What did you do to your truck today part III - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pimpston65** · 01-08-2015, 03:47 PM

"Free Grizz". hey if you need a ash tray front shot me a PM and its yours. free of course and shippings on me!!!

Grizz1963 · 01-08-2015, 03:55 PM

Quote:

Originally Posted by pimpston65

"Free Grizz". hey if you need a ash tray front shot me a PM and its yours. free of course and shippings on me!!!

Thanks a lot buddy. Happy to pay my way though.

Always happy to pay the post via Paypal.

While we are back to our regular transmission........

As requested by Ta2Don.

I hope it is helpful to some who need a new glovebox.

I have drawn up the outline of a self build/fold glovebox (cubby hole) that can be folded from 0.8mm sheet metal or ally, then riveted or tack welded to keep together. I made one as a trade for some side view mirrors last year.

I trust you guys can understand the measurements and destructions.

If you have various types of air on, fresh air pipes behind the dash, you may need to edit or nip the rear corner to make everything fit.

Shout if you need more info.

Jeff La · 01-08-2015, 09:04 PM

Quote:

Originally Posted by Grizz1963

Thanks a lot buddy. Happy to pay my way though.

Always happy to pay the post via Paypal.

While we are back to our regular transmission........

As requested by Ta2Don.

I hope it is helpful to some who need a new glovebox.

I have drawn up the outline of a self build/fold glovebox (cubby hole) that can be folded from 0.8mm sheet metal or ally, then riveted or tack welded to keep together. I made one as a trade for some side view mirrors last year.

I trust you guys can understand the measurements and destructions.

If you have various types of air on, fresh air pipes behind the dash, you may need to edit or nip the rear corner to make everything fit.

Shout if you need more info.

What's this mm thats after all the numbers

**Micmac** · 01-08-2015, 04:57 PM

Grizz you sir, are a genius. My mind has never quite worked that way. Anyone remember similar drawings on the Army MOS test! I had a hangover when I took the test and it didn't matter how well I folded the boxes, they still made me 11/BangBang.

mjh1965 · 01-08-2015, 04:58 PM

I would like to add that Rian has always helped me . He has not only helped me on my truck but also helped build my carport so I have a place to do the truck in the first place. Yes I also help him but that's what friends are for
I only met him through having the same interest and truck . I have also made other friends through this forum you all know who you are,enough to make me won't to spend my 50th birthday with him and them in The USA At Clems in October as Don said I was always told if you haven't got anything nice to say DONT SAY ANYTHING AT ALL

**Micmac** · 01-08-2015, 09:32 PM

I've only run into one jerk on here since 2007, and he also was an FNG. This is a place where you should be able to post anything about or 60-66 Chevy trucks, or things related to them w/o fear of reprisal. Rian is a CONTRIBUTOR here.

powerdriver 1958 · 01-08-2015, 10:15 PM

19515windowsolow ,

14 posts and you are ready to rule this forum ... Take your foot out of your mouth and step back , Learn what this forum is about or log out before your are banned

Quote:

III. No pissing matches. Its fine to disagree, but once a thread has run its course, and degenerated into little more than an insult fest, it will be locked. While this will require a judgment call by the Administrators & Moderators. The members of this site can keep our moderating to a minimum by exercising a little discretion and self- control. Excessive profanity will lead to a 24 hour suspension at the Administrations discretion.

Quote:

IV. Pure trolling, either to upset someone or simply for your personal
enjoyment, is strictly prohibited. If you're here to cause trouble, it will be a very short stay. Immediate BAN and you will be reported to your ISP.

LVPhotos · 01-08-2015, 10:17 PM

Heading to pickup bag mounts. A before shot and one of first piece in.

schpeen · 01-08-2015, 10:31 PM

Tinted the windows and added the passenger side door mirror.

Lugnutz65 · 01-08-2015, 10:34 PM

Quote:

Originally Posted by schpeen

Tinted the windows and added the passenger side door mirror.

Nice truck! How much is it lowered? Tire and wheel size?

schpeen · 01-09-2015, 04:33 AM

Quote:

Originally Posted by Lugnutz65

Nice truck! How much is it lowered? Tire and wheel size?

P225/70/15
P255/70/15 rears

**jayoldschool** · 01-09-2015, 11:45 AM

x3

Grizz1963 · 01-09-2015, 12:02 PM

Quote:

Originally Posted by jayoldschool

x3

You serious?

Before and after on the white walls?

If so..... WoW!!

I need some of that as my whites are grey.

**pimpston65** · 01-08-2015, 10:55 PM

Quote:

Originally Posted by schpeen

Tinted the windows and added the passenger side door mirror.

how did you get them WW's white cuz i have a set, and they are kinda yellow maybe from storage cuz they never been mounted...

schpeen · 01-09-2015, 04:28 AM

Quote:

Originally Posted by pimpston65

how did you get them WW's white cuz i have a set, and they are kinda yellow maybe from storage cuz they never been mounted...

X2 on the Wesleye

64chevtruck · 01-10-2015, 12:53 AM

Quote:

Originally Posted by schpeen

Tinted the windows and added the passenger side door mirror.

Nice! The tint looks great man, and I love those stock mirror mounts.

**Micmac** · 01-08-2015, 11:32 PM

I use Wesley's Bleach White on my Chiefs Gangsta WWW's. Orange hand cleaner and a scrub brush works as well.

blown240 · 01-09-2015, 01:36 PM

I found my exhaust leak!

**jayoldschool** · 01-09-2015, 07:19 PM

Quote:

Originally Posted by blown240

I found my exhaust leak!

Replace with coppers or Percy's and you'll be good.

65Gregg · 01-10-2015, 11:23 AM

Quote:

Originally Posted by jayoldschool

Replace with coppers or Percy's and you'll be good.

Percy's for the win!

Paul Y · 01-10-2015, 05:24 AM

Quote:

Originally Posted by blown240

I found my exhaust leak!

If you are going to use the Mr Gasket style ones again I had great success by soaking them in water for a few hours and then fitting them. Water makes them swell and then takes up any irregularities in the header when assembled.

Worth a try!

P.

Grizz1963 · 01-10-2015, 05:31 AM

Quote:

Originally Posted by Paul Y

If you are going to use the Mr Gasket style ones again I had great success by soaking them in water for a few hours and then fitting them. Water makes them swell and then takes up any irregularities in the header when assembled.

Worth a try!

P.

Said like a man who knows his nuts from his bolts. Makes huge sense.

See you later.

C20ELEPHANT · 01-10-2015, 08:14 PM

Quote:

Originally Posted by blown240

I found my exhaust leak!

I installed a set of Doug Thorley Tri-Y' on my 82 some 20 years ago and never had a gasket blow out, just snug'em every couple months while changing the oil. The directions for the Doug Thorley's stated: Coat both sides of the header gasket with copper permatex, let dry then install. Those gaskets lasted for 15 years and some 300,000 miles til the motor finally gave out on me...

schpeen · 01-11-2015, 08:27 PM

Quote:

Originally Posted by blown240

I found my exhaust leak!

You can also double them up to make up for imperfect head to header match.

rickoner · 01-11-2015, 11:29 PM

Picked this gem up today. Came out of either a '71 or '72 C20. 292 with p/s! Has a th350 bolted to it. Also got all of the mounts/perches, trans crossmember, and the steering column. I called because I wanted the steering shaft out of the column. haha. I'm going to try to fire it up soon. Don't know if I'm going to use it or flip it. I was originally going to do an lsx but this kinda fell in my lap.

01-08-2015, 03:47 PM	#1
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: What did you do to your truck today part III "Free Grizz". hey if you need a ash tray front shot me a PM and its yours. free of course and shippings on me!!!

01-08-2015, 04:57 PM	#4
Micmac Senior Member Join Date: Nov 2007 Location: Calais, Maine Posts: 512	Re: What did you do to your truck today part III Grizz you sir, are a genius. My mind has never quite worked that way. Anyone remember similar drawings on the Army MOS test! I had a hangover when I took the test and it didn't matter how well I folded the boxes, they still made me 11/BangBang. __________________ 1963 Chevrolet C-10 "Ginger" 1970 C-30 Dump Truck "Scarlet" 2019 Chevy Silverado 2500 Z71 LTZ 1947 Indian Chief Roadmaster with Sidecar. 2012 Indian Chief Serial #002 of 110 built in '12 2016 Indian Chief Roadmaster

01-08-2015, 04:58 PM	#5
mjh1965 Registered User Join Date: Sep 2013 Location: Kent England Posts: 1,025	Re: What did you do to your truck today part III I would like to add that Rian has always helped me . He has not only helped me on my truck but also helped build my carport so I have a place to do the truck in the first place. Yes I also help him but that's what friends are for I only met him through having the same interest and truck . I have also made other friends through this forum you all know who you are,enough to make me won't to spend my 50th birthday with him and them in The USA At Clems in October as Don said I was always told if you haven't got anything nice to say DONT SAY ANYTHING AT ALL __________________ FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614

01-08-2015, 09:32 PM	#6
Micmac Senior Member Join Date: Nov 2007 Location: Calais, Maine Posts: 512	Re: What did you do to your truck today part III I've only run into one jerk on here since 2007, and he also was an FNG. This is a place where you should be able to post anything about or 60-66 Chevy trucks, or things related to them w/o fear of reprisal. Rian is a CONTRIBUTOR here. __________________ 1963 Chevrolet C-10 "Ginger" 1970 C-30 Dump Truck "Scarlet" 2019 Chevy Silverado 2500 Z71 LTZ 1947 Indian Chief Roadmaster with Sidecar. 2012 Indian Chief Serial #002 of 110 built in '12 2016 Indian Chief Roadmaster

01-08-2015, 10:17 PM	#8
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: What did you do to your truck today part III Heading to pickup bag mounts. A before shot and one of first piece in. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-08-2015, 10:31 PM	#9
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: What did you do to your truck today part III Tinted the windows and added the passenger side door mirror. Attached Images

01-09-2015, 11:45 AM	#12
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,169	Re: What did you do to your truck today part III x3

01-08-2015, 11:32 PM	#17
Micmac Senior Member Join Date: Nov 2007 Location: Calais, Maine Posts: 512	Re: What did you do to your truck today part III I use Wesley's Bleach White on my Chiefs Gangsta WWW's. Orange hand cleaner and a scrub brush works as well. __________________ 1963 Chevrolet C-10 "Ginger" 1970 C-30 Dump Truck "Scarlet" 2019 Chevy Silverado 2500 Z71 LTZ 1947 Indian Chief Roadmaster with Sidecar. 2012 Indian Chief Serial #002 of 110 built in '12 2016 Indian Chief Roadmaster

01-09-2015, 01:36 PM	#18
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Re: What did you do to your truck today part III I found my exhaust leak! __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

01-11-2015, 11:29 PM	#25
rickoner Registered User Join Date: Apr 2014 Location: pittsburgh, pa Posts: 258	Re: What did you do to your truck today part III Picked this gem up today. Came out of either a '71 or '72 C20. 292 with p/s! Has a th350 bolted to it. Also got all of the mounts/perches, trans crossmember, and the steering column. I called because I wanted the steering shaft out of the column. haha. I'm going to try to fire it up soon. Don't know if I'm going to use it or flip it. I was originally going to do an lsx but this kinda fell in my lap.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.