The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-04-2015, 03:51 PM   #326
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Quote:
Originally Posted by oossuuu754 View Post
I completely stripped/sandblasted the parts that I wanted to age. Flat Black Primer then painted them. After it dried for a few days I then sanded the entire part with mixture of coarse, medium and fine grit sanding disk on my orbital to give the pain the weathered look.

To make the rust you first need to completely sand any spot you want to rust to bare metal. Then you mix up a spray bottle with these ingredients.

16 oz Hydrogen Peroxide (fresh bottle un open is best)
2 oz white vinegar
1/2 Tbsp of Salt

lightly spray the bare metal and rust will form almost immediately. Let this dry then repeat. The more time you repeat the process it the darker it will be. You can also use a small propane torch to speed up the drying process.

After the rust has dried for about 24 hours, take fresh small paint brush and gently remove any extremely loose rust pieces. I use leaf blower to blow the loose particles away. Be careful because most of the rust will wipe away at this point.

After you removed the loose particles you need to treat and seal the rust with Pentrol. You can buy this at Lowes or Home Depot in the paint department. This will adhere it surface.

Lastly you should clear the patina with a satin or gloss clear. I am going to do that in about a year.

It is not as difficult as this sounds, but it does take a little time sanding.
Go to post 17 on this thread
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline   Reply With Quote
Old 03-05-2015, 09:17 AM   #327
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Nice... I love the plate! Expecting the ECM to arrive today or tomorrow.
skymangs is offline   Reply With Quote
Old 03-09-2015, 10:20 AM   #328
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

SKYMANGS:
After 6 hours of fruitless engine diagnostics I thought I should actually accomplish something today. So, Cecil's new arm rests and inside visor went in today. These are 55-59 two tone arm rests in Silver and Black. They look right at home here though!
Attached Images
  
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline   Reply With Quote
Old 03-16-2015, 10:12 AM   #329
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Cecil is still trying to be diagnosed for his engine ailment. Until then he did get a few minor details buttoned up. New Visor and a NOS 58/59 GMC day/night mirror.
Attached Images
   
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline   Reply With Quote
Old 03-16-2015, 07:31 PM   #330
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Cool parts. ECM didn't fix the drivability concern?
Advanced Design is offline   Reply With Quote
Old 03-17-2015, 01:40 PM   #331
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Quote:
Originally Posted by Advanced Design View Post
Cool parts. ECM didn't fix the drivability concern?
AD - nope it wasn't the ECM. But the good news is now Cecil's engine is fixed!!!

Chris was determined to get Cecil running so he trailered him 3 hours each way to get diagnostics. I will let him go into details but I am just happy that Cecil lives.

Hopefully we can get a test drive video up sometime today or tomorrow!
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline   Reply With Quote
Old 03-17-2015, 06:06 PM   #332
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Arrrg! Just got off the phone with Chris and I'll be darned if Cecil's transmission is busted. Third gear is shot. On a lighter note Chris did say that it runs like a bat out of hell in first and second gear.
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline   Reply With Quote
Old 03-17-2015, 07:48 PM   #333
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Hate to hear about the tranny, but glad the engine is going good...Jim
oldman3 is offline   Reply With Quote
Old 03-17-2015, 08:31 PM   #334
T Hilde
Registered User
 
Join Date: Apr 2009
Location: Faribault, MN
Posts: 385
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Darn, what's that old saying "if it weren't for bad luck, I'd have no luck at all"

Pretty soon all the bugs will be out and you'll be cruising with a $h!t eating grin.
T Hilde is offline   Reply With Quote
Old 03-17-2015, 08:53 PM   #335
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Jim; you already know all about my luck with craigslist transmissions!!!!
skymangs is offline   Reply With Quote
Old 03-17-2015, 09:10 PM   #336
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

OK, so here is the whole story on the TPI quitting issue. I took the truck 4hrs to West Plains, MO. To see my buddy, the be all and end all of GM stand alone fuel injection, Brendan Patten (he operates the web site "lt1swap.com" and is an industry leader in developing software and pioneering new stand alone swaps. Only the best for Cecil!

After discussing all the steps I had taken, he was scratching his head as well. Brendan used a GM scan tool to read real time data, and noticed that the MAP sensor vaccum appeared to be responding sluggishly. The culprit was a piece of mud dauber nest lodged in the vaccum fitting for the MAP sensor (on the bottom rear of the intake). It was causing intermittent vaccum loss to the MAP and dumping fuel to compensate for an misinterpreted lean condition. What the hell! A mud dauber nest??? Really? I never would have found that!

Guess that should have been expected since it sat in an Oklahoma barn for 27 years LoL...

I went to get some miles on her today, but as soon as it hits 3rd gear it just revs free.... Runs like a striped ape in 1st and second though! I should have a video up tomorrow.

Last edited by skymangs; 03-17-2015 at 09:17 PM.
skymangs is offline   Reply With Quote
Old 03-17-2015, 09:48 PM   #337
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Glad you have the engine concern fixed and sorry to hear about the transmission. Hopefully no more bugs!
Advanced Design is offline   Reply With Quote
Old 03-17-2015, 10:09 PM   #338
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Well at least he is moving and "road worthy". Someone PM'd me about the new April truck of the month contest "Do you drive that" What do think does Cecil meet the criteria for it since he he now moving on his own?
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline   Reply With Quote
Old 03-17-2015, 11:19 PM   #339
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Quote:
Originally Posted by skymangs View Post
OK, so here is the whole story on the TPI quitting issue. I took the truck 4hrs to West Plains, MO. To see my buddy, the be all and end all of GM stand alone fuel injection, Brendan Patten.
Damn Chris, wish I had know, Brendan lives about 10 minutes from my place, we could have hooked up...Jim
oldman3 is offline   Reply With Quote
Old 03-18-2015, 12:13 AM   #340
lower50's
Registered User
 
lower50's's Avatar
 
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Great news about the motor. That type of problem can make you start to second guess yourself, but a mud dauber nest. Why would you ever think to look for something like that. Guess that's why we have guru's. Sucks about tranny.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459
https://67-72chevytrucks.com/vboard/...d.php?t=769441
1951 MG TD
1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers.
1952 GMC 9700 p/u 7.3L diesel on air, dually
lower50's is offline   Reply With Quote
Old 03-18-2015, 12:14 AM   #341
918733
Registered User
 
Join Date: Jul 2007
Location: Lufkin Texas
Posts: 213
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

We call'em dirt dobbers had one clog up the vent tube on the trans on my Harley and it was building up pressure and forcing fluid out from around the clutch cable couldn't figure that leak out had a buddy who had the same problem and figured it out
918733 is offline   Reply With Quote
Old 03-18-2015, 08:00 AM   #342
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Awe damn Jim. Missed opportunity. I'm sure I'll come up with an excuse to go back again. LoL

My vote for truck of the month goes to Cecil, but I may be biased.


FREAKIN MUD DAUBERS!!!
skymangs is offline   Reply With Quote
Old 03-20-2015, 02:07 PM   #343
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Here is a short video of Cecil proving he is road worthy. He runs good in first and second. Re man tranny going in hopefully next week.

https://www.facebook.com/video.php?v=717777815008048
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline   Reply With Quote
Old 03-21-2015, 03:44 PM   #344
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Here are few glamour shots of Cecil
Attached Images
 
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline   Reply With Quote
Old 03-21-2015, 03:47 PM   #345
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Looks like a one at a time upload
Attached Images
 
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline   Reply With Quote
Old 03-21-2015, 03:48 PM   #346
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

One more
Attached Images
 
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline   Reply With Quote
Old 03-21-2015, 03:57 PM   #347
MIKESAD50
Registered User
 
Join Date: Feb 2014
Location: Sunnyvale, CA
Posts: 605
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Turned out very Nice
__________________
1950 3100 5 window
MIKESAD50 is offline   Reply With Quote
Old 03-21-2015, 04:46 PM   #348
T Hilde
Registered User
 
Join Date: Apr 2009
Location: Faribault, MN
Posts: 385
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Looking studly
T Hilde is offline   Reply With Quote
Old 03-21-2015, 05:24 PM   #349
Sim6
Registered User
 
Sim6's Avatar
 
Join Date: Feb 2015
Location: Centerton, AR
Posts: 433
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

Looks amazing!
Sim6 is offline   Reply With Quote
Old 03-21-2015, 07:51 PM   #350
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
Re: Cecil the 1953 5 window / S-10 / 5.7 TPI

He's got the look! Nailed it!
Advanced Design is offline   Reply With Quote
Reply

Bookmarks

Tags
5 window, 5.7 tpi, chevy truck, rusto mod, s-10 chassis swap


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com