Project "What was I Thinking" 68 SWB - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

raull · 03-06-2012, 09:53 AM

Quote:

Originally Posted by Bennett--G4L

Ok Ok I can't keep a secret lol, it is a Dropmember but not for the front. I ordered a Mild Rear Dropmember. I really liked the fact that I only have to raise the bed floor 5 inches to cover the notch. This way my bed floor will still have a stock look to it just a little raised.
Posted via Mobile Device

yeeessss !!! gona be sweet !!!

FrankieD · 03-06-2012, 12:38 PM

Nice work I am kind of wishing I had a short bed but I will take the long bed over dealing with rust. I am thinking about running my exhaust through the cross member too, did you have to reinforce it after you cut the holes? I am thinking about 5” holes and using 2.5” exhaust out the back.

Bennett68C10 · 03-06-2012, 01:15 PM

Quote:

Originally Posted by FrankieD

Nice work I am kind of wishing I had a short bed but I will take the long bed over dealing with rust. I am thinking about running my exhaust through the cross member too, did you have to reinforce it after you cut the holes? I am thinking about 5” holes and using 2.5” exhaust out the back.

Yeah I wish i didn't have to deal with rust. My truck would have been done 2 years ago if it wasn't for all the rust repair. I reinforced the trailing arm crossmember with 3.5" pipe after the holes were cut out. You definetly want to put some strength back into crossmember after you do it.

Bennett68C10 · 03-06-2012, 01:16 PM

Quote:

Originally Posted by raull

yeeessss !!! gona be sweet !!!

Thanks Raull, I have to stop making changes to it so I can try to finish it

Bennett68C10 · 03-10-2012, 09:19 AM

Got my Slosh Tubz in the other day. Really nice quality, thanks Mike. It's funny when I brought the giant box in the house my Fiance was like "Did you buy a Human"

I was like no they are just my Slosh Tubz. She asked me what they were, I told her my new inner fenders. She was like what is that, I told her nevermind its parts for my truck

Some Pics.

**67cheby** · 03-10-2012, 10:23 AM

Lol, thank you !!

TXPinstriper · 03-10-2012, 10:57 AM

Quote:

Originally Posted by Bennett--G4L

Got my Slosh Tubz in the other day. Really nice quality, thanks Mike. It's funny when I brought the giant box in the house my Fiance was like "Did you buy a Human"

I was like no they are just my Slosh Tubz. She asked me what they were, I told her my new inner fenders. She was like what is that, I told her nevermind its parts for my truck

Some Pics.

Those look killer....

coggonobrien · 03-10-2012, 11:23 AM

Quote:

Originally Posted by Bennett--G4L

Got my Slosh Tubz in the other day. Really nice quality, thanks Mike. It's funny when I brought the giant box in the house my Fiance was like "Did you buy a Human"

I was like no they are just my Slosh Tubz. She asked me what they were, I told her my new inner fenders. She was like what is that, I told her nevermind its parts for my truck

Some Pics.

are those just a taller fender then the stocks?

Bennett68C10 · 03-10-2012, 07:30 PM

Quote:

Originally Posted by TXPinstriper

Those look killer....

Thanks, I'm excited about all the new parts I'm getting for the truck. The vision I had for this build when I first purchased the truck but thought I could never do is finally taking shape.

Quote:

Originally Posted by coggonobrien

are those just a taller fender then the stocks?

Yeah they are made for bagged trucks to lay out on up to a 28" tall tire. Check out 67cheby SloshTubz thread in his signature for more info.

big_al_71 · 03-10-2012, 10:11 PM

Excellent Keith!!!!!!

Can't wait to see it finished
Posted via Mobile Device

72blueshark · 03-10-2012, 10:23 PM

very nice! i wish i could afford parts like that

Bennett68C10 · 03-10-2012, 11:52 PM

Quote:

Originally Posted by big_al_71

Excellent Keith!!!!!!

Can't wait to see it finished
Posted via Mobile Device

Thanks Al, I'm hoping to have it finished by next spring. As long as I don't change anything else I should be able to get it done lol

Quote:

Originally Posted by 72blueshark

very nice! i wish i could afford parts like that

Thankyou, believe me when I started this build two years ago, I couldn't afford these parts either. Things have gotten better which is now allowing me to do some of the things I wanted to do from the start.
Posted via Mobile Device

mcbassin · 03-11-2012, 01:52 AM

Congrats on the new parts. I'm glad to see Mike's product going to good use.

Bennett68C10 · 03-11-2012, 10:51 AM

Quote:

Originally Posted by mcbassin

Congrats on the new parts. I'm glad to see Mike's product going to good use.

Thanks Mike, now I just can't wait for my Porterbuilt Mild Rear Dropmember to come in.
Posted via Mobile Device

raull · 04-02-2012, 01:24 PM

hellooooooo !!!! anybody building anything on this thread??? i found you at the bottom of my subscribed threads !!!!

Bennett68C10 · 04-02-2012, 10:27 PM

Lol yeah I'm still building have been working on the ever exhausting bodywork on the doors. Haven't really been taking any pictures kind of boring lol. I do have some bad news, had to cancel my order for the mild rear dropmember with Porterbuilt, Nate is awesome and very understanding. Sometimes life just reaches up and grabs you. Oh well got to do what you got to do. I will just mildly bag the rear for now with my current c-notch. Will try to get a few pics of the doors loaded up tomorrow
Posted via Mobile Device

raull · 04-02-2012, 10:58 PM

sorry to hear that bud , it happens to all of us , good days and bad days, you will get it eventually , but im sure that all subcribed to your build thread are happy with any progress you post my man ,

Bennett68C10 · 04-03-2012, 07:58 AM

Quote:

Originally Posted by raull

sorry to hear that bud , it happens to all of us , good days and bad days, you will get it eventually , but im sure that all subcribed to your build thread are happy with any progress you post my man ,

Thanks Raull, my plans now are to finish this build then worry about getting it down lower in the rear if I don't like the stance. They are never really done so I can always change things down the road

Bennett68C10 · 04-03-2012, 05:16 PM

Some pics as promised of the body work i'm currently doing on the doors. I really hate sanding

raull · 04-03-2012, 09:19 PM

now we talking , keep it up

FrankieD · 04-03-2012, 10:43 PM

lookn good

Bennett68C10 · 04-03-2012, 10:48 PM

Quote:

Originally Posted by raull

now we talking , keep it up

Thanks, the drivers door is almost ready for paint. Passenger door still needs some work.

Quote:

Originally Posted by FrankieD

lookn good

Thanks
Posted via Mobile Device

**Bowtie468** · 04-04-2012, 01:15 AM

Looking great , Keith !!! And I must agree , doors are just no fun !!!!
Posted via Mobile Device

butternut1972 · 04-04-2012, 01:25 AM

Looking great. Yep sanding blows!
Posted via Mobile Device

Bennett68C10 · 04-04-2012, 08:21 AM

Quote:

Originally Posted by Bowtie468

Looking great , Keith !!! And I must agree , doors are just no fun !!!!
Posted via Mobile Device

Quote:

Originally Posted by butternut1972

Looking great. Yep sanding blows!
Posted via Mobile Device

Thanks guys I'm finding out really how much sanding sucks and I still have the rest of the cab to do

03-06-2012, 12:38 PM	#327
FrankieD Registered User Join Date: Jan 2011 Location: Gilberts IL. Posts: 2,488	Re: Project "What was I Thinking" 68 SWB Nice work I am kind of wishing I had a short bed but I will take the long bed over dealing with rust. I am thinking about running my exhaust through the cross member too, did you have to reinforce it after you cut the holes? I am thinking about 5” holes and using 2.5” exhaust out the back. __________________ 94 k2500 EXCab Long Bed 350ci New Toy 95 K2500 Suburban New PlowTruck 454ci Support our Troops @ http://anyairman.com http://www.woundedwarriorproject.org/

03-10-2012, 09:19 AM	#330
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Got my Slosh Tubz in the other day. Really nice quality, thanks Mike. It's funny when I brought the giant box in the house my Fiance was like "Did you buy a Human" I was like no they are just my Slosh Tubz. She asked me what they were, I told her my new inner fenders. She was like what is that, I told her nevermind its parts for my truck Some Pics. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

03-10-2012, 10:23 AM	#331
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project "What was I Thinking" 68 SWB Lol, thank you !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-10-2012, 10:11 PM	#335
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Project "What was I Thinking" 68 SWB Excellent Keith!!!!!! Can't wait to see it finished Posted via Mobile Device __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

03-10-2012, 10:23 PM	#336
72blueshark Registered User Join Date: Mar 2012 Location: phoenix, az Posts: 128	Re: Project "What was I Thinking" 68 SWB very nice! i wish i could afford parts like that __________________ '72 C10 deluxe long bed, 350 auto project in the works http://67-72chevytrucks.com/vboard/s...d.php?t=513464 Now accepting donations towards the Wade needs hot rod parts fund. all applicable donators will be thanked hospitably with a 12 pack of any alcoholic beverage of their choosing

03-11-2012, 01:52 AM	#338
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "What was I Thinking" 68 SWB Congrats on the new parts. I'm glad to see Mike's product going to good use. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-02-2012, 01:24 PM	#340
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: Project "What was I Thinking" 68 SWB hellooooooo !!!! anybody building anything on this thread??? i found you at the bottom of my subscribed threads !!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

04-02-2012, 10:27 PM	#341
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Lol yeah I'm still building have been working on the ever exhausting bodywork on the doors. Haven't really been taking any pictures kind of boring lol. I do have some bad news, had to cancel my order for the mild rear dropmember with Porterbuilt, Nate is awesome and very understanding. Sometimes life just reaches up and grabs you. Oh well got to do what you got to do. I will just mildly bag the rear for now with my current c-notch. Will try to get a few pics of the doors loaded up tomorrow Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

04-02-2012, 10:58 PM	#342
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: Project "What was I Thinking" 68 SWB sorry to hear that bud , it happens to all of us , good days and bad days, you will get it eventually , but im sure that all subcribed to your build thread are happy with any progress you post my man , __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

04-03-2012, 05:16 PM	#344
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Some pics as promised of the body work i'm currently doing on the doors. I really hate sanding Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

04-03-2012, 09:19 PM	#345
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: Project "What was I Thinking" 68 SWB now we talking , keep it up __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

04-03-2012, 10:43 PM	#346
FrankieD Registered User Join Date: Jan 2011 Location: Gilberts IL. Posts: 2,488	Re: Project "What was I Thinking" 68 SWB lookn good __________________ 94 k2500 EXCab Long Bed 350ci New Toy 95 K2500 Suburban New PlowTruck 454ci Support our Troops @ http://anyairman.com http://www.woundedwarriorproject.org/

04-04-2012, 01:15 AM	#348
Bowtie468 Senior Member Join Date: Jun 2002 Location: Cecilia, Louisiana Posts: 1,638	Re: Project "What was I Thinking" 68 SWB Looking great , Keith !!! And I must agree , doors are just no fun !!!! Posted via Mobile Device __________________ Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1969 Camaro X44 LS swap 1968 C10 SWB Fleetside (SOLD) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (SOLD) 194 I6/ PowerGlide

04-04-2012, 01:25 AM	#349
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Project "What was I Thinking" 68 SWB Looking great. Yep sanding blows! Posted via Mobile Device __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.