Mesquite 1966 C10 - LS3 W/Air Ride - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66-PMD-GMC · 04-17-2012, 05:43 PM

The reason I mentioned it is because the peddles are different.
I ran into this when I went from the V6 to an inline 6 and had to move the bell crank location.
It is pretty simple but I don't have a hydraulic setup so I have no idea what the peddle looks like. As far as I know, they all hang the same way. Since you have upgraded your brakes you will need a new setup anyway.
I will try to get some photos uploaded as soon as I can.

McMurphy · 04-17-2012, 09:53 PM

Mine is set up for mechanical too.
Probably wont help you any if you are going to put in the hydralic.

The yolk under the dash, that your brake pedal and e-brake mount to should already be set up to accept a clutch pedal, just a matter of getting the right hardware for the application you want to use.

I can still post pics of mine if you want them though!

**66ChevyMax** · 04-17-2012, 10:16 PM

I don't think it matter hydro or mech. I just need the pedal and the hardware to mount it. I will make the rest. This is what I have now and I would like to se a pic with a clutch installed.

Thanks

Quote:

Originally Posted by McMurphy

Mine is set up for mechanical too.
Probably wont help you any if you are going to put in the hydralic.

The yolk under the dash, that your brake pedal and e-brake mount to should already be set up to accept a clutch pedal, just a matter of getting the right hardware for the application you want to use.

I can still post pics of mine if you want them though!

Posted via Mobile Device

**66ChevyMax** · 04-17-2012, 10:18 PM

Does any after market company make one. If so I haven't found it.
Posted via Mobile Device

McMurphy · 04-17-2012, 10:48 PM

Ok fresh off the digital camera for you!

When I got mine from a donor rig at the junk yard, I installed it the very next day while I could still remember how. (I have to do things like that because I really am not as smart as people pretend I am...)

Hope these photos help, if you have any questions of course ask, I will answer what I can.
Name: 17apr12 clutch pedal assy (1).jpg
Views: 8795
Size: 61.9 KB

Name: 17apr12 clutch pedal assy (1).jpg
Views: 8795
Size: 61.9 KB

Name: 17apr12 clutch pedal assy (2).jpg
Views: 9729
Size: 56.3 KB

Name: 17apr12 clutch pedal assy (3).jpg
Views: 5215
Size: 59.2 KB

Name: 17apr12 clutch pedal assy (4).jpg
Views: 5453
Size: 55.2 KB

Name: 17apr12 clutch pedal assy (5).jpg
Views: 4455
Size: 45.1 KB

**66ChevyMax** · 04-17-2012, 11:01 PM

Thanks Murph you the man
Posted via Mobile Device

**dean jendro** · 04-18-2012, 08:49 AM

66Chevymax,
I went the opposite direction, from stick to automatic. I still have the clutch side stuff for some reason. If you want it you can have it.
Dean

**66ChevyMax** · 04-18-2012, 09:15 AM

PM Sent

Quote:

Originally Posted by dean jendro

66Chevymax,
I went the opposite direction, from stick to automatic. I still have the clutch side stuff for some reason. If you want it you can have it.
Dean

**dean jendro** · 04-18-2012, 09:56 PM

Craig,

Here's what I have from my old clutch setup. The only thing I couldn't find was the return spring but that is the easy part. I have pictured the whole assembly but I will send you the clutch arm assembly only. You may have to pull the shaft out of your brake arm assembly and clean out the crud from both ends because those 2 plastic bushings pictured on the clutch shaft go in the ends of the brake shaft, then the clutch shaft goes thru the center of the brake shaft. Kinda hard to explain but it will all be clear when you get all the pieces together. If this is what you need I'll ship it to you this week. The complete clutch arm assembly is shown in the last picture. The retainer bracket slips on the knurled end of the shaft and is secured with a bolt and nut. There's a hole in the opposite end of that bracket that secures it to the clutch actuator rod. You can see most of that in McMurphy's photos.

Dean

**66ChevyMax** · 04-18-2012, 10:50 PM

That's perfect Dean i can't thank you enough. Let me know if I can ever help you
Posted via Mobile Device

fattyarbuckle · 07-06-2012, 10:23 AM

any updates?

I feel like I need a fix....lol

**66ChevyMax** · 07-06-2012, 02:12 PM

I have done very little as of late, work is taking most of my time along with summer things like the pool, yard and lake, mostly work

Should be able to get back to the truck in August.

Quote:

Originally Posted by fattyarbuckle

any updates?

I feel like I need a fix....lol

duallyjams · 07-06-2012, 04:14 PM

pool & lake sound like great progress to me ( Md = 100 + temp )

jimmydean · 07-06-2012, 04:22 PM

Still one of my favorite builds.

McMurphy · 07-07-2012, 12:19 AM

I didnt want to be obvious about it, but .... I miss you man.

**66ChevyMax** · 07-07-2012, 05:15 PM

Quote:

Originally Posted by duallyjams

pool & lake sound like great progress to me ( Md = 100 + temp )

The problem is they are far a few between, my big deadline at work will pass on Monday the 16, after that I'm on vacation and life will be back to normal. Trust me I am thankful to be this busy, as I am self employed.

Quote:

Originally Posted by jimmydean

Still one of my favorite builds.

Thanks man, I hope to keep it that way.

Quote:

Originally Posted by McMurphy

I didnt want to be obvious about it, but .... I miss you man.

Same here Murph, I've been checking in now and then, I just haven't posted much.

1enick72 · 07-08-2012, 10:57 AM

Just found this build, very nice work.

Shooters_7 · 07-09-2012, 10:11 PM

The issues your facing and figuring out will help me with my on going build! Great work so far and can't wait to see the finished product! I'm fixing to drop an LY6/4L80 into my 65 SWB BBW once I get the frame back from powder coat.

Dubnova · 08-02-2012, 06:46 PM

Bump...... This is good........
Posted via Mobile Device

66-PMD-GMC · 09-14-2012, 08:48 PM

I am just starting a 63 build for my brother. He wants to go LS motor... If you have any tips it would be great! By the way, just noticed... don't see any of your photos??? Sup wit dat?

**Captainfab** · 09-15-2012, 12:28 AM

Pics work for me.......

66-PMD-GMC · 09-15-2012, 02:41 AM

Quote:

Originally Posted by Captainfab

Pics work for me.......

You can see the pics??? All I see are small boxes with an X in them... is my computer messed up again?? I still need those parts Cap.. waiting on my brother... I will be in touch soon

Love this build

likaroc13 · 09-15-2012, 03:03 AM

Quote:

Originally Posted by 66-PMD-GMC

You can see the pics??? All I see are small boxes with an X in them... is my computer messed up again??

maybe? because I can see them too

jesse1972 · 09-21-2012, 07:24 PM

This build is awesome man, and I like your shop a lot too! Just the kind of build I would like to do someday, gotta sell a 72 Nova first though!

66-PMD-GMC · 09-21-2012, 08:03 PM

Quote:

Originally Posted by likaroc13

maybe? because I can see them too

Had my computer fixed today. Can see the photos now.
I am doing an ls motor in a 63 (frame is the same as 64-66) what motor mounts and header combo did you end up with? I read about clearance issues but do you have numbers for the final setup?
Anyone have any knowledge as to the wires I will need to feed this engine on a 4L80E?

04-17-2012, 05:43 PM	#326
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Mesquite 1966 C10 - LS3 W/Air Ride The reason I mentioned it is because the peddles are different. I ran into this when I went from the V6 to an inline 6 and had to move the bell crank location. It is pretty simple but I don't have a hydraulic setup so I have no idea what the peddle looks like. As far as I know, they all hang the same way. Since you have upgraded your brakes you will need a new setup anyway. I will try to get some photos uploaded as soon as I can. __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

04-17-2012, 09:53 PM	#327
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: Mesquite 1966 C10 - LS3 W/Air Ride Mine is set up for mechanical too. Probably wont help you any if you are going to put in the hydralic. The yolk under the dash, that your brake pedal and e-brake mount to should already be set up to accept a clutch pedal, just a matter of getting the right hardware for the application you want to use. I can still post pics of mine if you want them though! __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

04-17-2012, 10:18 PM	#329
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 - LS3 W/Air Ride Does any after market company make one. If so I haven't found it. Posted via Mobile Device __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

04-17-2012, 10:48 PM	#330
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: Mesquite 1966 C10 - LS3 W/Air Ride Ok fresh off the digital camera for you! When I got mine from a donor rig at the junk yard, I installed it the very next day while I could still remember how. (I have to do things like that because I really am not as smart as people pretend I am...) Hope these photos help, if you have any questions of course ask, I will answer what I can. __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

04-17-2012, 11:01 PM	#331
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 - LS3 W/Air Ride Thanks Murph you the man Posted via Mobile Device __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

04-18-2012, 08:49 AM	#332
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: Mesquite 1966 C10 - LS3 W/Air Ride 66Chevymax, I went the opposite direction, from stick to automatic. I still have the clutch side stuff for some reason. If you want it you can have it. Dean

04-18-2012, 09:56 PM	#334
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: Mesquite 1966 C10 - LS3 W/Air Ride Craig, Here's what I have from my old clutch setup. The only thing I couldn't find was the return spring but that is the easy part. I have pictured the whole assembly but I will send you the clutch arm assembly only. You may have to pull the shaft out of your brake arm assembly and clean out the crud from both ends because those 2 plastic bushings pictured on the clutch shaft go in the ends of the brake shaft, then the clutch shaft goes thru the center of the brake shaft. Kinda hard to explain but it will all be clear when you get all the pieces together. If this is what you need I'll ship it to you this week. The complete clutch arm assembly is shown in the last picture. The retainer bracket slips on the knurled end of the shaft and is secured with a bolt and nut. There's a hole in the opposite end of that bracket that secures it to the clutch actuator rod. You can see most of that in McMurphy's photos. Dean Attached Images Last edited by dean jendro; 04-18-2012 at 10:01 PM.

04-18-2012, 10:50 PM	#335
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 - LS3 W/Air Ride That's perfect Dean i can't thank you enough. Let me know if I can ever help you Posted via Mobile Device __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

07-06-2012, 10:23 AM	#336
fattyarbuckle Registered User Join Date: Nov 2010 Location: St. Louis Mo. Posts: 282	Re: Mesquite 1966 C10 - LS3 W/Air Ride any updates? I feel like I need a fix....lol

07-06-2012, 04:14 PM	#338
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Mesquite 1966 C10 - LS3 W/Air Ride pool & lake sound like great progress to me ( Md = 100 + temp ) __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

07-06-2012, 04:22 PM	#339
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Mesquite 1966 C10 - LS3 W/Air Ride Still one of my favorite builds. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

07-07-2012, 12:19 AM	#340
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: Mesquite 1966 C10 - LS3 W/Air Ride I didnt want to be obvious about it, but .... I miss you man. __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

07-08-2012, 10:57 AM	#342
1enick72 Registered User Join Date: Jun 2010 Location: Jackson, ME Posts: 287	Re: Mesquite 1966 C10 - LS3 W/Air Ride Just found this build, very nice work. __________________ 65 short step edited by staff

07-09-2012, 10:11 PM	#343
Shooters_7 Registered User Join Date: Apr 2011 Location: Great State of Texas Posts: 410	Re: Mesquite 1966 C10 - LS3 W/Air Ride The issues your facing and figuring out will help me with my on going build! Great work so far and can't wait to see the finished product! I'm fixing to drop an LY6/4L80 into my 65 SWB BBW once I get the frame back from powder coat.

08-02-2012, 06:46 PM	#344
Dubnova Registered User Join Date: May 2012 Location: Madison Alabama Posts: 201	Re: Mesquite 1966 C10 - LS3 W/Air Ride Bump...... This is good........ Posted via Mobile Device



Register or Log In To remove these advertisements.

09-14-2012, 08:48 PM	#345
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Mesquite 1966 C10 - LS3 W/Air Ride I am just starting a 63 build for my brother. He wants to go LS motor... If you have any tips it would be great! By the way, just noticed... don't see any of your photos??? Sup wit dat? __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

09-15-2012, 12:28 AM	#346
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Mesquite 1966 C10 - LS3 W/Air Ride Pics work for me....... __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-21-2012, 07:24 PM	#349
jesse1972 Registered User Join Date: Sep 2012 Location: Oceanside Ca Posts: 1	Re: Mesquite 1966 C10 - LS3 W/Air Ride This build is awesome man, and I like your shop a lot too! Just the kind of build I would like to do someday, gotta sell a 72 Nova first though!

Register or Log In To remove these advertisements.