Let's post 60-66 SUBURBAN Only Pictures

[60-66]

Pretty sure when you have base clear coat paint it will not hurt the paint, or at least it didnt here. I left it on over lunch and then spayed windex on it and it wiped off clean. Took years to get the nerve to try it and an hour to do it ???!!!

[padresag]

if you have a clear coat may be no problem but it is possible if someone is doing it over old paint it may be disastrous. try it on something first to make sure it is safe to use on what ever you are going to apply it to. I can remember the first time with caustic soda(same thing) 50 years ago ago my old boss asked to was down all the bay doors at the gas station where I worked. he said put a little caustic soda in the water. why not put a little more in. by the time I got done the paint was peeling off at the start. I have used it as a stripper, it works well to stain cherry dark but one just has to to know when to stop it (neutralize) and vinegar is the substance to use. just spray a little of that oven cleaner on a piece of cherry and watch how dark it can go
it is a chemical so just watch what you do with it. it won't hurt plastic. just be safe
ron

[60-66]

Originally Posted by padresag

if you have a clear coat may be no problem but it is possible if someone is doing it over old paint it may be disastrous. try it on something first to make sure it is safe to use on what ever you are going to apply it to. I can remember the first time with caustic soda(same thing) 50 years ago ago my old boss asked to was down all the bay doors at the gas station where I worked. he said put a little caustic soda in the water. why not put a little more in. by the time I got done the paint was peeling off at the start. I have used it as a stripper, it works well to stain cherry dark but one just has to to know when to stop it (neutralize) and vinegar is the substance to use. just spray a little of that oven cleaner on a piece of cherry and watch how dark it can go
it is a chemical so just watch what you do with it. it won't hurt plastic. just be safe
ron

I hear you Ron. I worked as an automotive Machinist for 20 + years as a Crankshaft grinder. We used caustics to remove grease and paint from engines. Couple times I got that stuff on my hands and it would burn like crazy. Now I use “easy off” if I want to detail an engine compartment, removes most the paint and all the grease, just let it sit a few days. Just don't get it on aluminum or anodized finishes.

[oem4me]

Originally Posted by 60-66

I hear you Ron. I worked as an automotive Machinist for 20 + years as a Crankshaft grinder. We used caustics to remove grease and paint from engines. Couple times I got that stuff on my hands and it would burn like crazy. Now I use “easy off” if I want to detail an engine compartment, removes most the paint and all the grease, just let it sit a few days. Just don't get it on aluminum or anodized finishes.

We are getting off on a tangent here, but what kinds of paint is it safe for? I have used it as well for stripping various paints including lacquer (takes longer) but I guess I've never tried it on catalyzed enamel, urethane, or powdercoat. I'm pretty sure the stuff would eat up any Chevrolet factory paint in about two seconds. Agree?

[DaBeast65]

Originally Posted by piratexpress1369a

i like "da beast"

Thanks!!

[Dinos63]

Originally Posted by hop sing

beautiful burb ,,very nice ,,is the steering wheel a chevelle 16 inch 2spoke? Love the center cap what combo is that set up thx hop

wow !! And a few holy cows..... Very nice

[60-66]

Originally Posted by Dinos63

wow !! And a few holy cows..... Very nice

Thanks Dino, sure enjoy your builds and threads on here also !

[Dsuper5]

http://i1305.photobucket.com/albums/...psd225885a.jpg

subsub in Page az

[Dsuper5]

Ok lets try that again.

[Dsuper5]

So I spend some time and $ on redoing the rear springs and bolts you got the pic.

[63suburby]

the new family car

[60-66]

Originally Posted by 63suburby

the new family car

Looks like a good solid one !!!! Congrats. Ever see any Panel trucks for sale down your way ?

[63suburby]

Thanks, I have only seen 1 panel (63-66 saw it in passing?)around and come to think of it no 60-66 burbs at all. Next time I am around I will stop and inquire about the panel and let you know. Funny thing is I just happened to open the newspaper one day and saw an ad for a 66 impala wagon and they mentioned a 63 burb was also for sale. and here we are go figure. Even cooler, my awesome wife was all about it.

[63suburby]

Originally Posted by 60-66

Looks like a good solid one !!!! Congrats. Ever see any Panel trucks for sale down your way ?

My neighbor does have a 65 g10 panel van, price is a bit steep, but that's the first one I have ever seen

[streetsteel]

[ATTACH]r[/ATTACH]
Posted via Mobile Device

[streetsteel]

Fresh crate 350 with 700R4.
Posted via Mobile Device

[GEEZ64]

Heres my current 1964 carry all

[GEEZ64]

65 suburban i had in 2009

[GEEZ64]

ANOTHER ONE I HAD IN 2009

[McLovin]

Here's my 66 GMC.

['66 Suburban]

Heres my 1966 GMC 1/2 ton 2wd 4 speed.

[63burban]

1963 from California CL, 292, 4 speed, 4x4, very solid

[markeb01]

I was searching the pre-divorce photos looking for an image of the 1960 Chevy Carryall (that’s what the family called it) that served as the family sedan for my ex-inlaws. This is the only photo of it I could find. It’s taken from the back seat of an immaculate original 1948 Dodge sedan. The year was 1969 and the photo was taken when I was in Vietnam.

Not much to see, other than the fact they had one. I was white over blue until my father in law painted it all white. He also had a Mack bulldog hood ornament that he couldn’t decide best placement for. So it was first mounted on the front of the hood, then the center, then the rear, and finally ended up on the roof visor over the center of the windshield! And of course none of the holes were ever filled. They just stuck up and got rusty. It also received a “pin stripe” down the side of electrical tape. About 3 days later it shrunk up and fell off, leaving a nice sticky trail behind that remained in place until he sold it some time later. It was powered by a 283/Powerglide and they drove it everywhere for years. Eventually he replaced the tailgate doors with the barn door style. That's about all I can remember of it.

[RD71]

Here are two Subs from Israel. The first, although currently in a sad state and is being restored as I write this, had served originally as an Ambulance. Being that you simply cannot find these classic service vehicles in Israel, the current owner decided upon restoration to the original spec as an Ambulance:





Here is a photo of the Sub back in its service days:



And here's the second one, just finished restoration:

[piratexpress1369a]

Originally Posted by RD71

Here are two Subs from Israel. The first, although currently in a sad state and is being restored as I write this, had served originally as an Ambulance. Being that you simply cannot find these classic service vehicles in Israel, the current owner decided upon restoration to the original spec as an Ambulance:





Here is a photo of the Sub back in its service days:



And here's the second one, just finished restoration:

cool pics