KS Labor Day 67-72 parts special!!!!!!!! - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FMJ_Blazer · 11-19-2011, 07:34 PM

Do you have heater core brackets, hardware, and the seals that go between core pipes and box holes? Also, e brake assembly needed.
Posted via Mobile Device

**zicc1835** · 11-21-2011, 09:44 PM

Thanks Randy
Just let me know by pm when you post pics here no rush
Jess
Posted via Mobile Device

teeitup · 11-21-2011, 09:49 PM

here ya go Jess

**zicc1835** · 11-22-2011, 09:04 PM

that works for me Paypal sent have a Happy Thanksgiving

Quote:

Originally Posted by teeitup

here ya go Jess

**zicc1835** · 12-01-2011, 11:05 PM

Randy received package today thanks
jess

Quote:

Originally Posted by teeitup

here ya go Jess

teeitup · 12-27-2011, 08:46 PM

THANK You Jess, Happy Holidays, Randy

teeitup · 12-27-2011, 08:48 PM

Pics for Duane
1) its been painted black
2) its black but aftermarket
3) real black one
4) real black but cardboard is wavy, has some tape that needs cleaned off
5) blue one

tanman722001 · 11-21-2011, 11:01 PM

Hi Randy,What do you get out of a wiper switch?And also for kick what do you sell auto trns cross members and a steering column non tilt for a auto too?

teeitup · 11-21-2011, 11:05 PM

Tony,
Wiper switches are $7 shipped
AT crossmembers are $45 shipped
AT columns are $60 shipped, I always recommend to buyer to install new bearing in these, just to be safe and its easier to do while they are out
Thanks Randy

tanman722001 · 11-21-2011, 11:08 PM

Hi how much more would it be to add it to my interior light?

teeitup · 11-21-2011, 11:09 PM

I'll get one put in there for you

tanman722001 · 11-21-2011, 11:11 PM

Thanks alot Randy mine just went out on me today.What do i owe you and i will get it out tomorrow or wed

tanman722001 · 11-22-2011, 12:20 AM

Thats alot Randy your the man.LOL

tanman722001 · 11-22-2011, 05:28 AM

What GMC glove boxes do you have?What are you getting for arm rest (ones for the metal door panel)

El Campo · 11-23-2011, 10:46 AM

Do you happen to have tailgate latches? I actually only need one, I believe it is the passenger side.
Posted via Mobile Device

brickren · 11-24-2011, 08:58 AM

Hello. I have a 1968 K20.
1. Left inner and outer fender.
2. Core support.
3. Heater control w/o ac
4. Front engine compartment harness
5. Front parking brake cable (hand brake).
6. Rear parking brake cables 44inches long for '68 4wd.
7. Wiper motor.
Shipped to Meadville,Pa. 16335 Thanks for your time. Brian

teeitup · 11-24-2011, 11:02 AM

HI Brian, unfortunately I don't have any of that stuff right now, if I get any in I will contact you. Thanks Randy

teeitup · 12-27-2011, 08:56 PM

Pics for Bobby

teeitup · 12-27-2011, 08:57 PM

moooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo

teeitup · 12-28-2011, 10:02 AM

67 chevy heaven, sorry I don't ship doors

Joseph, I don't have right now sorry

Bobby, this stuff you said your wanting is yours. I'll check my dash pads. Headliner has been sold to Duane, sorry. I think I only have good pass arm rests but will look. No gate letters. I'll get that burb here this Sun and get some pics for you

Duane, I think you could take the cover off and put it on another piece of fiber board. No trim, it all breaks. I'll find a piece of board for shipping. Happy New Year to you too!!!!!

Donnell67, are you needing 4 core of 3 core

Thanks Randy

teeitup · 12-28-2011, 10:03 AM

w4625, I'll look tonight, Thanks Randy

teeitup · 12-29-2011, 01:57 PM

w4625, here is the best tray setup I have, a little rust in corner $15 plus ship

teeitup · 11-24-2011, 11:03 AM

El Campo, I have the hinges but not the latches that mount in tailgate. Thanks Randy

teeitup · 11-24-2011, 11:04 AM

Tony, headed out to shop in a bit, I'll look for arm reast. Thanks Randy

67 chevy heaven · 12-28-2011, 01:01 AM

what about a good drivers side door
I am looking for one with no rust on the bottom,
69-72 if possible

11-19-2011, 07:34 PM	#1
FMJ_Blazer Registered User Join Date: Nov 2010 Location: Cumming, GA Posts: 26	Re: Labor Day 67-72 parts special!!!!!!!! Do you have heater core brackets, hardware, and the seals that go between core pipes and box holes? Also, e brake assembly needed. Posted via Mobile Device

11-21-2011, 09:44 PM	#2
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,250	Re: Labor Day 67-72 parts special!!!!!!!! Thanks Randy Just let me know by pm when you post pics here no rush Jess Posted via Mobile Device __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

11-21-2011, 09:49 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! here ya go Jess Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-27-2011, 08:46 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! THANK You Jess, Happy Holidays, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-27-2011, 08:48 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Pics for Duane 1) its been painted black 2) its black but aftermarket 3) real black one 4) real black but cardboard is wavy, has some tape that needs cleaned off 5) blue one Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-21-2011, 11:01 PM	#8
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Labor Day 67-72 parts special!!!!!!!! Hi Randy,What do you get out of a wiper switch?And also for kick what do you sell auto trns cross members and a steering column non tilt for a auto too? __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-21-2011, 11:05 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Tony, Wiper switches are $7 shipped AT crossmembers are $45 shipped AT columns are $60 shipped, I always recommend to buyer to install new bearing in these, just to be safe and its easier to do while they are out Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-21-2011, 11:08 PM	#10
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Labor Day 67-72 parts special!!!!!!!! Hi how much more would it be to add it to my interior light? __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-21-2011, 11:09 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! I'll get one put in there for you __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-21-2011, 11:11 PM	#12
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Labor Day 67-72 parts special!!!!!!!! Thanks alot Randy mine just went out on me today.What do i owe you and i will get it out tomorrow or wed __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-22-2011, 12:20 AM	#13
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Labor Day 67-72 parts special!!!!!!!! Thats alot Randy your the man.LOL __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-22-2011, 05:28 AM	#14
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Labor Day 67-72 parts special!!!!!!!! What GMC glove boxes do you have?What are you getting for arm rest (ones for the metal door panel) __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-23-2011, 10:46 AM	#15
El Campo Registered User Join Date: Jul 2011 Location: El Campo, Tx Posts: 1,246	Re: Labor Day 67-72 parts special!!!!!!!! Do you happen to have tailgate latches? I actually only need one, I believe it is the passenger side. Posted via Mobile Device __________________ 72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!!

11-24-2011, 08:58 AM	#16
brickren Registered User Join Date: Nov 2011 Location: Saegertown,Pa. Posts: 28	Re: Labor Day 67-72 parts special!!!!!!!! Hello. I have a 1968 K20. 1. Left inner and outer fender. 2. Core support. 3. Heater control w/o ac 4. Front engine compartment harness 5. Front parking brake cable (hand brake). 6. Rear parking brake cables 44inches long for '68 4wd. 7. Wiper motor. Shipped to Meadville,Pa. 16335 Thanks for your time. Brian __________________ 1968 K 20 w/327 4bbl 4 sp

11-24-2011, 11:02 AM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! HI Brian, unfortunately I don't have any of that stuff right now, if I get any in I will contact you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

12-27-2011, 08:56 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Pics for Bobby Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-27-2011, 08:57 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! moooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-28-2011, 10:02 AM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 67 chevy heaven, sorry I don't ship doors Joseph, I don't have right now sorry Bobby, this stuff you said your wanting is yours. I'll check my dash pads. Headliner has been sold to Duane, sorry. I think I only have good pass arm rests but will look. No gate letters. I'll get that burb here this Sun and get some pics for you Duane, I think you could take the cover off and put it on another piece of fiber board. No trim, it all breaks. I'll find a piece of board for shipping. Happy New Year to you too!!!!! Donnell67, are you needing 4 core of 3 core Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-28-2011, 10:03 AM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! w4625, I'll look tonight, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-29-2011, 01:57 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! w4625, here is the best tray setup I have, a little rust in corner $15 plus ship Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-24-2011, 11:03 AM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! El Campo, I have the hinges but not the latches that mount in tailgate. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-24-2011, 11:04 AM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Tony, headed out to shop in a bit, I'll look for arm reast. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-28-2011, 01:01 AM	#25
67 chevy heaven Registered User Join Date: Jul 2009 Location: york, SC Posts: 223	Re: Labor Day 67-72 parts special!!!!!!!! what about a good drivers side door I am looking for one with no rust on the bottom, 69-72 if possible

Register or Log In To remove these advertisements.