Irish's 1966 LWB Fleetside - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

irish1966 · 01-15-2011, 12:11 PM

Quote:

Originally Posted by 66farmer

It looks like your moving right along. I hope to get engine block back from the machine shop next week and get the engine together and installed in the frame.
Keep up the good work.
Keith

thx man. you too. I bet you're excited about getting that motor back? I'm wishing i had a shop like yours these days. I'd never go into the house. All it needs is a big screen. Make sure you post pics.

irish1966 · 01-15-2011, 12:18 PM

updated pics of the gauges:

Added blinker lights and high beam light.

63lemon · 01-15-2011, 12:23 PM

Where did you get your guages at? i like them

irish1966 · 01-15-2011, 12:25 PM

Quote:

Originally Posted by 63lemon

Where did you get your guages at? i like them

O'Reillys/Baxters

The tach and the Speedo were a little spendy, but I get a killer discount, so I grabbed em.

edit: I think I'm gonna have to look at the Fuel gauge. I believe its a 0/90. SHows Wayyyyy full with a full tank.

63lemon · 01-15-2011, 03:52 PM

thanks i gonna take a drive to O'reileys and check em out

Alan's Classic · 01-16-2011, 12:19 AM

It's been a while since I looked at your build. Very nice progress and work, keep it up.

irish1966 · 01-16-2011, 12:29 AM

Thx Alan. As if I didn't have enough to be doing, but the sickness took hold and I bought a 64 short bed today. I'll post pics soon. I got it REALLY cheap.
Posted via Mobile Device

irish1966 · 01-16-2011, 01:14 AM

Well, here she is.........Got her for $400 with an extra set of fenders, and a 72 column.

1964 Shorty with a 230 and a 4spd.

irish1966 · 01-16-2011, 01:16 AM

And, she came with her high heels on. Those bad boys are 16" rims and I measured the tire to be ~30". She is now 3" lower both front and rear. :-)

irish1966 · 01-16-2011, 02:35 AM

A bit of background on this one....

My good friend Tommy, has been an integral part of getting and keeping our fleet going. He can build a carb blindfolded. He is old school NHRA and one of the coolest guys I've met. Anyways, he has the golden touch when it comes to carbs and motors and me and old skool decided it was time to build him a truck with a personal touch.
Posted via Mobile Device

alwaysbroken · 01-16-2011, 02:36 AM

sick truck buddy. keep up the good work

irish1966 · 01-16-2011, 02:40 AM

Quote:

Originally Posted by alwaysbroken

sick truck buddy. keep up the good work

Thx man.

Posted via Mobile Device

protrash64 · 01-16-2011, 09:57 AM

........keep recycling the parts!!!!

irish1966 · 01-19-2011, 07:55 PM

couple more pics.

The interior as we bought it, and then again after I got stuck in and cleaned it up.

irish1966 · 01-19-2011, 08:00 PM

more pics

irish1966 · 01-19-2011, 08:11 PM

Tommy getting stuck in...

nachodog2 · 01-21-2011, 01:05 AM

Hey irish, what kind of sound deadener is that?
Posted via Mobile Device

irish1966 · 01-21-2011, 01:51 AM

Quote:

Originally Posted by nachodog2

Hey irish, what kind of sound deadener is that?
Posted via Mobile Device

It's peel'n'seal from home depot. Actually, that may not be the name on it, but you will find it in the roofing section in a black and yellow packaged roll. I'll post a pic of the roll in the morning. It works good. Just make sure its warm when u roll it on. I use a heat gun on it before sticking it in place. It makes a big difference.
Posted via Mobile Device

fryer1979 · 01-22-2011, 03:54 PM

What's up Irish? It's been a while since I have had any time to log in and look around here. Nice chunk of progress you've got going on there. And I see you've got yet another pickup.....I've said it before and I'll say it again: you're sic man!

irish1966 · 01-23-2011, 11:14 PM

Quote:

Originally Posted by fryer1979

What's up Irish? It's been a while since I have had any time to log in and look around here. Nice chunk of progress you've got going on there. And I see you've got yet another pickup.....I've said it before and I'll say it again: you're sic man!

Hey Fryer, yeah, another one. I definitely have an addiction. I think I'm done buying em for a while. I almost have the 65 SW finished and tok her on her maiden voyage this evening. I'll post pics in a few

irish1966 · 01-23-2011, 11:25 PM

Almost finished, but took her on her maiden voyage this evening and bought her some wiper blades (in this part of the country that's important LOL)

sorry bout the crappy cell ph pics.

irish1966 · 01-23-2011, 11:39 PM

bed wood added with some nice black outdoor carpet.

**chevy_man5** · 01-23-2011, 11:57 PM

Looking good!!

scum1 · 01-24-2011, 02:40 AM

nice lookin projects man..im diggin all the trucks you have been workin on...what is your paint of choice on these, they look pretty good and im assuming its rattle can for how quick its being done ya? esp the blue one you did a while ago, what did you use for that one??

66farmer · 01-24-2011, 11:00 AM

Dave I picked up some trim parts from a guy on craigs list this weekend he has a 66 chevy long bed that he's parting out cheap he's in Vancouver.
Keith

01-15-2011, 12:18 PM	#327
irish1966 Registered User Join Date: Oct 2009 Location: hillsboro, oregon Posts: 484	Re: Irish's 1966 LWB Fleetside updated pics of the gauges: Added blinker lights and high beam light. Attached Images __________________ Cheers David 66 LWB Fleet (on hold) 64 LWB Fleet (daily driver) 65 SWB Fleet (almost finished as a driver) 64 SWB Fleet (just started - "Tommys Hot Rods" tribute truck) Nothing worth doing, is easy.

01-15-2011, 12:23 PM	#328
63lemon Registered User Join Date: Nov 2010 Location: Millersburg Ohio Posts: 76	Re: Irish's 1966 LWB Fleetside Where did you get your guages at? i like them __________________ Ich möchte vroom vroom

01-15-2011, 03:52 PM	#330
63lemon Registered User Join Date: Nov 2010 Location: Millersburg Ohio Posts: 76	Re: Irish's 1966 LWB Fleetside thanks i gonna take a drive to O'reileys and check em out __________________ Ich möchte vroom vroom

01-16-2011, 12:19 AM	#331
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Irish's 1966 LWB Fleetside It's been a while since I looked at your build. Very nice progress and work, keep it up. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

01-16-2011, 12:29 AM	#332
irish1966 Registered User Join Date: Oct 2009 Location: hillsboro, oregon Posts: 484	Re: Irish's 1966 LWB Fleetside Thx Alan. As if I didn't have enough to be doing, but the sickness took hold and I bought a 64 short bed today. I'll post pics soon. I got it REALLY cheap. Posted via Mobile Device __________________ Cheers David 66 LWB Fleet (on hold) 64 LWB Fleet (daily driver) 65 SWB Fleet (almost finished as a driver) 64 SWB Fleet (just started - "Tommys Hot Rods" tribute truck) Nothing worth doing, is easy.

01-16-2011, 01:14 AM	#333
irish1966 Registered User Join Date: Oct 2009 Location: hillsboro, oregon Posts: 484	Re: Irish's 1966 LWB Fleetside Well, here she is.........Got her for $400 with an extra set of fenders, and a 72 column. 1964 Shorty with a 230 and a 4spd. Attached Images __________________ Cheers David 66 LWB Fleet (on hold) 64 LWB Fleet (daily driver) 65 SWB Fleet (almost finished as a driver) 64 SWB Fleet (just started - "Tommys Hot Rods" tribute truck) Nothing worth doing, is easy. Last edited by irish1966; 01-16-2011 at 01:15 AM.

01-16-2011, 01:16 AM	#334
irish1966 Registered User Join Date: Oct 2009 Location: hillsboro, oregon Posts: 484	Re: Irish's 1966 LWB Fleetside And, she came with her high heels on. Those bad boys are 16" rims and I measured the tire to be ~30". She is now 3" lower both front and rear. :-) __________________ Cheers David 66 LWB Fleet (on hold) 64 LWB Fleet (daily driver) 65 SWB Fleet (almost finished as a driver) 64 SWB Fleet (just started - "Tommys Hot Rods" tribute truck) Nothing worth doing, is easy.

01-16-2011, 02:35 AM	#335
irish1966 Registered User Join Date: Oct 2009 Location: hillsboro, oregon Posts: 484	Re: Irish's 1966 LWB Fleetside A bit of background on this one.... My good friend Tommy, has been an integral part of getting and keeping our fleet going. He can build a carb blindfolded. He is old school NHRA and one of the coolest guys I've met. Anyways, he has the golden touch when it comes to carbs and motors and me and old skool decided it was time to build him a truck with a personal touch. Posted via Mobile Device __________________ Cheers David 66 LWB Fleet (on hold) 64 LWB Fleet (daily driver) 65 SWB Fleet (almost finished as a driver) 64 SWB Fleet (just started - "Tommys Hot Rods" tribute truck) Nothing worth doing, is easy.

01-16-2011, 02:36 AM	#336
alwaysbroken Registered User Join Date: Dec 2010 Location: sooke canada Posts: 211	Re: Irish's 1966 LWB Fleetside sick truck buddy. keep up the good work __________________ chevys the way to go.

01-16-2011, 09:57 AM	#338
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Irish's 1966 LWB Fleetside ........keep recycling the parts!!!! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

01-19-2011, 07:55 PM	#339
irish1966 Registered User Join Date: Oct 2009 Location: hillsboro, oregon Posts: 484	Re: Irish's 1966 LWB Fleetside couple more pics. The interior as we bought it, and then again after I got stuck in and cleaned it up. Attached Images __________________ Cheers David 66 LWB Fleet (on hold) 64 LWB Fleet (daily driver) 65 SWB Fleet (almost finished as a driver) 64 SWB Fleet (just started - "Tommys Hot Rods" tribute truck) Nothing worth doing, is easy.

01-19-2011, 08:00 PM	#340
irish1966 Registered User Join Date: Oct 2009 Location: hillsboro, oregon Posts: 484	Re: Irish's 1966 LWB Fleetside more pics Attached Images __________________ Cheers David 66 LWB Fleet (on hold) 64 LWB Fleet (daily driver) 65 SWB Fleet (almost finished as a driver) 64 SWB Fleet (just started - "Tommys Hot Rods" tribute truck) Nothing worth doing, is easy.

01-19-2011, 08:11 PM	#341
irish1966 Registered User Join Date: Oct 2009 Location: hillsboro, oregon Posts: 484	Re: Irish's 1966 LWB Fleetside Tommy getting stuck in... Attached Images __________________ Cheers David 66 LWB Fleet (on hold) 64 LWB Fleet (daily driver) 65 SWB Fleet (almost finished as a driver) 64 SWB Fleet (just started - "Tommys Hot Rods" tribute truck) Nothing worth doing, is easy.

01-21-2011, 01:05 AM	#342
nachodog2 Hell yeah!!! Join Date: Aug 2010 Location: canyon country Ca. Posts: 264	Re: Irish's 1966 LWB Fleetside Hey irish, what kind of sound deadener is that? Posted via Mobile Device __________________ Stock is good but custom is the sh*t!

01-22-2011, 03:54 PM	#344
fryer1979 Redneck Hillbilly Join Date: Jan 2010 Location: Backwoods Posts: 1,307	Re: Irish's 1966 LWB Fleetside What's up Irish? It's been a while since I have had any time to log in and look around here. Nice chunk of progress you've got going on there. And I see you've got yet another pickup.....I've said it before and I'll say it again: you're sic man!



Register or Log In To remove these advertisements.

01-23-2011, 11:25 PM	#346
irish1966 Registered User Join Date: Oct 2009 Location: hillsboro, oregon Posts: 484	Re: Irish's 1966 LWB Fleetside Almost finished, but took her on her maiden voyage this evening and bought her some wiper blades (in this part of the country that's important LOL) sorry bout the crappy cell ph pics. Attached Images __________________ Cheers David 66 LWB Fleet (on hold) 64 LWB Fleet (daily driver) 65 SWB Fleet (almost finished as a driver) 64 SWB Fleet (just started - "Tommys Hot Rods" tribute truck) Nothing worth doing, is easy.

01-23-2011, 11:39 PM	#347
irish1966 Registered User Join Date: Oct 2009 Location: hillsboro, oregon Posts: 484	Re: Irish's 1966 LWB Fleetside bed wood added with some nice black outdoor carpet. Attached Images __________________ Cheers David 66 LWB Fleet (on hold) 64 LWB Fleet (daily driver) 65 SWB Fleet (almost finished as a driver) 64 SWB Fleet (just started - "Tommys Hot Rods" tribute truck) Nothing worth doing, is easy.

01-23-2011, 11:57 PM	#348
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Irish's 1966 LWB Fleetside Looking good!! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

01-24-2011, 02:40 AM	#349
scum1 Registered User Join Date: Apr 2010 Location: las vegas Posts: 299	Re: Irish's 1966 LWB Fleetside nice lookin projects man..im diggin all the trucks you have been workin on...what is your paint of choice on these, they look pretty good and im assuming its rattle can for how quick its being done ya? esp the blue one you did a while ago, what did you use for that one??

01-24-2011, 11:00 AM	#350
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: Irish's 1966 LWB Fleetside Dave I picked up some trim parts from a guy on craigs list this weekend he has a 66 chevy long bed that he's parting out cheap he's in Vancouver. Keith

Register or Log In To remove these advertisements.