![]() |
|
![]() |
#1 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
First picture I had already cut out the old rockers prior to media blasting so I could see what was behind everything
|
![]() |
![]() |
![]() |
#2 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
next step figuring out where to cut and fitting the lower front door brace with the LMC Truck patch panels
|
![]() |
![]() |
![]() |
#3 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Next step cleaning off the inner rocker panel brace from the cab mount and fitting the inner rocker / floor patch panel also from LMC Truck
|
![]() |
![]() |
![]() |
#4 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
I chose to leave the rear 10 inches or so of my factory rocker since it was in excellent shape and I like to save all the original metal I can ! I also like to cut a panel where it leaves my weld on a bend to keep it cleaner (in my opinion) after trimming your patch panel lay it over the original panel and mark it off to give you an exact pattern to cut out.
Those clamps are the $8 ones from Harbor Freight and I must say I cant believe I haven't had a set until now, they are Awesome ! |
![]() |
![]() |
![]() |
#5 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Next panel the lower side kick panel. I did have to modify this panel slightly to get it to line up like I liked, and once i get it welded in solid i will be using a step bit to align all the bolt holes exactly.
|
![]() |
![]() |
![]() |
#6 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
That is all at the moment, more to come. I did the drivers side New Years Day and it took me 6 1/2 hours , this side has gone much faster once you figure out what your doing it goes pretty quick. The Harbor Freight clamps give you the perfect welding gap and once it is ground down you have a nice flat butt panel connection, i will post some finished pictures on Monday.
Once again thank you LMC Truck for your support ! |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Nice work Mike. Making it look easy!
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#8 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Thanks man, its really not that bad. I have actually been really enjoying it !
|
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,557
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Nice repairs Mike...Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Apr 2007
Location: dequincy la.
Posts: 1,465
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Liken' this.....that kind of work is like meditation for me...."frustration" for some....and a good example of why you dont "HAVE TO" use entire patch just because it came that way ....it's not so much original metal as it is the original "FIT"....... and your right .....a little planning ahead and you can minimize the weld pattern that is seen........jim
__________________
Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791 |
![]() |
![]() |
![]() |
#11 | |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Thank you !
Quote:
|
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jul 2006
Location: the netherlands europe
Posts: 4,335
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
there spotweld drill bits available for when you want to save the metal behind the rusted piece
![]() it only cuts the top metal leaving enough fles on the bottom one to weld the new piece on it takes a little practice to know how deep to drill but other than that there nice tools to have talking bout tools but not related to sheetmetal ...... i seen this today : ![]() https://www.youtube.com/watch?v=MyZEaPQinO0 its expensive but so is a gas rig and its a lot safer too you could basicly do this near a gasleak and nothing would happen unlike when using an open flame , as long as you dont damage the coil it will keep going too ans not run out of gas
__________________
i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 01-03-2015 at 03:23 PM. |
![]() |
![]() |
![]() |
#13 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Huh you made it look like a 15 min episode the slosh tubz channel.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! Last edited by duallyjams; 01-03-2015 at 07:10 PM. |
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
nice work man... you got it going on.
got a few pass-side fenders to look at. and the wing to return... lets hook up this week, if not tomorrow. |
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() Join Date: Dec 2012
Location: Allen, TX
Posts: 519
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
In post #327--how did you know where the factory spot welds were? I doesn't look like they were still visible on the surface.
__________________
JK |
![]() |
![]() |
![]() |
#16 | |
Registered User
Join Date: Jul 2006
Location: the netherlands europe
Posts: 4,335
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
when the material is blasted you just see them it might be the lighting doesnt make the dimples show up or they whent a little thick on the primer usually there pretty clear te see
__________________
i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts |
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Mar 2011
Location: Kansas City, Missouri
Posts: 3,541
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Metal work is looking great Mike.
__________________
Scott |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Mar 2013
Location: Grand Island, Ne.
Posts: 1,110
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Very nice progress Mike! Keep it up. I'm hopefully gonna get started on my cab soon.
__________________
J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523 |
![]() |
![]() |
![]() |
#19 | |||||
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
Quote:
Quote:
Quote:
thanks man ! Quote:
Go Big Daddy ! |
|||||
![]() |
![]() |
![]() |
#20 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Ok well here is the second set of pics.
Metal finished the floor welds. Welded in the LMC Truck side kick panel bottoms bolted the outer bottom of the LMC Truck A pillar back on and welded it in
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=554172 Last edited by 67cheby; 01-05-2015 at 10:45 AM. |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Dec 2014
Location: New Paltz
Posts: 14
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Nice build man! I'm following you in Instagram. That sheet metal work is top notch!
|
![]() |
![]() |
![]() |
#22 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Thanks man, I am learning !
|
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Dec 2014
Location: New Paltz
Posts: 14
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
|
![]() |
![]() |
![]() |
#24 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Next up fitting the LMC TRUCK replacement rocker panels.
First since I used the rear of the stock rocker and I wanted to get an exact fit, I cut the rocker a 1/2 inch or so long. Then Layed the rocker over the existing rocker and marked it for an exact cut Cut the rocker and now it is ready for final weld in |
![]() |
![]() |
![]() |
#25 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Next up the front part of the High hump sent all the way from Germany from my friend Patrick Koch , Thank you Patrick !
First step drilling holes around the edge to plug weld Marking the holes on the cab side Grinding off the epoxy so the weld will take Weld it in and smooth off the welds ! |
![]() |
![]() |
![]() |
Bookmarks |
|
|