What did you do to your truck today? Chapter II - Page 140 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mud.man.rj · 03-31-2016, 09:06 PM

Not a big Toyota fan compared to old iron but like the idea, perfect powertrain that's bullet proof compared to American built and cool old style Gm body, thumbs up, hope it all works out. I like different projects that take a thinker to build.

Mator · 04-01-2016, 07:57 AM

Well one more task down. Got the new seat covers installed. Thanks to Rick's Custom Upholstery. Came out really nice.

Possmguts · 04-01-2016, 09:27 PM

Quote:

Originally Posted by Mator

Well one more task down. Got the new seat covers installed. Thanks to Rick's Custom Upholstery. Came out really nice.

Nice!.. How do you like the one piece windows? I'm struggling with buying a kit from a guy that didn't use it...

68 Chevyota · 04-02-2016, 12:59 PM

Quote:

Originally Posted by kilrcady

buy American

I did! Both of them built right here in our States!
And thank you Don "Ole dollar", I'll post pics soon!

Possmguts · 04-02-2016, 11:02 PM

Got started on the patching of the front of the hood today... hope to get the rest of the metal work done tomorrow and get started on the finish work. About tired of screwing with this hood...

c10ss69 · 04-02-2016, 11:21 PM

I was able to get some metal on the truck today, doors, inner fenders, fenders and grill along with a few trim pieces.

**71CHEVYSHORTBED402** · 04-03-2016, 12:16 AM

Pulling wire mode today. Next up is score some hose line to see if the windshield washer system works. I'd like to see what I've got before I remove the LH dash panel components. Since I've owned this (1989) its never been hooked up, including a missing bottle. But it makes noise when I trigger it. I noticed the jets might be a bit clogged, could be why they disconnected. Will find out soon enough. 70/30 it works.

All new to me...........This is pretty cool. I've managed to avoid the windows and door latches so far (ha!). But I'll soon run out of parts to remove as I keep her running. Speak of, safe to assume I can remove the entire emergency brake system and still have brakes? Believe it or not, I've never even done a brake job outside a master cylinder and bleeding brakes...........Meanwhile, I'm taking this down to nuts and bolts.

66clow · 04-03-2016, 01:12 AM

Got the bumper on today, she's smiling.

**71CHEVYSHORTBED402** · 04-03-2016, 01:27 AM

Looks perfect. Let me know if I'm off base, but it seems the best way is to mount the inside of the bumper first, snug, not tight............line up the outer brackets, then tighten it all down.

Have to admit I butchered my rear bumper along time ago. Something wasn't right. When I tightened it down the brackets bent the bumper in places (whoops). Can't/won't happen again. I figure the brackets weren't positioned right.

66clow · 04-03-2016, 01:40 AM

Quote:

Originally Posted by 71CHEVYSHORTBED402

Looks perfect. Let me know if I'm off base, but it seems the best way is to mount the inside of the bumper first, snug, not tight............line up the outer brackets, then tighten it all down.

Have to admit I butchered my rear bumper along time ago. Something wasn't right. When I tightened it down the brackets bent the bumper in places (whoops). Can't/won't happen again. I figure the brackets weren't positioned right.

I mounted the small brackets first on the frame ends and then the bumper to those. Then the outer brackets. Everything loosely until I had all the bolts in.had to trim the left bracket due to the power steering box.

**71CHEVYSHORTBED402** · 04-03-2016, 02:06 AM

Quote:

Originally Posted by 66clow

I mounted the small brackets first on the frame ends and then the bumper to those. Then the outer brackets. Everything loosely until I had all the bolts in.had to trim the left bracket due to the power steering box.

Thanks for the info. Looks great.

djeCST · 04-03-2016, 08:06 PM

Got my dash painted today. Now I can install it and start on the wiring, which is what I was planning on doing before I realized the dash needed to be replaced. One step forward.....

CST10 · 04-03-2016, 09:12 PM

Installed a new adjustable vacuum advance and set the timing on the 462CI BB in ol Samson today.

**71CHEVYSHORTBED402** · 04-03-2016, 09:20 PM

Well, I'm currently in "ID that wire" mode for under the hood. Honestly, those who altered some things did a sloppy job, so I'm rebutting a few lines so they route correctly, even though its all going to be pulled and replaced. I'll have plenty good questions about what's correct Vs what's wrong................Will save that until after I ID what goes to what and where.

On a side note, the more "exposure" the more I realize there's really not much to the wiring. At least not on these trucks. That said, I haven't dove into the LH dash panel yet.

Possmguts · 04-03-2016, 10:03 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

Well, I'm currently in "ID that wire" mode for under the hood. Honestly, those who altered some things did a sloppy job, so I'm rebutting a few lines so they route correctly, even though its all going to be pulled and replaced. I'll have plenty good questions about what's correct Vs what's wrong................Will save that until after I ID what goes to what and where.

On a side note, the more "exposure" the more I realize there's really not much to the wiring. At least not on these trucks. That said, I haven't dove into the LH dash panel yet.

They are pretty straight forward and simple for the most part... I look under the hoods of new cars and trucks and run away in fear...

But I say its simple before I get to that point myself... Im sure there will be even less hair on my head when it all done...

AKC · 04-03-2016, 10:27 PM

New door seals...

OregonNed · 04-03-2016, 11:02 PM

More progress completed on the wood for the bed today. Routing and final sanding done - ready to apply the stain. Going for a reddish brown final color.

toolboxchev · 04-03-2016, 11:07 PM

Took it catching today, released a 18lb spring chinook native and released.

46 years and still working the pasture over.

Mator · 04-04-2016, 07:55 AM

Quote:

Originally Posted by Possmguts

Nice!.. How do you like the one piece windows? I'm struggling with buying a kit from a guy that didn't use it...

I like it. I haven't had any problems besides forgetting to glues the seal in. My wind wings were rusted out and the one piece window kit cost me less then buying a new set of wings so I saved money in the long run. And I can always switch back if needed. Thanks

68 Stepper · 04-05-2016, 12:51 AM

Attempted to start my new engine, leaked gass all over the garage floor, will try again tomorrow!

Bomp · 04-05-2016, 01:00 AM

Hauled some parts home.

Getting ready to dive in on some fender repair.

ksshane · 04-05-2016, 07:27 AM

replaced the rubber grommet around my gas tank filler tube. Not near as bad as I thought it was going to be

snipescastle2 · 04-05-2016, 08:46 AM

Quote:

Originally Posted by djeCST

Got my dash painted today. Now I can install it and start on the wiring, which is what I was planning on doing before I realized the dash needed to be replaced. One step forward.....

How are you attaching your dash asides from the three bolts on either side, I assume you have left a portion of the sheet metal bare to "spot weld" it to the cowl section... Surprised you didn't paint that in the cab.
Have a good one,
Ben

OregonNed · 04-05-2016, 02:20 PM

Minor upgrade last night. Lost the rusty chrome cover and installed this stock restore. New gear oil and found out I have 3:08 gearing

tlman · 04-05-2016, 04:15 PM

doors fitted waiting for the good fenders and hood

03-31-2016, 09:06 PM	#3476
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today? Chapter II Not a big Toyota fan compared to old iron but like the idea, perfect powertrain that's bullet proof compared to American built and cool old style Gm body, thumbs up, hope it all works out. I like different projects that take a thinker to build. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

04-01-2016, 07:57 AM	#3477
Mator Registered User Join Date: Jan 2013 Location: Clinton Iowa Posts: 337	Re: What did you do to your truck today? Chapter II Well one more task down. Got the new seat covers installed. Thanks to Rick's Custom Upholstery. Came out really nice. Attached Images __________________ Build sheet http://67-72chevytrucks.com/vboard/s....php?p=7277491

04-02-2016, 11:02 PM	#3480
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: What did you do to your truck today? Chapter II Got started on the patching of the front of the hood today... hope to get the rest of the metal work done tomorrow and get started on the finish work. About tired of screwing with this hood... Attached Images __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

04-02-2016, 11:21 PM	#3481
c10ss69 Registered User Join Date: Jun 2007 Location: Hayden Alabama Posts: 159	Re: What did you do to your truck today? Chapter II I was able to get some metal on the truck today, doors, inner fenders, fenders and grill along with a few trim pieces. Attached Images

04-03-2016, 12:16 AM	#3482
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,300	Re: What did you do to your truck today? Chapter II Pulling wire mode today. Next up is score some hose line to see if the windshield washer system works. I'd like to see what I've got before I remove the LH dash panel components. Since I've owned this (1989) its never been hooked up, including a missing bottle. But it makes noise when I trigger it. I noticed the jets might be a bit clogged, could be why they disconnected. Will find out soon enough. 70/30 it works. All new to me...........This is pretty cool. I've managed to avoid the windows and door latches so far (ha!). But I'll soon run out of parts to remove as I keep her running. Speak of, safe to assume I can remove the entire emergency brake system and still have brakes? Believe it or not, I've never even done a brake job outside a master cylinder and bleeding brakes...........Meanwhile, I'm taking this down to nuts and bolts. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-03-2016, 01:12 AM	#3483
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today? Chapter II Got the bumper on today, she's smiling.

04-03-2016, 01:27 AM	#3484
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,300	Re: What did you do to your truck today? Chapter II Looks perfect. Let me know if I'm off base, but it seems the best way is to mount the inside of the bumper first, snug, not tight............line up the outer brackets, then tighten it all down. Have to admit I butchered my rear bumper along time ago. Something wasn't right. When I tightened it down the brackets bent the bumper in places (whoops). Can't/won't happen again. I figure the brackets weren't positioned right. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 04-03-2016 at 01:35 AM.

04-03-2016, 08:06 PM	#3487
djeCST Registered User Join Date: Jan 2016 Location: San Jose, CA Posts: 68	Re: What did you do to your truck today? Chapter II Got my dash painted today. Now I can install it and start on the wiring, which is what I was planning on doing before I realized the dash needed to be replaced. One step forward..... __________________ Dennis '70 CST/10 '55 Bel Air wagon

04-03-2016, 09:12 PM	#3488
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: What did you do to your truck today? Chapter II Installed a new adjustable vacuum advance and set the timing on the 462CI BB in ol Samson today. Attached Images __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

04-03-2016, 09:20 PM	#3489
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,300	Re: What did you do to your truck today? Chapter II Well, I'm currently in "ID that wire" mode for under the hood. Honestly, those who altered some things did a sloppy job, so I'm rebutting a few lines so they route correctly, even though its all going to be pulled and replaced. I'll have plenty good questions about what's correct Vs what's wrong................Will save that until after I ID what goes to what and where. On a side note, the more "exposure" the more I realize there's really not much to the wiring. At least not on these trucks. That said, I haven't dove into the LH dash panel yet. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-03-2016, 10:27 PM	#3491
AKC Registered User Join Date: Feb 2016 Location: Camarillo, CA Posts: 256	Re: What did you do to your truck today? Chapter II New door seals... __________________ 'Anela - AKC's 1968 C30 1T Flattie "Trouble Rides A Fast Horse..."

04-03-2016, 11:02 PM	#3492
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today? Chapter II More progress completed on the wood for the bed today. Routing and final sanding done - ready to apply the stain. Going for a reddish brown final color. Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

04-03-2016, 11:07 PM	#3493
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: What did you do to your truck today? Chapter II Took it catching today, released a 18lb spring chinook native and released. 46 years and still working the pasture over.

04-05-2016, 12:51 AM	#3495
68 Stepper Registered User Join Date: Jul 2014 Location: Richland Washington Posts: 127	Re: What did you do to your truck today? Chapter II Attempted to start my new engine, leaked gass all over the garage floor, will try again tomorrow!

04-05-2016, 01:00 AM	#3496
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: What did you do to your truck today? Chapter II Hauled some parts home. Getting ready to dive in on some fender repair.



Register or Log In To remove these advertisements.

04-05-2016, 07:27 AM	#3497
ksshane Registered User Join Date: Jul 2013 Location: Wichita Ks Posts: 495	Re: What did you do to your truck today? Chapter II replaced the rubber grommet around my gas tank filler tube. Not near as bad as I thought it was going to be __________________ 71 swb 350/4sp manual 5/7 static drop

04-05-2016, 02:20 PM	#3499
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today? Chapter II Minor upgrade last night. Lost the rusty chrome cover and installed this stock restore. New gear oil and found out I have 3:08 gearing Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

04-05-2016, 04:15 PM	#3500
tlman Registered User Join Date: May 2014 Location: rodney ,ontario canada Posts: 111	Re: What did you do to your truck today? Chapter II doors fitted waiting for the good fenders and hood Attached Images

Register or Log In To remove these advertisements.