![]() |
![]() |
#326 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Thank you!
Got a new present today. My temp guage has been working on-and-off lately (more off than on) so I did some checking this last weekend to see why it wasn't working correctly. I found out that I needed to replace the ignition switch in my truck so I went down to Desert Muscle Cars where they have a great selection of parts for our old trucks. Found the switch and low and behold!!! I found a repop '67 ignition switch chrome bezel. They had just gotten them in. I had asked about the bezel awhile back and they said "nope, can't help ya. One year only part." I am finding out that alot of stuff on my stepper is one year only. That can be a bummer at times... I feel like it's Christmas!!! Mine is in really bad shape and I have been looking to replace it. I will post pics tomorrow, I had forgotten my camera today. Later, D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 03-17-2009 at 12:47 AM. |
![]() |
![]() |
![]() |
#327 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,257
|
Re: '67 step-side replacement rear bumper
Desert Muscle Cars is a good outfit. The guy gave me my money back on a re-pop cigar lighter assembly that burned up after I hooked it up. Don's Hot Rod Shop is right down the street, also friendly and knowledgeable.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 03-17-2009 at 04:46 AM. |
![]() |
![]() |
![]() |
#328 | |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Quote:
D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
|
![]() |
![]() |
![]() |
#329 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Picked up some new headlight, windshield wiper and choke knobs today! About time too, mine were rather bad looking.
![]() D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#330 |
Under Construction
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
|
Re: '67 step-side replacement rear bumper
Picture Slacker!!!!!
__________________
Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 |
![]() |
![]() |
![]() |
#331 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
I know I have been bad. I will post some new pics soon.
D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#332 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Ok, here are the pics of the new knobs and ignition bezel. Small things I know, but they really clean up a cab!
D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#333 |
the pollock
Join Date: May 2008
Location: abilene, texas
Posts: 4,423
|
Re: '67 step-side replacement rear bumper
Sweet teh whole build is worth lookign at .. good lookin truck dude
__________________
Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042 |
![]() |
![]() |
![]() |
#334 | |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Quote:
After MUCH debate, I decided to go see if George's engine can be fired. He has a very nicely rebuilt 350 that should scream... but time will tell. I posted pics of it earlier in this thread. If we cannot get his to fire, I am going to rebuild my 305. The transmission is going to B&K transmissions soon. They are going to put in a stage 2 shift kit, so that should help beef up the shift points. I'll keep you posted. D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
|
![]() |
![]() |
![]() |
#335 |
Under Construction
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
|
Re: '67 step-side replacement rear bumper
shift kits....... me likey......
__________________
Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 |
![]() |
![]() |
![]() |
#336 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Sorry for the delay in updating my thread. The engine is rebuilt and I have a new tranny. I am editing photos tonight so I will post those soon.
Until then, a quick sum-up; my 700r4 was trash and I ended up completely rebuilding my 305... don't ask, I will explain what happened asap. For what it's worth, she is running fantastic and was well worth the time and $$$ invested. Pics and story comming soon... very soon. ![]() D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 10-19-2009 at 12:23 AM. |
![]() |
![]() |
![]() |
#337 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
The plan was this. I really wanted a 350 but could only afford a new transmission OR a new motor, but I needed both. I had to settle with rebuilding my 700R4 and putting new gaskets in my 305 hoping it would hold until I saved up enough for a nice 350.
Took the motor and transmission out and couldn't believe the amount of oil my motor had been puking over the past few months. YUCK! I hate grease, I can't imagane why anyone would want to me a mechanic for a living. I only do it because I can't afford to have someone else do my work... ![]() I got a lead on a lightly used Goodwrench rebuilt 1990 4L60 transmission for 300 bucks. I bought it and took it over to the tranny shop for a reseal and to change it from the electronic speed-o to a manual one. (200 bucks) I found out something interesting about my old transmission. I couldn't have rebuilt it if I had wanted too. Several gears were chewed up and tons of score marks in the casing. Good thing I got the lead on the "new" one. But back to the motor. I started tearing it down to discover that the cylinder walls were in pretty good shape. I already had the gasket kit (90 bucks) so I figured why not hone the walls and put new bearings (60 bucks for rod and main bearings) and rings (60 bucks) in... sounds good right? Took the caps off and discovered that the bearings were trashed. Figured I was that far and had the crank machined 10 over (75 bucks) and had a friend come over to help with honing the block. I also discovered that my timing chain was in bad shape so I got a new one of those... (25 bucks...are you getting the idea???) At this point I bought a new oil pump (30 bucks) so at least the bottom end would be complete. And what of the heads? I took them over to a mechanic friend to have new seals pressed in. No such luck... the guides were shot. I remembered an employee at Checker Auto Parts had a set of rebuilt heads for a 305 and only wanted 100 bucks for them so I grabbed 'em. The story continues...
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 07-24-2009 at 10:59 PM. |
![]() |
![]() |
![]() |
#338 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
After I got the heads I realized that in the end I will end up with a rebuilt 305, so I went ahead and got a mild RV cam (95 bucks) and installed it. I finished off with a new edlebrock intake (140 bucks) and water pump (25 bucks)... Total cost? About 1500 for the motor and transmission rebuild with all the trimmings, I.E. new spark plug wires, spark plugs, oil... transmission fluid.... etc. I guess that's not so bad, but unfortunately It's still a 305. I tell people now that I have a 350 with dyslexia or I have a weight-watchers edition 350.
What a mess. Total time? 3 weeks including waiting on the machine shop. Day arived for the start up. Fired it up and James came over to help. We throttled it for a bit for the cam break in and about 10 minutes into the process, BAM! tack, tack, tack, tack, tack... He still feels really bad about that because he was the one at the throttle at the time... Not anyone's fault, but do you think I'm going to let him off the hook easy or anytime soon? Naaaaaahhhhhhh.... ![]() ARRRUUGGGHHHH! LOL One of the rockers wasn't bolted down tight enough and it caught on the stud. It took a chunk out of the stud and bent the rod. Needless to say I had to extract a stud out of my old set of heads and install it on the new set. That was not fun and I'll save it for another story. Outside of thinking my engine was overheating at first, (but come to find out it was the temp guage that was bad), she runs fantastic. Plenty of power and seems to get better mileage than before. D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 07-24-2009 at 11:04 PM. |
![]() |
![]() |
![]() |
#339 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Oh and my radiator took a crap during the break in so I had to replace that as well... Took the 2 core one out and replaced it with a V8 4 core. Helps to keep the temps down and I got my oil pressure guage working. Nice to know I actually can keep an eye on my oil pressure now.
![]() D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#340 |
Luv the Crewcabs
Join Date: Aug 2006
Location: Andrews, In. 46702
Posts: 4,097
|
Re: '67 step-side replacement rear bumper
Glad to hear all worked out well, The $$ amount is Pretty Good considering what you got out of your investment.
Rick
__________________
55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde |
![]() |
![]() |
![]() |
#341 | |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Quote:
D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
|
![]() |
![]() |
![]() |
#342 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Got my new temp gauge today from Desert Muscle cars. Cost me 40 bucks and installed it. That was the problem, my truck reads accurate temps now.
Phew... I'm not overheating like I thought I have been. ![]() ![]() D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 08-10-2009 at 10:09 PM. |
![]() |
![]() |
![]() |
#343 |
Registered User
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
|
Re: '67 step-side replacement rear bumper
nice, got to hate it wwhen you want to do one thing and then you just get that bug and do the rest, but glad to hear that it is coming along nicely. and 305's can be a good engine.
__________________
James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587 |
![]() |
![]() |
![]() |
#344 | |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Quote:
She has plenty of power for street driving. Most of the power is lost in the transmission. I want to get a stage 2 shift kit installed. I wanted to when I put the transmission in, but I just ran out of money. I am sure once the shift kit is installed, the power will get transfered to the rear wheels more effectively. I seem to be getting around 13-15 MPG and for that I cannot complain. She is doing much better on gas than before. D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
|
![]() |
![]() |
![]() |
#345 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
OK. A new dawn has approached with my truck. I have decided that I like my truck enough that IF I can find a nice, rust-free AZ '67 cab, I will redo the truck.
Here is the plan. After I aquire a "new" cab, strip her down and have the top chopped a couple or so inches (3"-4"???). I love the way chopped '67's look with the step-sides and I have a good friend of mine who chops tops for a living and who is also VERY good at doing so. He can also cut the glass so I don't have to find someone else who can do that! ![]() As I am working on the cab I will get all new sheet-metal for the rest of the truck, IE, fenders, doors, hood... I need to get rid of all the rusted, bent-up pieces from Oregon. I will get the pieces one at a time and when I have all the pieces I need, jamb everything in and then assemble the truck and paint all at once. I am sure it will take some time to get the other pieces, but at least a piece at a time will be more affordable. I have also decided that I will weld the tailgate into the bed. My gate now is bolted closed and I have never needed to lower the tailgate. I figure it will look cleaner that way. I am looking for a cab now and I am sure with all of the '67's here in Tucson I can find a good cab. I am in no big hurry, so I won't just jump on a POS cab just to get one. I have one of those already! ![]() Also, no way in heck I am changing the color. It will stay pearl orange. It's kinda become my calling card. Wish me luck! D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 09-29-2009 at 11:36 PM. |
![]() |
![]() |
![]() |
#346 |
the pollock
Join Date: May 2008
Location: abilene, texas
Posts: 4,423
|
Re: '67 step-side replacement rear bumper
good luck!
__________________
Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042 |
![]() |
![]() |
![]() |
#347 |
Under Construction
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
|
Re: '67 step-side replacement rear bumper
sounds like a plan!
__________________
Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 |
![]() |
![]() |
![]() |
#348 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
I figured that I should do something new to my truck so I can post it and keep it on the front page of the build section.
![]() I remade my kick panels and got my door speakers installed. ![]() Till later! D EDIT:Um, until I can figure out why I can't post pics, they will have to wait. ![]()
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#349 |
mini truck racer
Join Date: Aug 2006
Location: Baytown , texas
Posts: 3,010
|
Re: '67 step-side replacement rear bumper
Just got caught up on this . Glad it all worked out and i had a planetary gear fail on a Z71 i had . Must be common .
__________________
1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583 |
![]() |
![]() |
![]() |
#350 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Looks like I can post pics again.
![]() Here are a couple of the new kick panels and the "Tangerine Dream" lettering on my glove box. Let me know what you think! D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
Bookmarks |
|
|