Project 7deuce - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy88 · 03-26-2012, 11:40 AM

Just checked in again, I like how you cut out the inside piece of your bed to fix dent on the outside of bed, your build is coming together nice.

Madd Doc · 04-08-2012, 06:51 PM

Nice looking project and I noticed we are nearly neighbors.

My build thread
http://67-72chevytrucks.com/vboard/s...14#post5273714

“I would rather spend 2 hours making a part than $2.00 buying one”

FRENCHBLUE72 · 04-08-2012, 08:01 PM

Been working on my truck but nothing picture worthy...

FRENCHBLUE72 · 07-15-2012, 10:32 AM

Back from the dead.... I finally got the fuel tank installed I raised it almost 2 inches so I cannot be seen from behind the truck. I really think it takes away from the look of a nice truck when you see a big tank hanging below the roll pan.. I used silver on top of the tank to match the air tank and semi satin black on the bottom so it would help the tank disappear... I also shot a coat of semi satin black on the frame rails and the multi color rails were bugging me.. All the bolts are new and replaced with stainless where the load is not great other wise they are grade 5 and 8.. I finally got around to getting the new trailing arm bushings pressed in along with a my new carrier bearing.. The trailing arm bushings I did myself and were a pain in the ass I paid a shop to install the carrier bearing never again will I go back they were retards... I also got my wiring ran back to the rear of the truck and they are all tidied up in made for you clamps and some sweet mesh type loom and it pretty sweet.. Ill try to get the rest of the build updated but please keep in mind that some of the pics my be out of order...

**Hart_Rod** · 07-15-2012, 10:34 AM

Looks great Frenchy!!!

FRENCHBLUE72 · 07-15-2012, 10:34 AM

Fuel line hooked up to the filter still waiting on the rest of my clamps and wire cover material..

FRENCHBLUE72 · 07-15-2012, 10:37 AM

Thanks rob I am hoping my new press and dimple dies show up on monday so that I can box in the trailing arms and punch in some holes... Also have my watts link from fays2 on order... There is a car show coming up in 2 weeks and id like to get it there..

FRENCHBLUE72 · 07-15-2012, 10:55 AM

New battery mount I made to hang the battery off the passenger side frame rail below the bed... This holds a dimple died battery box I bought from grunion customs long ago..

aussie67c10 · 08-17-2012, 10:10 PM

Hey bud i red through your hole post , looks killer i like your work

slammed427 · 08-17-2012, 10:49 PM

Did you make Hot August Nights?
Posted via Mobile Device

**nlped** · 08-26-2012, 12:42 PM

Just read all 14 pages. This long box is going to be one great ride when finished. Love the attention to detail! Now get back to work

FRENCHBLUE72 · 08-26-2012, 01:16 PM

Quote:

Originally Posted by aussie67c10

Hey bud i red through your hole post , looks killer i like your work

Thanks for the comments this thread is far from updated Ill have to work on that..

Quote:

Originally Posted by slammed427

Did you make Hot August Nights?
Posted via Mobile Device

I did not make hot august nights I ended up going to fordyce creek and wheeling at sierra trk it was awesome maybe next year for h.a.n.

Quote:

Originally Posted by nlped

Just read all 14 pages. This long box is going to be one great ride when finished. Love the attention to detail! Now get back to work

Thanks for the words man and I am back to work on it just getting parts cleand and ready to install..

**fakerwade** · 08-27-2012, 01:45 AM

Nice work on the fuel tank,,,look'in good! I really like that fuel filter, I've been running one on my V8 Cherokee for seven years now with no problem (haven't even had to change the filter yet).

VA72C10 · 09-16-2012, 02:36 PM

Looking good! Nice build....time to change the sig for 2013

Posted via Mobile Device

FRENCHBLUE72 · 09-16-2012, 06:29 PM

Quote:

Originally Posted by VA72C10

Looking good! Nice build....time to change the sig for 2013

Posted via Mobile Device

Hey johnathan I think you mean 2031 hahhahhahahaa

FRENCHBLUE72 · 11-02-2012, 09:04 AM

Back at it guys....... Tons of pics to post hopefully they will be in a somewhat correct order..

FRENCHBLUE72 · 11-02-2012, 09:20 AM

Here's a few pics of the curly maple I got from work.. Its hand picked and its super wide which is hard to find.. I plan on running stainless runners and just sealing the wood with clean to let the grain shine.. The wood is super cool looking with grain running the length of the board and also across the board..

**oldman3** · 11-02-2012, 09:44 AM

Is it in a ruff cut stage now? If so, are you going to plane it or leave in ruff....Jim

FRENCHBLUE72 · 11-02-2012, 09:47 AM

When those picures were taken it was in rough cut form.. It has since been ran through a time saver sander at work and squared up... Its beautiful wood for sure.

FRENCHBLUE72 · 11-02-2012, 09:56 AM

Looks like I deleted all of my pics? Ill get some time this weekend and go back over what has been done...

es67chevy · 11-02-2012, 10:21 AM

Quote:

Originally Posted by FRENCHBLUE72

Here's a few pics of the curly maple I got from work.. Its hand picked and its super wide which is hard to find.. I plan on running stainless runners and just sealing the wood with clean to let the grain shine.. The wood is super cool looking with grain running the length of the board and also across the board..

Looks awesome! can't wait to see it in the bed

truckzilla · 11-02-2012, 11:58 AM

That bed wood is going to be so sweet looking! Like a giant guitar!

longbed67 · 11-03-2012, 07:29 PM

Very Nice, Tiger Maple/ Curly Maple is a very beautiful wood!

FRENCHBLUE72 · 11-04-2012, 12:15 PM

Thanks guys I hope it works with the blue and silver theme I have going..

**kev2809** · 11-04-2012, 03:06 PM

where are you getting the wood strips from?

03-26-2012, 11:40 AM	#326
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Re: Project 7deuce Just checked in again, I like how you cut out the inside piece of your bed to fix dent on the outside of bed, your build is coming together nice. __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

04-08-2012, 06:51 PM	#327
Madd Doc Registered User Join Date: Mar 2012 Location: Vail AZ. Posts: 104	Re: Project 7deuce Nice looking project and I noticed we are nearly neighbors. My build thread http://67-72chevytrucks.com/vboard/s...14#post5273714 “I would rather spend 2 hours making a part than $2.00 buying one”

04-08-2012, 08:01 PM	#328
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Been working on my truck but nothing picture worthy... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2012, 10:32 AM	#329
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Back from the dead.... I finally got the fuel tank installed I raised it almost 2 inches so I cannot be seen from behind the truck. I really think it takes away from the look of a nice truck when you see a big tank hanging below the roll pan.. I used silver on top of the tank to match the air tank and semi satin black on the bottom so it would help the tank disappear... I also shot a coat of semi satin black on the frame rails and the multi color rails were bugging me.. All the bolts are new and replaced with stainless where the load is not great other wise they are grade 5 and 8.. I finally got around to getting the new trailing arm bushings pressed in along with a my new carrier bearing.. The trailing arm bushings I did myself and were a pain in the ass I paid a shop to install the carrier bearing never again will I go back they were retards... I also got my wiring ran back to the rear of the truck and they are all tidied up in made for you clamps and some sweet mesh type loom and it pretty sweet.. Ill try to get the rest of the build updated but please keep in mind that some of the pics my be out of order... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2012, 10:34 AM	#330
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: Project 7deuce Looks great Frenchy!!! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-15-2012, 10:34 AM	#331
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Fuel line hooked up to the filter still waiting on the rest of my clamps and wire cover material.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2012, 10:37 AM	#332
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Thanks rob I am hoping my new press and dimple dies show up on monday so that I can box in the trailing arms and punch in some holes... Also have my watts link from fays2 on order... There is a car show coming up in 2 weeks and id like to get it there.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2012, 10:55 AM	#333
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce New battery mount I made to hang the battery off the passenger side frame rail below the bed... This holds a dimple died battery box I bought from grunion customs long ago.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-17-2012, 10:10 PM	#334
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: Project 7deuce Hey bud i red through your hole post , looks killer i like your work __________________ BOWTIE OR NO-TIE

08-17-2012, 10:49 PM	#335
slammed427 Registered User Join Date: Dec 2008 Location: Tempe, Az Posts: 325	Re: Project 7deuce Did you make Hot August Nights? Posted via Mobile Device __________________ 74 C10 LWB 350/T5 Dropped on 20's Soon to be Bagged and Injected 84 C35 Crew Cab Dually. 454/400 Dropped a lot. Instagram: mmmdropp

08-26-2012, 12:42 PM	#336
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Project 7deuce Just read all 14 pages. This long box is going to be one great ride when finished. Love the attention to detail! Now get back to work __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-27-2012, 01:45 AM	#338
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: Project 7deuce Nice work on the fuel tank,,,look'in good! I really like that fuel filter, I've been running one on my V8 Cherokee for seven years now with no problem (haven't even had to change the filter yet). __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

09-16-2012, 02:36 PM	#339
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project 7deuce Looking good! Nice build....time to change the sig for 2013 Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-02-2012, 09:04 AM	#341
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Back at it guys....... Tons of pics to post hopefully they will be in a somewhat correct order.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-02-2012, 09:20 AM	#342
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Here's a few pics of the curly maple I got from work.. Its hand picked and its super wide which is hard to find.. I plan on running stainless runners and just sealing the wood with clean to let the grain shine.. The wood is super cool looking with grain running the length of the board and also across the board.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

11-02-2012, 09:44 AM	#343
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Project 7deuce Is it in a ruff cut stage now? If so, are you going to plane it or leave in ruff....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> Last edited by oldman3; 11-02-2012 at 09:57 AM.

11-02-2012, 09:47 AM	#344
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce When those picures were taken it was in rough cut form.. It has since been ran through a time saver sander at work and squared up... Its beautiful wood for sure. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-02-2012, 09:56 AM	#345
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Looks like I deleted all of my pics? Ill get some time this weekend and go back over what has been done... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-02-2012, 11:58 AM	#347
truckzilla Registered User Join Date: May 2011 Location: Fort Worth, Texas Posts: 468	Re: Project 7deuce That bed wood is going to be so sweet looking! Like a giant guitar!

11-03-2012, 07:29 PM	#348
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project 7deuce Very Nice, Tiger Maple/ Curly Maple is a very beautiful wood! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

11-04-2012, 12:15 PM	#349
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Thanks guys I hope it works with the blue and silver theme I have going.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-04-2012, 03:06 PM	#350
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 7deuce where are you getting the wood strips from? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Register or Log In To remove these advertisements.