Vintage Air Sale - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Beetle · 07-20-2012, 05:03 AM

Lookin for a 69 non a/c complete under dash kit shipped to 27370. trying to see how much I need to spend on this! Hope you got good news for me.

Thanks.

big d's red67 · 07-20-2012, 10:38 AM

I need a price on the sure fit kit without a compreesor for a 67 chevy factory a/c cab shipped to 74014

Scottshotrods · 07-20-2012, 11:57 AM

Quote:

Originally Posted by Beetle

Lookin for a 69 non a/c complete under dash kit shipped to 27370. trying to see how much I need to spend on this! Hope you got good news for me.

Thanks.

p/m sent

Justin

Scottshotrods · 07-20-2012, 12:01 PM

Quote:

Originally Posted by big d's red67

I need a price on the sure fit kit without a compreesor for a 67 chevy factory a/c cab shipped to 74014

p/m sent

Justin

sunk99 · 07-22-2012, 11:42 AM

I need a price on a sure fit kit for a 69 suburban without factory air. I will probably add another unit overhead in the rear also. If you know what I need for the rear you can price both units otherwise just price the front shipped to 37931 , thanks.
Posted via Mobile Device

**rob32472** · 07-22-2012, 09:15 PM

price for a sure fit system using firewall bulk head and rotary dial control no compressor needed. this for an air cab

496bb · 07-22-2012, 10:35 PM

Hey, 69 non a/c truck here- shoot me some info please. Thanks! Oh and, if I decide to do an LS swap is there anything different that I would have to change? Have an LS engine but not sure I want to swap it in for awhile- would like to have AC sooner!!

Scottshotrods · 07-23-2012, 11:45 AM

Quote:

Originally Posted by sunk99

I need a price on a sure fit kit for a 69 suburban without factory air. I will probably add another unit overhead in the rear also. If you know what I need for the rear you can price both units otherwise just price the front shipped to 37931 , thanks.
Posted via Mobile Device

p/m sent

Justin

Scottshotrods · 07-23-2012, 12:10 PM

Quote:

Originally Posted by rob32472

price for a sure fit system using firewall bulk head and rotary dial control no compressor needed. this for an air cab

p/m sent

Justin

Scottshotrods · 07-23-2012, 12:14 PM

Quote:

Originally Posted by 496bb

Hey, 69 non a/c truck here- shoot me some info please. Thanks! Oh and, if I decide to do an LS swap is there anything different that I would have to change? Have an LS engine but not sure I want to swap it in for awhile- would like to have AC sooner!!

p/m sent

Justin

sixysixss · 07-23-2012, 01:54 PM

Justin,

Looking for a Sure Fit system for a 1966, non-A/C GMC truck. Thanks.

Scottshotrods · 07-23-2012, 03:00 PM

Quote:

Originally Posted by sixysixss

Justin,

Looking for a Sure Fit system for a 1966, non-A/C GMC truck. Thanks.

p/m sent

Justin

LakeAnna · 07-26-2012, 06:45 AM

Justin I need a Kit for my 72 build. The truck was non/ac model... I have installed a new fastburn with the GM/Delco serp kit that has the 88964849 compressor. Can you get together what I need? I would like to place an order asap. Thanks!

Chris
540-967-7724

Scottshotrods · 07-26-2012, 02:40 PM

Quote:

Originally Posted by LakeAnna

Justin I need a Kit for my 72 build. The truck was non/ac model... I have installed a new fastburn with the GM/Delco serp kit that has the 88964849 compressor. Can you get together what I need? I would like to place an order asap. Thanks!

Chris
540-967-7724

P/m sent & left you mess on your phone

Justin

Boise69 · 07-28-2012, 12:20 PM

I need a vintage air/heat set up for my non AC '69 c10. I will be running a zz4 set up if that matters
Posted via Mobile Device

Scottshotrods · 07-28-2012, 05:24 PM

Quote:

Originally Posted by Boise69

I need a vintage air/heat set up for my non AC '69 c10. I will be running a zz4 set up if that matters
Posted via Mobile Device

p/m sent

Justin

Harpie · 08-03-2012, 05:29 PM

Looking for a setup up for my 71 c10 non ac cab but I have swapped in a vortec 5.7 with all the efi goodies so will that mess me up or can I use my factory compressor. I also want to run the vintage air knob style controls looking to order ASAP I need to get my dash cut so my paint man can get to work. I also sent ya a pm. Thanks Chad
Posted via Mobile Device

Scottshotrods · 08-06-2012, 10:52 AM

Quote:

Originally Posted by Harpie

Looking for a setup up for my 71 c10 non ac cab but I have swapped in a vortec 5.7 with all the efi goodies so will that mess me up or can I use my factory compressor. I also want to run the vintage air knob style controls looking to order ASAP I need to get my dash cut so my paint man can get to work. I also sent ya a pm. Thanks Chad
Posted via Mobile Device

p/m sent

Justin

SunSoaked · 08-06-2012, 12:07 PM

I need a serpantine pulley for my new 508 compressor. Where can I get just the pulley since VA wont sell it individually.

Thanks, Mike

Scottshotrods · 08-07-2012, 08:30 PM

Quote:

Originally Posted by SunSoaked

I need a serpantine pulley for my new 508 compressor. Where can I get just the pulley since VA wont sell it individually.

Thanks, Mike

Here is a place I found for you alibaba.com

Justin

VA72C10 · 08-07-2012, 08:37 PM

Quote:

Originally Posted by SunSoaked

I need a serpantine pulley for my new 508 compressor. Where can I get just the pulley since VA wont sell it individually.

Thanks, Mike

Since they don't have it, I have a New in box Vintage Air serpentine clutch assembly. Part# 05511-VUA Listed for 150. Will take 90 shipped.

VA72C10 · 08-07-2012, 08:39 PM

I am actually looking to price out a vintage air kit also. For a truck that came with factory air. I have the controller already so I don't need that. I am going to shave the firewall so I would like a separate price on a nice looking bulkhead for the hoses...but I might also hide them in the cowl area as others have...so please list it separately....

Satin69 · 08-08-2012, 03:53 PM

I need a quote on a sure fit kt for a non-ac 1969. I will need fac controller and fac vents.

Scottshotrods · 08-08-2012, 05:20 PM

Quote:

Originally Posted by VA72C10

I am actually looking to price out a vintage air kit also. For a truck that came with factory air. I have the controller already so I don't need that. I am going to shave the firewall so I would like a separate price on a nice looking bulkhead for the hoses...but I might also hide them in the cowl area as others have...so please list it separately....

p/m sent

Justin

Scottshotrods · 08-08-2012, 05:27 PM

Quote:

Originally Posted by Satin69

I need a quote on a sure fit kt for a non-ac 1969. I will need fac controller and fac vents.

p/m sent
Justin

07-20-2012, 05:03 AM	#326
Beetle Registered User Join Date: May 2009 Location: Fayetteville, NC Posts: 725	Re: Vintage Air Sale Lookin for a 69 non a/c complete under dash kit shipped to 27370. trying to see how much I need to spend on this! Hope you got good news for me. Thanks. __________________ Jason TEAM C10 HOT ROD POWER TOUR 689 Short Step 68 Step Trucks Sold: 70 GMC, 72 K5 Members met: Andy4639 GCncsuHD CSGAS zicc1835 hotrod farm truck Mingrao Bhelton brenthiggins

07-20-2012, 10:38 AM	#327
big d's red67 Registered User Join Date: May 2010 Location: Broken Arrow Okla. Posts: 510	Re: Vintage Air Sale I need a price on the sure fit kit without a compreesor for a 67 chevy factory a/c cab shipped to 74014 __________________ 1967 swb 454 cid 700R4 trans SOLD 2006 Chevy Trailblazer SS 2013 Camaro RS convertible the wife's Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=573248

07-22-2012, 11:42 AM	#330
sunk99 Registered User Join Date: Sep 2011 Location: Knoxville TN Posts: 399	Re: Vintage Air Sale I need a price on a sure fit kit for a 69 suburban without factory air. I will probably add another unit overhead in the rear also. If you know what I need for the rear you can price both units otherwise just price the front shipped to 37931 , thanks. Posted via Mobile Device

07-22-2012, 09:15 PM	#331
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: Vintage Air Sale price for a sure fit system using firewall bulk head and rotary dial control no compressor needed. this for an air cab

07-22-2012, 10:35 PM	#332
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: Vintage Air Sale Hey, 69 non a/c truck here- shoot me some info please. Thanks! Oh and, if I decide to do an LS swap is there anything different that I would have to change? Have an LS engine but not sure I want to swap it in for awhile- would like to have AC sooner!!

07-23-2012, 01:54 PM	#336
sixysixss Registered User Join Date: Jul 2012 Location: Chatsworth, CA Posts: 30	Re: Vintage Air Sale Justin, Looking for a Sure Fit system for a 1966, non-A/C GMC truck. Thanks.

07-26-2012, 06:45 AM	#338
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: Vintage Air Sale Justin I need a Kit for my 72 build. The truck was non/ac model... I have installed a new fastburn with the GM/Delco serp kit that has the 88964849 compressor. Can you get together what I need? I would like to place an order asap. Thanks! Chris 540-967-7724 __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

07-28-2012, 12:20 PM	#340
Boise69 The Hammer Man Join Date: Oct 2006 Location: Wilmington, NC Posts: 864	Re: Vintage Air Sale I need a vintage air/heat set up for my non AC '69 c10. I will be running a zz4 set up if that matters Posted via Mobile Device

08-03-2012, 05:29 PM	#342
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: Vintage Air Sale Looking for a setup up for my 71 c10 non ac cab but I have swapped in a vortec 5.7 with all the efi goodies so will that mess me up or can I use my factory compressor. I also want to run the vintage air knob style controls looking to order ASAP I need to get my dash cut so my paint man can get to work. I also sent ya a pm. Thanks Chad Posted via Mobile Device

08-06-2012, 12:07 PM	#344
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,525	Re: Vintage Air Sale I need a serpantine pulley for my new 508 compressor. Where can I get just the pulley since VA wont sell it individually. Thanks, Mike

08-07-2012, 08:39 PM	#347
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Vintage Air Sale I am actually looking to price out a vintage air kit also. For a truck that came with factory air. I have the controller already so I don't need that. I am going to shave the firewall so I would like a separate price on a nice looking bulkhead for the hoses...but I might also hide them in the cowl area as others have...so please list it separately.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-08-2012, 03:53 PM	#348
Satin69 Registered User Join Date: Mar 2012 Location: Gunter, TX Posts: 169	Re: Vintage Air Sale I need a quote on a sure fit kt for a non-ac 1969. I will need fac controller and fac vents. __________________ 1956 GMC undergoing LS Swap



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.