Show us your seats - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blackcloud45 · 03-11-2014, 06:15 PM

Quote:

Originally Posted by tazattitude

even has a small air compressor for lumbar
F150 seat - yes I know. But I liked the shape of the seat

What year F150? That looks like it was made for it!

lucifer · 03-11-2014, 07:56 PM

super comfy seats!
Name: interior.jpg
Views: 5148
Size: 44.7 KB

NevEno · 03-04-2015, 11:33 PM

These are the seats I'm using out of a 2010 crewcab super duty in my 64.. I know, I know f**d. I wanted a tan leather seat without spending a ton of $$$!! The seat fits the cab very well. They are the rear seat so they are not adjustable.

Hx16457 · 09-30-2018, 04:11 PM

Quote:

Originally Posted by lucifer

super comfy seats!
Attachment 1226445

High Country seats! My wife has those same seats in her High Country 2017, 4x4 6.2L. Very nice!
Posted via Mobile Device

1963c-10 · 03-10-2014, 03:02 PM

Quote:

Originally Posted by NEWFISHER

67-87 seats are supposed to be a direct bolt in. 88-99 bench seats use the same forward mounting bolts and must fabricate rear. Other than those, it's all fabricating to get them in. Installing seats on a somewhat flat floor has to be the easiest fabrication out there. if someone stumbles here, they will have a long road ahead of them on the rest of the build

Seats are so personal also. What may work and fit for one, may not another. It's best to try what you like and then make it work.

I have a 67 bench seat in my 63 fleet (temporary) and it fit in the stock location just fine. The 67-68 used a larger mounting bolt for the cab/seat mount, but the stock bolts held it in just fine. Other than the track adjuster arm/knob, they tracks look the same. The seats look pretty close other than full depth foam as opposed to the flat foam used in the standard 60-66 seats

**LostMy65** · 08-29-2014, 10:15 PM

A little update.
Ordered some Iggee seat covers for my fiero seats. Here they are just slipped on but not cinched down yet. They'll look better once they're tightened down.
Well... they looked like they were missing something, so I picked up a buddy seat that fits nicely between.
This gives me that little nostalgia of the buddy buckets I had back in the 80's.

**LostMy65** · 09-30-2014, 12:33 AM

Quote:

Originally Posted by LostMy65

A little update.
Ordered some Iggee seat covers for my fiero seats. Here they are just slipped on but not cinched down yet. They'll look better once they're tightened down.
Well... they looked like they were missing something, so I picked up a buddy seat that fits nicely between.
This gives me that little nostalgia of the buddy buckets I had back in the 80's.

.
The pic above was done with a photo editing app to make the center seat blue.
Here it is after I dyed the vinyl of the center seat.

SayBye · 09-29-2014, 09:43 PM

Installed a 2nd row bench from a 99 Tahoe in mine...

Garagisti · 10-01-2014, 06:47 PM

Here's mine....

Strodder · 10-01-2014, 10:07 PM

Quote:

Originally Posted by Garagisti

Here's mine....

Now those look comphy.

Garagisti · 10-03-2014, 12:14 PM

Quote:

Originally Posted by Strodder

Now those look comphy.

They are! I drove it from Huntington Beach, Ca to Vegas last year. My upholstery guy restuffed and made the bolsters. Super comfy. We also added heated seats, which I have yet to use.

Strodder · 12-14-2014, 10:11 PM

Quote:

Originally Posted by Garagisti

They are! I drove it from Huntington Beach, Ca to Vegas last year. My upholstery guy restuffed and made the bolsters. Super comfy. We also added heated seats, which I have yet to use.

Who did it and was he reasonable?

WhippinSaw · 03-04-2015, 06:59 PM

Here's my 63, had it stock for 30 years, thinking about changing it back when the new seat wears out.

bmur66 · 10-06-2014, 06:34 AM

I scored a "brand new" takeout 1986 GMC bench for my "65 GMC

**LostMy65** · 10-06-2014, 11:25 PM

Quote:

Originally Posted by bmur66

I scored a "brand new" takeout 1986 GMC bench for my "65 GMC

.
That goes real nice in there.
I like it.

rudyyloverboiii · 12-05-2014, 12:58 PM

Anyone know where i can get those fuzzy dash covers?

LVPhotos · 12-05-2014, 01:30 PM

Your local fab...ric shop. Cut and paste.

Jahloha · 12-14-2014, 12:27 AM

Quote:

Originally Posted by tazattitude

even has a small air compressor for lumbar
F150 seat - yes I know. But I liked the shape of the seat

What year F150? I am liking these. Also, how tall are you? Looking for a setup for a my height, 6'4''

**tazattitude** · 12-14-2014, 08:24 AM

It is out of a early 90's F-150. I am 5'8, but I also put 1" spacers in the bottom brackets of the seat.

Jim53066 · 03-14-2015, 12:37 PM

Buckets out of a 1999 Cadillac Catera (sp?) the console is out of an 80's GM truck (I think)

Jim

mailman · 02-15-2017, 12:24 AM

Quote:

Originally Posted by Jim53066

Buckets out of a 1999 Cadillac Catera (sp?) the console is out of an 80's GM truck (I think)

Jim

How did you raise the center console?

jwild65 · 04-24-2015, 12:13 AM

i have tan power heated leather seats from a 2006 bmw 330xi. they are sweet. very comfortable and look pretty sweet. still test fitting, but will fully install soon.

bcontractor · 04-25-2015, 12:19 AM

Mine are a little more useful for long trips....its a 1.6 lowflow quiet flush one piece.....I went with with the one piece as I thought the tank would get too many vibrations when driving.Round bowl also too as not to sit to close to the steering wheel...Now I am looking for an old beer keg to mount in the bed for water supply and going to put a air valve on to so I can charge for pressure..ehehehhehe

nad never leave the seat up !!!

Slow Build · 04-25-2015, 01:16 AM

Quote:

Originally Posted by bcontractor

Mine are a little more useful for long trips....

I think that would be better in a small window......Oh, and doors, definitely with doors.

Strodder · 06-18-2015, 05:09 PM

Quote:

Originally Posted by bcontractor

Mine are a little more useful for long trips....its a 1.6 lowflow quiet flush one piece.....I went with with the one piece as I thought the tank would get too many vibrations when driving.Round bowl also too as not to sit to close to the steering wheel...Now I am looking for an old beer keg to mount in the bed for water supply and going to put a air valve on to so I can charge for pressure..ehehehhehe

nad never leave the seat up !!!

03-11-2014, 07:56 PM	#2
lucifer Registered User Join Date: Mar 2010 Location: simcoe ontario canada Posts: 681	Re: Show us you're seats super comfy seats! __________________ 65 burb On the road Mar 26th Finally

03-04-2015, 11:33 PM	#3
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: Show us you're seats These are the seats I'm using out of a 2010 crewcab super duty in my 64.. I know, I know f**d. I wanted a tan leather seat without spending a ton of $$$!! The seat fits the cab very well. They are the rear seat so they are not adjustable. Attached Images __________________ You can find me on Instagram @neveno_cten

08-29-2014, 10:15 PM	#6
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,522	Re: Show us you're seats A little update. Ordered some Iggee seat covers for my fiero seats. Here they are just slipped on but not cinched down yet. They'll look better once they're tightened down. Well... they looked like they were missing something, so I picked up a buddy seat that fits nicely between. This gives me that little nostalgia of the buddy buckets I had back in the 80's. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

09-29-2014, 09:43 PM	#8
SayBye Registered User Join Date: Jul 2014 Location: Chattanooga Tn Posts: 231	Re: Show us you're seats Installed a 2nd row bench from a 99 Tahoe in mine... Attached Images __________________ My Jalopy - http://67-72chevytrucks.com/vboard/s...d.php?t=641102

10-01-2014, 06:47 PM	#9
Garagisti Registered User Join Date: Jan 2013 Location: Huntington Beach, Ca Posts: 19	Re: Show us you're seats Here's mine.... __________________ 1965 Chevrolet C10 2016 Mercedes S550 1992 Mercedes 300TE

03-04-2015, 06:59 PM	#13
WhippinSaw Registered User Join Date: Aug 2012 Location: Lisle Illinois Posts: 602	Re: Show us you're seats Here's my 63, had it stock for 30 years, thinking about changing it back when the new seat wears out. Attached Images __________________ 1963 Fleet Side cab, Converted Fleet Side Barden bumper, Step Side in the middle.

10-06-2014, 06:34 AM	#14
bmur66 Registered User Join Date: Feb 2013 Location: Olean, NY Posts: 92	Re: Show us you're seats I scored a "brand new" takeout 1986 GMC bench for my "65 GMC Attached Images __________________ No Weak Links

12-05-2014, 12:58 PM	#16
rudyyloverboiii Registered User Join Date: Nov 2014 Location: IE California Posts: 225	Re: Show us you're seats Anyone know where i can get those fuzzy dash covers?

12-05-2014, 01:30 PM	#17
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: Show us you're seats Your local fab...ric shop. Cut and paste. __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

12-14-2014, 08:24 AM	#19
tazattitude Senior Member Join Date: Oct 2010 Location: Largo, FL Posts: 532	Re: Show us you're seats It is out of a early 90's F-150. I am 5'8, but I also put 1" spacers in the bottom brackets of the seat. __________________ TAZ BUILDS 1966 GMC Suburban 1963 GMC Suburban Patina frame-on FOR Sale 1966 C10 Short Bed (2010-11) Monthly Updates 2015 C10 Pics with my '72 Montego GT 429/521 build 1963 Pro Street C10 back halved. Frame off I did back in 1990 Pics / Video

03-14-2015, 12:37 PM	#20
Jim53066 Registered User Join Date: Aug 2013 Location: SE Wisconsin Posts: 129	Re: Show us you're seats Buckets out of a 1999 Cadillac Catera (sp?) the console is out of an 80's GM truck (I think) Jim

04-24-2015, 12:13 AM	#22
jwild65 Registered User Join Date: Jul 2012 Location: spokane, WA Posts: 3	Re: Show us you're seats i have tan power heated leather seats from a 2006 bmw 330xi. they are sweet. very comfortable and look pretty sweet. still test fitting, but will fully install soon. Attached Images

04-25-2015, 12:19 AM	#23
bcontractor Registered User Join Date: Sep 2014 Location: santa rosa,california Posts: 65	Re: Show us you're seats Mine are a little more useful for long trips....its a 1.6 lowflow quiet flush one piece.....I went with with the one piece as I thought the tank would get too many vibrations when driving.Round bowl also too as not to sit to close to the steering wheel...Now I am looking for an old beer keg to mount in the bed for water supply and going to put a air valve on to so I can charge for pressure..ehehehhehe nad never leave the seat up !!! Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.