finally come - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pimpston65** · 05-19-2018, 05:33 PM

found a pair a great doors in iowa. $200 for the pair!!! no holes cut or body filler.

awbrown · 03-11-2019, 09:30 PM

Quote:

Originally Posted by pimpston65

found a pair a great doors in iowa. $200 for the pair!!! no holes cut or body filler.

Next time you drive that far , find me a pair of 63 doors and I will help pay for the trip !!!!

**aerotruk63** · 05-19-2018, 09:12 PM

I could do Iowa on the way to Montana.

**pimpston65** · 05-19-2018, 10:09 PM

Quote:

Originally Posted by aerotruk63

I could do Iowa on the way to Montana.

i should have made a better statement. i already picked them up, were leaving back to michigan in the am.

Bomp · 05-20-2018, 05:14 PM

Great score on the doors, sorry the glass didn't make it.
Nothing will stop you on this Epic build.

**pimpston65** · 05-20-2018, 05:18 PM

Quote:

Originally Posted by Bomp

Great score on the doors, sorry the glass didn't make it.
Nothing will stop you on this Epic build.

thanks for the encouragement. all the metal parts minus the cab and frame should be done at the blasters soon, then the fun begins!!!

LT1 Burb · 06-09-2018, 10:05 AM

I didn't go back through all the pages but did you ever contact GM Canada and get the documentation on your truck, it will tell exactly how many were built, engine number, options etc. This is the one they sent for my car I bought in Canada.

**pimpston65** · 06-09-2018, 10:10 AM

Quote:

Originally Posted by LT1 Burb

I didn't go back through all the pages but did you ever contact GM Canada and get the documentation on your truck, it will tell exactly how many were built, engine number, options etc. This is the one they sent for my car I bought in Canada.

push button radio? not a two knober?

**pimpston65** · 01-18-2019, 07:37 PM

found this heater hose

Johns 66 · 02-24-2019, 03:03 PM

Looking Good Winston!!!!

**pimpston65** · 02-24-2019, 04:10 PM

Quote:

Originally Posted by Johns 66

Looking Good Winston!!!!

thank you sir, hope this year to have them both on the road.

**pimpston65** · 02-25-2019, 07:19 PM

pulled from a burb i been picking for 2yrs didnt even noticed till i saw them after i pulled mostly everything,but i have them and they will be put to use.

**pimpston65** · 03-10-2019, 03:56 AM

Got the floor out. Now fitting the new and grafting some old parts to make it fit as original.

Johns 66 · 03-10-2019, 09:44 AM

Winston this is gonna look so really good once you are done with her.

**pimpston65** · 03-10-2019, 11:33 AM

Quote:

Originally Posted by Johns 66

Winston this is gonna look so really good once you are done with her.

I have a few old parts coming to patch where it’s need. As always the pieces I need aren’t repop!!!

Bomp · 03-10-2019, 08:26 PM

Quote:

Originally Posted by pimpston65

I have a few old parts coming to patch where it’s need. As always the pieces I need aren’t repop!!!

Totally understand on making pieces that they don't repop. No pieces ever made for a 5" stretched cab either.

Curious on the upholstery..... Been kicking around some ideas on what to do when I get behind my machine to knock out Steiners seat.
On the edge of my seat to see what you're planning.

**pimpston65** · 03-10-2019, 10:20 PM

Quote:

Originally Posted by Bomp

Totally understand on making pieces that they don't repop. No pieces ever made for a 5" stretched cab either.

Curious on the upholstery..... Been kicking around some ideas on what to do when I get behind my machine to knock out Steiners seat.
On the edge of my seat to see what you're planning.

just factory look on all 3 rows

**60-66** · 05-19-2019, 10:59 AM

LePimp , your message box is full , tried to pm back.

**pimpston65** · 05-24-2019, 04:31 AM

Quote:

Originally Posted by 60-66

LePimp , your message box is full , tried to pm back.

sorry its been crazy, i made space for your pm

**pimpston65** · 06-18-2019, 03:29 PM

found the headpipe, just need the tailpipe.

67see10 · 10-15-2019, 10:04 PM

How hard was it to convert your suburban to the tailgate doors?

Your PM's are full btw

wahl4m · 10-16-2019, 09:03 AM

pimpston - just take it to a muffler shop & have a exact copy made !!!!!!!!!! it is a no brainer -once pipe is rusty or new it should look like a nos original ??

**chtr65** · 10-16-2019, 09:24 AM

Pimpston65 your mail box is full. PM coming

**pimpston65** · 10-16-2019, 09:45 AM

Quote:

Originally Posted by chtr65

Pimpston65 your mail box is full. PM coming

I’m going through a breakup with my girlfriend of 6 years so I haven’t able to think about anything at the moment. What’s up

**chtr65** · 10-16-2019, 10:03 AM

I was wondering if you had chance to look for locking hubs for 4x4. No hurry. Take care of things at home first. Thanks, Mike

05-19-2018, 05:33 PM	#1
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,193	Re: finally come found a pair a great doors in iowa. $200 for the pair!!! no holes cut or body filler. Attached Images

05-19-2018, 09:12 PM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: finally come I could do Iowa on the way to Montana. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

05-20-2018, 05:14 PM	#5
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: finally come Great score on the doors, sorry the glass didn't make it. Nothing will stop you on this Epic build.

06-09-2018, 10:05 AM	#7
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: finally come I didn't go back through all the pages but did you ever contact GM Canada and get the documentation on your truck, it will tell exactly how many were built, engine number, options etc. This is the one they sent for my car I bought in Canada. Attached Images

01-18-2019, 07:37 PM	#9
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,193	Re: finally come found this heater hose Attached Images

02-24-2019, 03:03 PM	#10
Johns 66 Registered User Join Date: Apr 2017 Location: Talladega Alabama Posts: 860	Re: finally come Looking Good Winston!!!! __________________ Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4

02-25-2019, 07:19 PM	#12
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,193	Re: finally come pulled from a burb i been picking for 2yrs didnt even noticed till i saw them after i pulled mostly everything,but i have them and they will be put to use. Attached Images

03-10-2019, 03:56 AM	#13
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,193	Re: finally came Got the floor out. Now fitting the new and grafting some old parts to make it fit as original. Attached Images

03-10-2019, 09:44 AM	#14
Johns 66 Registered User Join Date: Apr 2017 Location: Talladega Alabama Posts: 860	Re: finally come Winston this is gonna look so really good once you are done with her. __________________ Former Decorated Combat Marine...Semper Fi!! Instagram jorourke322 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=734699 2019 GMC AT4

05-19-2019, 10:59 AM	#18
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: finally come LePimp , your message box is full , tried to pm back. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

06-18-2019, 03:29 PM	#20
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,193	Re: finally come found the headpipe, just need the tailpipe. Attached Images

10-15-2019, 10:04 PM	#21
67see10 Registered User Join Date: Jul 2017 Location: FL Born, UT Living Posts: 139	Re: finally come How hard was it to convert your suburban to the tailgate doors? Your PM's are full btw

10-16-2019, 09:03 AM	#22
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: finally come pimpston - just take it to a muffler shop & have a exact copy made !!!!!!!!!! it is a no brainer -once pipe is rusty or new it should look like a nos original ??

10-16-2019, 09:24 AM	#23
chtr65 Senior Member Join Date: Mar 2013 Location: Lewisberry, Pa. Posts: 541	Re: finally come Pimpston65 your mail box is full. PM coming

10-16-2019, 10:03 AM	#25
chtr65 Senior Member Join Date: Mar 2013 Location: Lewisberry, Pa. Posts: 541	Re: finally come I was wondering if you had chance to look for locking hubs for 4x4. No hurry. Take care of things at home first. Thanks, Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.