72 K20 Cheyenne Super Build

[ryanroo]

is that your garage going up Pete? trucks looks extra nice, as always.

[coopdog]

extremely impressive!!!!

[DeadheadNM]

Thanks guys!!! I really leaned a lot on the good folks here - and learned a lot. I can't say thanks enough for all the help with advice, parts, and encouragement. Hopefully I can give something back to make others builds go a little easier.

Ryan - I wish! Those are storage units a friend built this summer. My plan is to break ground in the spring for the workshop. Glad the deer didn't take you out!

[Dieselwrencher]

Man, that K20 is going to make me put on some steelies. They both look so nice, congrats.

[redbaron]

Pete,
I like all your toys. Good to see the 4x4s so loved. Your K20 makes me want to build one. Just need to get all my current projects done first.
I subscribed.
Thanks

[DeadheadNM]

Originally Posted by redbaron

Pete,
I like all your toys. Good to see the 4x4s so loved. Your K20 makes me want to build one. Just need to get all my current projects done first.
I subscribed.
Thanks

Thanks Mike! I'm eagerly following your K10 build. Stellar work sir.

['71chevy]

First and foremost, this was an awesome build and the results were even better! I don't recall reading in your thread, but how did you mount the spare in the bed? Pictures would be awesome! I am wanting to do the same for mine. Also, did you go back with a stock suspension? I love the stance of your truck. The wheel and tire combo looks good...as it sold me to go back to the steels for mine! Many thanks and great job on the build, it's got my vote!

-Chris

[DeadheadNM]

Chris, thanks! The bed I used came with an OEM side mounted tire carrier, which was an option on these trucks. They aren't too difficult to locate, a WTB on the parts board may get you one. I've attached a pic for you that shows the carrier posterior to the cover for the aux fuel neck. I did go with stock suspension. Good luck with your build. Pete

['71chevy]

Never mind about the spare...silly me didn't read everything

[89AKurt]

See why you won, love to see pictures of in-progress within a few minutes, took a ton of patience to do this right.

[ApacheIvan]

Wow Pete! Just read the entire thread. When are we going to see the truck on the same hill that you had to tow your 4Runner off

[DeadheadNM]

Lol! Thanks. I need to go back and conquer that hill. Let's go!

[LT7A]

DHNM, found your thread by searching for parkerizing. Glad I did. I'm usually over on the square side, but like these trucks a lot too. And yours is the nicest I've seen. I hope you are getting many chances to enjoy it. How is the parkerizing holding up?

[DeadheadNM]

Originally Posted by LT7A

DHNM, found your thread by searching for parkerizing. Glad I did. I'm usually over on the square side, but like these trucks a lot too. And yours is the nicest I've seen. I hope you are getting many chances to enjoy it. How is the parkerizing holding up?

Thanks for stopping by and the good words. The coating has held up well and I'm making use of the black phosphate for my current blazer build (applying all the "wish I'd have thought of that before..." moments from the k20 build lol!)

Here's an example of NOS door latches and strikers replated secondary to shelf wear: http://67-72chevytrucks.com/vboard/s...&postcount=159 The bolts are clear zinc re-plated OEM.

[402Bowtie]

Originally Posted by DeadheadNM

The cab is now undercoated with some kevlar impregnated bed liner - the bed to follow. OEM bucket seat brackets are in place. Will have paint here soon!

Pete, thanks for posting this build and your blazer build -- both are the gold standard of restoring a truck!

Do you remember which product you used for the kevlar bed liner? Would you use it for the underside of the cab if you had to do it again? Thanks - John

[DeadheadNM]

John thanks so much! I learned a lot building both. If I could only do another I might get everything right

I’ll send you a PM. Best, Pete

[Eagle9502]

Pete, nice trucks!

I have a question, can you give us more info (pics would be even better) on what you used for exhaust hangers on the passenger side? I see the forward most bracket is a 4x4 drivers side flipped around. What about the muffler and tailpipe hanger brackets?

Thanks

[DeadheadNM]

Originally Posted by Eagle9502

Pete, nice trucks!

I have a question, can you give us more info (pics would be even better) on what you used for exhaust hangers on the passenger side? I see the forward most bracket is a 4x4 drivers side flipped around. What about the muffler and tailpipe hanger brackets?

Thanks

Thanks!! The k20 still isn’t done. I’m going to add a new set of springs this summer to improve the stance and the ride.

Good question. The trucks are locked away in storage for the winter. When possible, I’ll post up some pics or shoot you a pm. I do recall that the blazer had a rubber strap muffler hanger that I believe to be oem that was affixed to a mid body crossmember held by a nut, bolt wide square washer. There were paired factory holes in this cross member on the vertical face though the factory set up made use of a single side. I think we were able to make use of the driver side hole to make it look more like a factory-style routing.

Meanwhile, here’s a thread that gives some helpful information: http://67-72chevytrucks.com/vboard/s...d.php?t=741224

Hope this helps.

[Eagle9502]

I'll check that thread out. Thanks for the link.

Post up pics of yours if you get a chance once it's out of storage.

[71CHEVYSHORTBED402]

Wow Pete, I need to read signatures more, I came across your post another thread about paint lines, and the painter (Josh) will be all over this.

You waste no time, what a beautiful build.

Question about the white paint line(s) rear of cab, in front of the bed panel.... Yeah that's pretty much it, the painter needs to know where that line is if you can help. Near I can tell by your truck that line ends before it wraps to the rear.

[DeadheadNM]

Hi Tony thanks for the good words. It was a great learning experience. I’m still tinkering with the k20. It’s got fresh Alcan leaf springs, a new OEM radiator, replaced cluster without the speed warning speedometer, NOS HD shocks, restored BE mirrors, and a NOS tailgate band. This spring I’ll add NOS door seals. OEM parts availability has really diminished since this build began.

As for the paint, the rear cab photo in post one shows a corner shot of where the white ends and that’s just around the bend to the rear. The white paint is not a continuous band across the rear of the cab. Note that the door window frames carry the white into the cab - this is seemingly specific to Flint built pickups and may not be correct for your build.

[71CHEVYSHORTBED402]

Originally Posted by DeadheadNM

Hi Tony thanks for the good words. It was a great learning experience. I’m still tinkering with the k20. It’s got fresh Alcan leaf springs, a new OEM radiator, replaced cluster without the speed warning speedometer, NOS HD shocks, restored BE mirrors, and a NOS tailgate band. This spring I’ll add NOS door seals. OEM parts availability has really diminished since this build began.

As for the paint, the rear cab photo in post one shows a corner shot of where the white ends and that’s just around the bend to the rear. The white paint is not a continuous band across the rear of the cab. Note that the door window frames carry the white into the cab - this is seemingly specific to Flint built pickups and may not be correct for your build.

You're doing that up. I tried the NOS door seal business late in the game (my early), should have seen what they sent me. Word is Wes carries quality clip on. I need a radiator too, very soon. Bunch of parts yet, pending things settle down for Wes, mostly.

Interesting paint lines vary by factory. Good enough or close Flint seems it might work for Fremont 50 years in Thanks for the lead, I missed that picture of the rear cab, looks exactly what Josh had suggested.

[IronCanine]

Just a shout out to one of the best builds ever (on this site or otherwise) coming up on its TENTH anniversary. I love this truck and have taken great inspiration from this build thread. TBH there was a time when I just had an open window on my phone to this thread for quick reference. It's a top shelf build by a top shelf guy...my gosh where have the years gone. My reflection tells me a decade has come and gone, but this truck still looks amazing.

Thanks for saving this truck Pete and sharing it with us. You're both the best!

[Ol Blue K20]

Time does fly by, I didn't realize how long it's been..

[Louisvillekytruck]

Originally Posted by Ol Blue K20

Time does fly by, I didn't realize how long it's been..

Great build