![]() |
![]() |
#326 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
I got the last piece of the steering column finished tonight. A friend had borrowed the column cover to get his paint matched to it so I didn't have it when I was working on the other column parts. I wanted to shorten it to match the three inches I took out of the column, but keep all of the factory stamping details. It would have been easier to just chop the end under the dash off, but what's the fun in that?
![]() Marking the ends with masking tape. ![]() The mounting holes are exactly three inches center-to-center so I decided that I'd remove the section between the holes. ![]() There's not quite three inches from the end that would be cut off to the indention, so I didn't shorten the cover quite three inches. ![]() Beginning to cut the center out. ![]() Center removed, and the end section slid forward and tacked into place. ![]() Fully welded and ground down. ![]() ![]() And mounted back on the column. ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#327 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Got the steering column parts bead blasted and the tube painted. Tomorrow I'm going to finish cleaning the inside of the bed with CLR and 0000 steel wool. I want to go ahead and get the bed buffed out, undercoated, and the floor in so it'll be ready to go back on the frame. LS2 blocks may as well be unicorns around here so I'll pick up a cheap 5.3 off craigslist to get the motor mounts and T56 crossmember sorted out.
Feels good to finally get to work on the truck, I've been wrenching on the VW the last two months in my spare time! The turnsignal switch housing was bent so I straightened it out and double checked the fit before blasting everything. ![]() ![]() Primed/guidecoated, wetsanded, and painted. ![]() ![]() ![]() ![]() I've also started polishing out the side trim using Wenol metal polish to take the haze of the original anodizing, then waxing it. All the original trim is in unbelievably good condition, I won't have to replace any of it! ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#328 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
nice work astronaut, hey you posted about glass beads on my what to use thread, are there different grades/grains of the glass beads?
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#329 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
Posted via Mobile Device
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
![]() |
![]() |
![]() |
#330 | |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
|
![]() |
![]() |
![]() |
#331 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
More baby steps, got the column parts primed with DP90 and then a few coats of K36 high build. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
![]() |
![]() |
![]() |
#332 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Picked up a cheap 5.3 for mock up duties today. Next on the list is a scattershield so I can get the motor/trans mounts built and finish the frame bracing.
![]() Posted via Mobile Device
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#333 |
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Been watchin for awhile. Man you have some nice progress. Keeps me motivated.
Subscribed. |
![]() |
![]() |
![]() |
#334 |
Senior Member
![]() Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
amazing detail... each and every part, the smallest thing, all the hardware... amazing. i think that if you ever cut a corner you wouldn't be able to sleep. you'd get up and go out to make it right.
keep it going, we'll be here... |
![]() |
![]() |
![]() |
#335 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
The details on this thing are nuts/... Keep up the good work I check back here all the time for ideas..
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#336 | ||
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
Quote:
Thanks, glad you like it! Hoping to get back on the frame as soon as I can pick up a scattershield!
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
||
![]() |
![]() |
![]() |
#337 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Bought a new lens for the gauges, it came in today. I wetsanded and buffed the lettering off and sent it to Jason at Greenback Decal. Instead of printing the 160 mph speedo graphics on a clear decal we are going to reprint the whole thing straight on the lens. This way the color will match and there's no chance of getting air bubbles under the decal. He said the tach should be finished soon and he'll have the lens in a couple days so he can work on it. Can't wait to see the gauges finished, I think it's going to be one of my favorite parts of the truck!
I forgot to take a finished after pic but buffing the lens is much clearer now. ![]() ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#338 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
I can't wait see it either.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#339 |
Senior Member
![]() Join Date: Mar 2011
Location: Tucson, Arizona
Posts: 2,071
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
I'm looking forward to seeing it too. We've talked about this before and you've beat me to the punch on having one done. I'm just looking for a color change. I didn't think about just polishing off the graphics on a new lens. I have been thinking about getting a piece of polycarbonite cut and then printed on.
|
![]() |
![]() |
![]() |
#340 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
![]() |
![]() |
![]() |
#341 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
What color silver did you use on the gauge cluster trim.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#342 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Sorry for the late response, I just found the can. It's SparVar S120 Silver.
Posted via Mobile Device
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#343 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Santa came early this year! It's just like I wanted and even has the lip around the edge to put the original style shift pointers on it!
![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#344 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
That looks good. Who did the work on the gauge(s)?
__________________
Karl ![]() 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
![]() |
![]() |
![]() |
#345 |
Registered User
Join Date: May 2011
Location: Fort Worth, Texas
Posts: 468
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Coolness abounds here!
![]() Keep it up! |
![]() |
![]() |
![]() |
#346 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Jason Wilson at Greenback Decal made the tach and is reprinting the speedo lens.
http://parklane410.wix.com/home Thanks!
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#347 |
Registered User
Join Date: May 2007
Location: Frisco, TX
Posts: 80
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
can you post some pics of the whole truck?
|
![]() |
![]() |
![]() |
#348 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
The truck is completely apart (and was when i bought it) but I had posted pics of everything when I first bought the truck and posted it all here. All those pics on the first page are gone though; I'll work on getting them uploaded to photobucket and put them back up.
Posted via Mobile Device
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#349 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Here's a few quick ones til I get the first page fixed.
![]() ![]() ![]() ![]() ![]() ![]() About the only rust it has. ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#350 |
Registered User
Join Date: May 2011
Location: Fort Worth, Texas
Posts: 468
|
![]()
Wow! I'm blown away at how straight that truck is! It must have been garaged its whole life and hardly used. I can't believe how little rust it has!
Talk about finding a gem! |
![]() |
![]() |
![]() |
Bookmarks |
|
|