How about some pics of 67-72 Part II

[marty21221]

Always been a Chevy PU man since I drove my employers 73 C10 Cheyenne Super. I had an 86 that I got tired of fudging the emissions on so I bought a 71C20. Turned into a rust bucket and would have cost me 15K to repair but still has life in it so I gave it to my son who is in the process of working on it. I decided to buy a new to me 72 C20 with the package I wanted.
SBC, auto tran, HD suspension, dual saddle tanks and setup for towing. I bought it out of S. California so it is just about free of rust.
I have had it painted and installed a TH400 w/GV OD although I am having problems getting the GV running due to an electrical problem. I replaced the dash wiring harness and modified the wiring to run the TH400 as it org had a TH350. Added a tonneau cover and am going to put a 383 stroker in it that is on the engine stand by next spring.

[10drum]

Geezer#99 sent me the link to upload photos to replies. This is my 69 C-10 Custom, 307, auto, no air. I purchased it from the original owners grandson, his father bought it 1989 form his father-in-law and painted it 1990. All original except the paint, it was two ton maroon and white when new. 43K miles. I plan to use it to haul my 69 Triumph Daytona to shows. I would like to thank geezer#99, mechanicman, captianfab, and all of the other folks who helped me get it running better.

[Lees68GMC]

Here's some of our trucks over at the Hidden Hot Rod Shop.

The First truck pictured is Pats 67. Tim just finished a 5.3, 4L60E, aluminum radiator, gas tank relocation, suspension, exhaust, disc brakes, on and on. It's a Survivor-Mod.

These other 3 trucks of the 4 pictured have Vortec 5.3s except Tim's other truck in the fore-ground, it's still got the original straight six.

Supposedly there's onna be 6 of us at Friday's last Zeke's Cruise in of the season. I
'll take some pictures to post

[Texasbigblock]

Some really nice trucks here! Here's my big block shorty.

[OregonNed]

I went to a fun little NW Cruise with a few friends yesterday. It was fun to get out and drive! Here are a few I took of the truck.

[ultrahd4me]

Here is my 70 GMC just finished, or almost finished anyway.

[N2TRUX]

Originally Posted by ultrahd4me

Here is my 70 GMC just finished, or almost finished anyway.

Beautiful truck. You have any more pics from the front?

[ultrahd4me]

Here you go. Thanks

[magwakeenercew2jh]

Originally Posted by ultrahd4me

Here you go. Thanks

Hope you don't mind:



If you do, let me know and I'll pull the pic.
Such a great pic, I just wanted to clean up around the truck for a "poster shot".

[ultrahd4me]

Not at all. Looks killer

[Overseas travel]

My 1970 K20

[ole dollor]

Originally Posted by Overseas travel

My 1970 K20

Attachment 1304877

very nice truck you have there....and welcome to the forum from Texas.

[slowcpe]

Originally Posted by ultrahd4me

Here is my 70 GMC just finished, or almost finished anyway.

Very nice. Those Ridlers are perfect for that truck. 20/22s?

edit: I see in another thread they are not Ridlers. Similar but I like yours better.

[ultrahd4me]

They are Rev Classic 106 wheels. Yes 22x9 & 20x8.5. I think they're the perfect offset for a stepper, but would need a rear spacer for a fleetside bed.
Thanks

[blackhooter]

Shot of my 71' Stepside. New wheels/tires and drop kit, exhaust going in this weekend.

[ole dollor]

Originally Posted by blackhooter

Shot of my 71' Stepside. New wheels/tires and drop kit, exhaust going in this weekend.

very nice short stepper . looking good, and welcome to the forum from Texas.

[Billy Bob]

Here is my Family photo.

[Billy Bob]

My 69. It came with these 24" wheels. I need to replace them with some rally wheels as soon as I can find some.

[Ochre Ogre]

I'm new to the forum, I picked this up about a month ago. It had supposedly been sitting in a carport for 20 years. It had rock hard bias-ply tires and a few other assorted issues but basically a solid truck. I had to get new tires just to drive it so I figured might as well get Torque Thrust Ds while I was at it.

Tim

[G-Force]

Here is my 67 C-10 school district flatbed !

[ole dollor]

Originally Posted by Billy Bob

Here is my Family photo.

you my friend have some mighty nice rides....and welcome to the forum from Texas. lots of good people here.

[ole dollor]

Originally Posted by Ochre Ogre

I'm new to the forum, I picked this up about a month ago. It had supposedly been sitting in a carport for 20 years. It had rock hard bias-ply tires and a few other assorted issues but basically a solid truck. I had to get new tires just to drive it so I figured might as well get Torque Thrust Ds while I was at it.

Tim

Very nice truck. and welcome to the best truck forum on the internet from Texas.

[Billy Bob]

Originally Posted by ole dollor

you my friend have some mighty nice rides....and welcome to the forum from Texas. lots of good people here.

Thanks, Old Dollar,
I'm enjoying the site very much.

[N2TRUX]

Originally Posted by ultrahd4me

Here you go. Thanks

Originally Posted by magwakeenercew2jh

Hope you don't mind:


If you do, let me know and I'll pull the pic.
Such a great pic, I just wanted to clean up around the truck for a "poster shot".

Thanks to both of you. That edited pic will be on my Instagram feed very soon.

[ultrahd4me]

Thanks!!! I'm looking forward to seeing it.