Killers 5.3L install - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72BlckButy · 08-30-2007, 01:54 PM

Love the steering wheel! Can't wait to see if completed!

68 short step · 09-02-2007, 02:03 PM

ok im long over due for an update... so here it is..
got the dr side fender on as well as the hood.. i then installed the carpet, finished up for the most part the interior...made a a/c controller houseing out of the old factory one....some friends came over and helped put the bed back on.. and i installed the rad. over flow catch can in front of the rad. support...put the grille on and installed the guages.... hide the DLC port under the dash, but still made it real easy to get to.. and here is a little sneak peak at the engine bay.

68 short step · 09-02-2007, 02:03 PM

SCOTI · 09-02-2007, 02:09 PM

You should be proud!

1LoC10 · 09-02-2007, 02:18 PM

beautiful

meathead95 · 09-02-2007, 03:52 PM

looks awesome. keep up the good work.

msgross · 09-02-2007, 03:54 PM

now that's clean...

very nice...

Are you going to cover the Dynamat on the firewall with the standard black cardboard pieces?

killer71 · 09-02-2007, 04:41 PM

I'm gonna be greeeeedddddy and ask ya.....WHEN DO WE CRANK THIS BAD BOY?????

Truly some great work by a great guy...Everything I wanted and more!

68 short step · 09-02-2007, 04:58 PM

Quote:

Originally Posted by killer71

I'm gonna be greeeeedddddy and ask ya.....WHEN DO WE CRANK THIS BAD BOY?????

Truly some great work by a great guy...Everything I wanted and more!

i want to just as bad as you do, but the computer needs the Vehicle Anti-Theft System removed so it can run.... thats why it'll be towed to OK to have Glen do the tune on it, this will also be the true test to see if all the wiring i did is right.

ChevyChad · 09-02-2007, 06:57 PM

I am Chad Hulse, and I approve this truck

Yep, pretty good work. He makes me proud- I taught 68ss everything he knows

killer71 · 09-02-2007, 07:35 PM

Quote:

Originally Posted by 68 short step

i want to just as bad as you do, but the computer needs the Vehicle Anti-Theft System removed so it can run.... thats why it'll be towed to OK to have Glen do the tune on it, this will also be the true test to see if all the wiring i did is right.

Ahh, I see! I was under the impression we would send it to speartech for them to remove vats...Anyways let me know when cuz i'm up for a road trip!

killer71 · 09-02-2007, 07:37 PM

Quote:

Originally Posted by ChevyChad

I am Chad Hulse, and I approve this truck

Yep, pretty good work. He makes me proud- I taught 68ss everything he knows

And a fine job you did...so which one of you is gonna do my Nova???

ChevyChad · 09-02-2007, 09:21 PM

Quote:

Originally Posted by killer71

And a fine job you did...so which one of you is gonna do my Nova???

LOL I better leave that to little bro. I can do that stuff, but anymore I prefer to sit in front of a computer designing airplanes in the air conditioning. I only get my hands dirty when I work on my own stuff

68 short step · 09-02-2007, 09:30 PM

Quote:

Originally Posted by killer71

And a fine job you did...so which one of you is gonna do my Nova???

gonna git it????

killer71 · 09-02-2007, 09:53 PM

Quote:

Originally Posted by 68 short step

gonna git it????

I can't tell you everything!!!

ChevyChad · 09-02-2007, 10:33 PM

You gotta give him back his truck first before he sends you another project

But I got a feeling once he sees the quality and craftsmanship of the truck first hand in person, he'll want something just as good for a Nova

I mean, after you got something of this caliber there is no going back afterwards

killer71 · 09-02-2007, 10:45 PM

chevychad...I gotta put some coins back first...baby brother has drained me!

but i can't wait for the next project!

killer71 · 09-03-2007, 04:18 PM

Don did you ever get the drive shaft?

68 short step · 09-03-2007, 04:22 PM

Quote:

Originally Posted by killer71

Don did you ever get the drive shaft?

yes i did. its 3" steel ,.083 wall thickness, HD u-joints, and a new slip yoke... painted black, and already installed.

killer71 · 09-03-2007, 04:25 PM

okey dokey. i was wanderin

killer71 · 09-03-2007, 04:28 PM

any info on the flapper handle?

68 short step · 09-03-2007, 09:27 PM

Quote:

Originally Posted by killer71

any info on the flapper handle?

no nothing yet.

killer71 · 09-03-2007, 09:42 PM

hey looks like you gave the gas cap the shifty invention ehh???

68 short step · 09-03-2007, 10:26 PM

ooo yea......

shifty · 09-03-2007, 11:08 PM

that a/c setup looks great, i'm gonna hafta borrow that one

08-30-2007, 01:54 PM	#326
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Killers 5.3L install Love the steering wheel! Can't wait to see if completed! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-02-2007, 02:03 PM	#327
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Killers 5.3L install ok im long over due for an update... so here it is.. got the dr side fender on as well as the hood.. i then installed the carpet, finished up for the most part the interior...made a a/c controller houseing out of the old factory one....some friends came over and helped put the bed back on.. and i installed the rad. over flow catch can in front of the rad. support...put the grille on and installed the guages.... hide the DLC port under the dash, but still made it real easy to get to.. and here is a little sneak peak at the engine bay. Last edited by 68 short step; 01-10-2008 at 03:30 PM.

09-02-2007, 02:03 PM	#328
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Killers 5.3L install Last edited by 68 short step; 01-10-2008 at 03:30 PM.

09-02-2007, 02:09 PM	#329
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,072	Re: Killers 5.3L install You should be proud! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-02-2007, 02:18 PM	#330
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Killers 5.3L install beautiful __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

09-02-2007, 03:52 PM	#331
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Killers 5.3L install looks awesome. keep up the good work. __________________ 72 2wd blazer 72 swb 4x4

09-02-2007, 03:54 PM	#332
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Killers 5.3L install now that's clean... very nice... Are you going to cover the Dynamat on the firewall with the standard black cardboard pieces? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-02-2007, 04:41 PM	#333
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Killers 5.3L install I'm gonna be greeeeedddddy and ask ya.....WHEN DO WE CRANK THIS BAD BOY????? Truly some great work by a great guy...Everything I wanted and more! __________________ R.I.P. Killer 71 10/26/07

09-02-2007, 06:57 PM	#335
ChevyChad Registered User Join Date: Aug 2007 Location: Owasso, OK Posts: 44	Re: Killers 5.3L install I am Chad Hulse, and I approve this truck Yep, pretty good work. He makes me proud- I taught 68ss everything he knows Last edited by ChevyChad; 09-02-2007 at 06:57 PM.

09-02-2007, 10:33 PM	#341
ChevyChad Registered User Join Date: Aug 2007 Location: Owasso, OK Posts: 44	Re: Killers 5.3L install You gotta give him back his truck first before he sends you another project But I got a feeling once he sees the quality and craftsmanship of the truck first hand in person, he'll want something just as good for a Nova I mean, after you got something of this caliber there is no going back afterwards

09-02-2007, 10:45 PM	#342
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Killers 5.3L install chevychad...I gotta put some coins back first...baby brother has drained me! but i can't wait for the next project! __________________ R.I.P. Killer 71 10/26/07

09-03-2007, 04:18 PM	#343
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Killers 5.3L install Don did you ever get the drive shaft? __________________ R.I.P. Killer 71 10/26/07

09-03-2007, 04:25 PM	#345
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Killers 5.3L install okey dokey. i was wanderin __________________ R.I.P. Killer 71 10/26/07

09-03-2007, 04:28 PM	#346
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Killers 5.3L install any info on the flapper handle? __________________ R.I.P. Killer 71 10/26/07

09-03-2007, 09:42 PM	#348
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Killers 5.3L install hey looks like you gave the gas cap the shifty invention ehh??? __________________ R.I.P. Killer 71 10/26/07



Register or Log In To remove these advertisements.

09-03-2007, 10:26 PM	#349
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Killers 5.3L install ooo yea......

09-03-2007, 11:08 PM	#350
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Killers 5.3L install that a/c setup looks great, i'm gonna hafta borrow that one __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

Register or Log In To remove these advertisements.