The Blue Goose

[highperf4x4]

Originally Posted by oldblue1968chevy

acrylic enamel huh

what will happen if I dont paint it will it rust? (sorta in a hurry cruise in and looiing at a bed tonite..and dont have time for it to dry only about 2-3 hours..)

I installed my alternator brackets about 45 mins after I painted them.

[oldblue1968chevy]

Hey VA

I need 3 of these 'nuts that clamp on to things' and all 4 screws if ya can find some throw em in the box with U bolts please. thanks

[oldblue1968chevy]

all 4 center caps are there!!! but only like 1 lug nut per wheel i'll just pick some up at the tire place probably,,..are they special or what?

[usmcchevy]

My rims needed a 1" shank type lug, local places wanted about $3 each, he had them for about half that shipped.

[oldblue1968chevy]

hmm well a fellow board member runs a tire shop locally i'll support him and maybe he'd cut me a deal who knows!

[oldblue1968chevy]

cruise in at dunlap tn today (just north of chattanoga). only pics I took (i know lol). there was a nice green burban and a swb black 69-70 and then a blown68 project...then my clunker there was another one but it left as I pulled in (also looked at a bed and didnt take pics, it was a 72 lwb tn orange truck not orig paint, looked pretty good, no rust that I could see he wants 350$ for it no tailgate striaght everything else

the 2 cars to the right are my buddys, and theres a 50's model ford wrecker also gf has pics on her phone of these in better picture 3.2 megapixel camera phone....sorry for bad pics forgot chairs and forgot digital camera it was fun though!!! no problems 2 hr drive

[highperf4x4]

Cool! I like your friends cars too.

That sounds like an awesome price for a good bed!

[Hubscrub]

nice to see ya drivein her, i was near yer town yesterday i think, i got the car out and took it for a run and drove to winchester,up 127 to hillsboro, up and down 41 to manchester,and monteagle and back home the murfessboro cruise in is now started here is some info if you didn't know

2010 Cruise-In Location Information:

Click here for area map.
Where:
The Avenue Murfreesboro
2615 Medical Center Parkway
Murfreesboro Tn. 37129.
When:
Every Friday Night
5pm - 9pm
May 7th - October 1st/ Weather permitting
Event:
2010 Cruise-Ins
The Murfreesboro Hot Rod Club is proud to announce it's weekly Friday Night Cruise-ins for 2010, The Avenue Murfreesboro. The Cruise Ins will be held behind Belk's, 2615 Medical Center Parkway. The Cruise-ins are open to all makes & models. Participants are asked to donate $1 to enter, there is no charge to spectators. All profits, after expenses, go to local charities.

[oldblue1968chevy]

shoulda said something we coulda met up and talked trucks!

Thanks for the info hubscrub ya gonna be going any this summer? Ima try to make it once or twice...there alot of fun is it a pretty good turnout?

[Hubscrub]

Originally Posted by oldblue1968chevy

shoulda said something we coulda met up and talked trucks!

Thanks for the info hubscrub ya gonna be going any this summer? Ima try to make it once or twice...there alot of fun is it a pretty good turnout?

the turnout is usually pretty good there, we might go some this summer

[oldblue1968chevy]

Ok, talked the guy with the bed and 5 lug coil spring rearend down to 75$ then right as I was going to buy it the guy with the lwb late 70's frame with my slotted wheels called hes delering it this evening to me for 200$!!!!

So maybe I can trade the frame (minus wheels) to the guy with the coil spring rearend.. (hes a real horse trader, depending on what gear ratio the leaf spring rearend has I wanna stay 373 gears!!)

Tonite I'll have pics of my wheels a lil more polished up and hopefully this week i'll be getting my new bed, selling my bed to a craigslist guy, and gettin my slots mounted on my tires and my rearend blasted painted refreshed AGAIN

[VA72C10]

cool, sounds like some good deals!

[highperf4x4]

Right on. I'll be looking for the pics!

[oldblue1968chevy]

one of the wheels I really scrubbed. no polishing yet what do I do to get em shiny again (dad says its impossible..?)

thanks!!! I'll get pics of frame in a lil im back outside had to check the truck forum first

[oldblue1968chevy]

I CANT WAIT TO GET THESE SHINY AND MOUNTED!!

Heres my frame ima put it on craigslist CHEAP! and hopefully I dont have to scrap it (hate to scrap a good disc frontend lol). Otherwise its going to scrapmetal yard then to china on a barge....

[oldblue1968chevy]

one more from diff. ange! dad dont like em I do hopefully i dont change my mind..

edit, I love my truck

[highperf4x4]

http://67-72chevytrucks.com/vboard/s...d.php?t=372115

[oldblue1968chevy]

the ol chevy had to put up with a bunch of fords at last weekends cruise in..

heres a pic of the cars/trucks at the restaraunt in DUNLAP TN. Wish I took better pics...

Got all 4 of my wheels polished what a pita..may go back sometime and repolish em all (not perfect but decent for driving, not shows).

Now I gotta get me a 5 lug rearend and a bedside and im complete once again!

[oldblue1968chevy]

heres a before polish and after polish pic

[VA72C10]

Nice job on the rims.....look good from VA

[OARNGESI]

The wheels look great why not just use the 5lug rearend you already have just a little welding

[oldblue1968chevy]

I was,,but it was too much trouble I have no knowledge of stuff like that and there was a rearend across the street for the same price I sold my whole frame hopefully I have new pics for yall.

I sold the 78 frame yesterday for 75$ but sold the bumper and 4 tires for 40$

thanks on the wheels ima do em all again sometime..there better than they were

[threeonthetree]

Trucks looking good. Rims are cooooool.

[matchstick]

I've got a new white rear bumper you can have if you want it. I can leave it in Smithville with my parents if you want to go there and pick it up.

[oldblue1968chevy]

May take ya up on it but leme play with my dented bumper and see what I can do..

yeah thanks threeonthetree! you need some slots too!