and rebuild kit to make the carb as perfect as I can make it. Pic just because

72c20customcamper · 06-03-2023, 04:45 PM

Uhh oh

I wasn’t happy with the color of the passenger fender and the cowl , I didn’t understand why it was darker than the rest of the truck . When I painted the ammo box a few weeks ago I figured out why . I inadvertently had grabbed the wrong paint I used the 68 Golden anniversary paint . Both cans were open and I just saw gold on the outside . Was a stupid mistake .

**MikeB** · 06-03-2023, 09:59 PM

Quote:

Originally Posted by 72c20customcamper

I inadvertently had grabbed the wrong paint I used the 68 Golden anniversary paint .

Probably my all-time favorite truck color!

My dad had a gold 67 Impala 2dr hardtop with gold vinyl interior. Probably a different gold, but it was super cool!

72c20customcamper · 06-04-2023, 09:04 AM

Quote:

Originally Posted by MikeB

Probably my all-time favorite truck color!

My dad had a gold 67 Impala 2dr hardtop with gold vinyl interior. Probably a different gold, but it was super cool!

The saddle fawn poly that’s on my stepper is a little lighter and has more metallic than the anniversary gold .

Casper42 · 06-04-2023, 12:51 PM

Attended the C10 Truck Show in Enumclaw, WA. 200+ C/K-10's from all around the PNW. Found my "taller twin". The red/white '72 took best 67-72. I'm pretty certain this truck has every conceivable option and all items are original, though not factory on this truck.

05-27-2023, 08:51 PM	#1
EdwardSams Senior Member Join Date: Aug 2018 Location: Long Island, NY Posts: 234	Re: What did you do to your truck today.The 3rd chapter Went in for an inspection, rolled out with an oil change, recharged air conditioning, and topped off fluids. Attached Images

05-27-2023, 10:52 PM	#2
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,185	Re: What did you do to your truck today.The 3rd chapter Fresh layer of penetrol. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

05-28-2023, 05:59 AM	#3
ghackett1 68 C10 Longbed Join Date: Sep 2006 Location: Naples, Florida Posts: 520	Re: What did you do to your truck today.The 3rd chapter Took driver side door apart and installed new glass and track, lubed up channels and coated bottom inside of door with POR15. Also added correct spacers to window crank and door handle. Window and door operate as they should now.

05-30-2023, 07:05 AM	#4
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 542	Re: What did you do to your truck today.The 3rd chapter Mark, it looks like your starter is too far away from the flex plate, if you have a starter shim in there, take it out ........ replace the Bendix as well . __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual

05-30-2023, 07:43 PM	#6
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 469	Re: What did you do to your truck today.The 3rd chapter I removed the bed wood to refinish it. My bed wood planks are Birch wood. I finished them many moons ago with polyurethane, that has not held up well. I plan on stripping that off and using an oil instead of a surface coating. I also replace the sending unit because the fuel level float floated away on the last one. I used a plastic float instead of the brass one this time around. Attached Images

06-01-2023, 03:55 PM	#7
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter Gearing up for a 4/5 drop and disc brake conversion up front this month - Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

06-01-2023, 05:43 PM	#8
ghackett1 68 C10 Longbed Join Date: Sep 2006 Location: Naples, Florida Posts: 520	Re: What did you do to your truck today.The 3rd chapter Installed new CCP rear sway bar on the 68.

06-01-2023, 06:05 PM	#9
LNP Registered User Join Date: Mar 2014 Location: Pekin, Illinois Posts: 360	Re: What did you do to your truck today.The 3rd chapter I hooked my trailer up and helped my son move from one storage place to another Attached Images __________________ Harley 1969 Chevy C-10 Long Bed, 350cid, 700R4

06-02-2023, 08:14 AM	#12
ghackett1 68 C10 Longbed Join Date: Sep 2006 Location: Naples, Florida Posts: 520	Re: What did you do to your truck today.The 3rd chapter https://www.67-72chevytrucks.com/vbo...1&d=1685707942 Here’s pics of the front sway bar installed on my 68 C10 last weekend. I used an original C10 bar with CCP mounting brackets and poly bushings. Attached Images

06-02-2023, 08:58 AM	#16
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,147	Re: What did you do to your truck today.The 3rd chapter Nice thanks for posting my front is done and need to do the back have what I need just haven’t got there yet but this is a motivator __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

06-02-2023, 11:48 AM	#18
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,318	Re: What did you do to your truck today.The 3rd chapter Rear bearings and shoes Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

06-03-2023, 12:14 AM	#19
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,188	Re: What did you do to your truck today.The 3rd chapter Threw this together today, it's been a long time coming. The outer has been wall decor the last 7 years. Inner was shot, sanded, shot again and a clear coat, needless to say it's much heavier now. Took longer than I thought of course, nylon clips have to be sanded just right. Anyway, we install it tomorrow. Edit, installed. My assistant, really vise versa, he's body and paint guy dropped these off today. Tires due "in a month", bumpers due "call back in two weeks", and upholstery & flooring is supposed to call, someday. Other than that done. Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 06-03-2023 at 06:38 PM.

06-03-2023, 11:21 AM	#20
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,318	Re: What did you do to your truck today.The 3rd chapter Grill came out great . All of the bearings and 2 of the races came today just waiting on the outer races and grease seals . At least there are no Chinese parts going on the truck . USA and Japan Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

06-03-2023, 03:13 PM	#21
wrangler94 Registered User Join Date: Jul 2008 Location: Washington, NC Posts: 90	Re: What did you do to your truck today.The 3rd chapter Nothing actually done to the truck, because it's 30 miles away at my dad's shop for now, but parts boxes are arriving New master cylinder, soft brake lines, wheel cylinders, brake parts for all the drums, new period correct carburetor has arrived, the rebuilt one that was on it was a pre 68. Still waiting on the shipment from Cliff's High Performance for the throttle shaft bushing kit and rebuild kit to make the carb as perfect as I can make it. Pic just because Attached Images Last edited by wrangler94; 06-03-2023 at 03:18 PM.

06-03-2023, 04:45 PM	#22
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,318	Re: What did you do to your truck today.The 3rd chapter Uhh oh I wasn’t happy with the color of the passenger fender and the cowl , I didn’t understand why it was darker than the rest of the truck . When I painted the ammo box a few weeks ago I figured out why . I inadvertently had grabbed the wrong paint I used the 68 Golden anniversary paint . Both cans were open and I just saw gold on the outside . Was a stupid mistake . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.



Register or Log In To remove these advertisements.

06-04-2023, 12:51 PM	#25
Casper42 Registered User Join Date: Nov 2022 Location: Seattle, WA Posts: 312	Re: What did you do to your truck today.The 3rd chapter Attended the C10 Truck Show in Enumclaw, WA. 200+ C/K-10's from all around the PNW. Found my "taller twin". The red/white '72 took best 67-72. I'm pretty certain this truck has every conceivable option and all items are original, though not factory on this truck. Attached Images __________________ '72 C10 Cheyenne SWB North Carolina truck for 50 years, 72k original miles, Medium/Hawaiian Blue, 3 owners - one for 40 years, garaged kept, original: sheetmetal, undercarriage, moldings, glass * * * New - engine rebuild at 65k in 2015, one repaint in 2010, new front bumper, houndstooth seat, carpet, 8 inch rally wheels on 275-60R-15, LED lighting. - Semper Paratus!

Register or Log In To remove these advertisements.