Post Your Craigslist Finds Part 2

[iriereggaeman]

Interesting this was posted in the Miami/Dade Craigslist area of Florida. The pictures did NOT look like south FL! The map location in the ad seems to indicate Baltimore. Nice truck!

[Wikid61]

https://sandiego.craigslist.org/nsd/...679357118.html every nut and bolt new. 408 Stroker 6.0 Approx 550 HP.
-Decked/Line Bored .030
-Eagle Stroker Crank
-Eagle H Beam Rods
-Mahle Pistons
-LS7 Lifters
-Comp Cams Trunion Kit
-BTR Stage 4 LS3 Cam
-BTR Platinum .660 Spring Kit
-Dual 92mm Throttle Bodies
-3 inch Stainless Dual Exhaust

-Holley HP ECU
-Built TH350 and NP208.
-Axles just serviced with new 4:10 gears and Yukon locker installed.
-4 wheel disc brakes.
-Dirty Dingo crossmember and engine mounts
-Dakota digital dash
-Vintage Air
-Custom Interior
-Powder Coated Frame
-35x12.5 Toyo Open Country on 17x9 Chrome Fuel Maverick wheels.
-4 inch lift.
Needs a few detail items finished up but have other projects I need to finish. I don’t care what you think it’s worth. Serious buyers feel free to contact me with serious offers. Price is firm unless you come see it in person.
C10, K10, K20, K5, Jimmy

[Wikid61]

https://kalispell.craigslist.org/cto...680082236.html 1971 Chevy C20 custom deluxe A/C truck everything works wipers radio horn cigarette lighter it’s got a 350 engine runs drives great I really like the truck but i could use the cash at the moment I have original owners manual card board still in glove box an still over the tank odometer shows 20,600 miles not to sure if it’s been rolled over I’m interested in trades for another 3/4 truck 4x4 or 10,000 obo shoot me an offer worst I can say is no

[Wikid61]

1969 Chevrolet K10
No rust
No motor
Manual Transmission, 205 transfer
Clean AZ title

SELL OR TRADE 69-72 k5 https://seattle.craigslist.org/est/c...671813360.html

[Wikid61]

1971 Chevrolet C10 factory short bed.
Has always been in Arizona. No rust, very solid.

5.3 / 4L60E
The motor and trans came out of my dads personal truck. Had 150k miles.
Still needs wired.
Needs fuel lines made.
Drive line needs modified. https://phoenix.craigslist.org/evl/c...680770651.html

[Wikid61]

C-10 CST HIGHLY OPTIONED FACTORY 402 BIG BLOCK. FACTORY A/C (ICE COLD) BUCKET SEATS,CENTER CONSOLE,TILT STEERING,POWER WINDOWS,POWER STEERING,POWER DISC BRAKES,TACH AND GAUGES,TURBO 400, WITH GEAR VENDOR OVERDRIVE UNIT. POSI TRACTION 330 REAR END.
1 OF ROUGHLY 325 WITH THIS OPTION PACKAGE.TRUCK WAS TOTALLY RESTORED ABOUT 5 YEARS AGO AND VERY WELL TAKEN CARE OF SINCE. PAINT JOB IS INCREDIBLE,GREAT GAPS,DOORS, FENDERS,HOOD. UNDER HOOD IS VERY CLEAN AND DETAILED. UNDER CARRIAGE IS SUPER CLEAN. INTERIOR IS IN PERFECT CONDITION
TRUCK HAS EDELBROCK INTAKE, EDELBROCK ALUMINUM HEADS,FI-TECH FUEL INJECTION,
ELECTRIC FAN,AND WILWOOD MASTER CYLINDER. FACTORY EXHAUST MANIFOLDS. BED IS BEAUTIFUL NOT A SCRATCH. NEWER TOYO TIRES W/ CHROME RALLY STYLE RIMS. RUNS AND DRIVES VERY NICE.
ALSO HAS BLUETOOTH STEREO SYSTEM.EVERYTHING WORKS AS IT SHOULD.DO NOT NEED HELP SELLING. CALLS ONLY/ https://losangeles.craigslist.org/sf...680425398.html

[Wikid61]

https://kansascity.craigslist.org/ct...680747481.html 1972 Chevrolet C10 cold ac. 350 auto. Runs drives excellent ps pb - $9,000 (Pleasant hill MO)

[Wikid61]

https://sandiego.craigslist.org/nsd/...681466883.html 1971 Chevy C10 - $50,000 Posted about 15 hours ago 71 C10 list of items it has ridtech coil over front suspension rack and pinion steering willwood 6 piston front breaks 4 piston rear breaks has 3.73 gears with Pawsey traction rear end rebuilt, hounds tooth interior Dakota, digital gauges all new wiring and it has a 6.2L 376 LS3 525hp out of box built by turn key and has a 4l70E transmission Davis racing Radiator great truck asking $50,000 OBO

[Wikid61]

https://lasvegas.craigslist.org/cto/...681346150.html I have this1972 Chevrolet C10 step side original short bed project truck for sale I have to many projects going at ones selling this one for now as is just seating on my driveway, asking $10,000 OBO

Everything you see on this truck is original no parts are being replace or any buddy work being done at all pure original truck.
Is a project truck and needs some minor body work
My goal was to do a LS4 swap just like my other projects. I have the title on hand let me know if you have any questions

if you need the truck to be ship we can work something i have several logistics company's i use and will be drop off to your place.

[Wikid61]

https://vancouver.craigslist.org/pml...679018830.html 1967 GMC C10 Tubbed Longbox project
Strong 350, 4spd, headers, dual exhaust,
resto started just no time to finish drive it home
$4500 NO TRADES

[Wikid61]

https://seattle.craigslist.org/sno/c...678753458.html I have a 1972 Chevy c20 long bed with the 5 lug hub conversion,has 3/4 ton driveline.
Radio works,has aux cable
New battery
New spark plugs
Oil changed recently
Transmission fluid also changed and added a deep pan for cooling
Spooled in the rear
Newer carrier bearing
SBC 350 crate motor
Stainless steel long tube headers, exits behind cab as of right now will need exhaust finished I’m just too big to fit under there.
Edelbrock 600 carburetor
Nice sounding cam
Turbo 400 transmission, newer shift linkage
Disc front brakes
3” drop spindles up front, 2” drop springs in rear with 1” blocks, truck is C notched and rides pretty smooth for how low it is.
Interior is clean, I just put the seat cover on to protect the original.
New front grille
Nice American racing wheels, will need tires eventually.

Truck runs and drives great, it’s not perfect but definitely a good start to an awesome project.

It does have rust and paint is not perfect, there is a dent on passenger side bed panel nothing to major.

Previous owner hooked me up with all new weather stripping for the entire truck. I also have a set of valve covers I was going to put on. New 90 degree spark plug wires for the headers. Also a new rocker panel for driver side.

I would love to keep it but I just don’t have the time to build it anymore and would like to see someone else enjoy it.

10000 obo or possible trade for utv

Let me know what you got

Thanks
do NOT contact me with unsolicited

[Wikid61]

https://longisland.craigslist.org/ct...681419210.html 1971 Chevy C10 Longbed. Great running truck. Looks pretty good. Paint worn in spots. Solid metal except for a few little bubbles on the door skins. 3spd on the column 307CU. Owned since 2017. Added: Seat/shoulder belts. Vintage stereo w/ small subwoofer under seat. Seat covers- real replacement w/new foam. New carpet. Added PS/PB, new tires, new 15 inch powder coated rims and hubcaps, tonneau cover, exhaust, headlights, front chevy emblem. I love this truck but I'm moving and won't have a garage until it is built next year. And I need money to build the garage. I would have cleaned it up better but just had surgery. Please text. Local pickup, cash. No wiring money scammer BS.

[Wikid61]

https://washingtondc.craigslist.org/...680544362.html Odometer: 41557.4
Maximum GVW: 5,000 lbs
V. I. N.: CS149T818937
Motor: 402 Bog Block from !1972 C20 Camper Special w/turbo
Transmission: 400
Included are a looooot of new and used parts!!!!! I will list a few but please feel free to inquire for a a complete list.

Period correct 327 small block
Rebuilt double hump heads
202 191 valves bored over 60
Turbo 400 transmission.

Serious inquiries only PLEASE...

[Wikid61]

1967 Chevrolet C10 Step Side Pickup. Only 67,000 miles (Mileage On Pennsylvania Title). Starts Right Up and Runs and Drives Good! Have Original Owners Manual, Still Has The Service Part ID Label In The Glove Box.
This is The First Year of the 2nd Generation C10s. The Only Year That It Came With The Small Rear Window. This Truck is Very Rare, Not Only Being A Step Side Versus The Fleet Side But Very Few Came With The Side Mounted Spare Tire. Not To Mention Most Manuals Came Three On The Column (Tree) This Is A Four On The Floor with First Gear Being A Granny Gear. To The Best of My Knowledge It Still Has The Original 283 V8 Motor. All Dash Lights and Gauges Work and Functional.
Good Solid Body! Good Floors and a Spotless Frame. It's Had Some Customization/Modifications Over The Years and Has Been Repainted The Same Color As Factory (Vermillion Metallic) About 20 Years Ago Or So. The Fuel Tank Has Been Relocated From Behind The Drivers Seat To A Compartment In The Bed. Custom Side Dual Exhaust, Cooper Tires Like New.
This Truck Came From The Factory With No AC or Power Steering. Also Still Has The Factory Wooden Bed Which Has Been Covered By A Piece of Plywood.
This Is Not A Show Truck! It Has Minor Paint Blemishes and Minor Rust Spots Here And There, Just Surface Rust, No Holes!
These Trucks Demand BIG Money When Fully Restored Upward of $30 to 50k, See The Last Pictures I Have.
Clean and Clear Title In Hand Ready To Sell!
Absolutely NO Joyrides, Show Me The Cash and We'll Go For A Ride!
This Truck Is Priced To Sell! You Will Not Find Another Like It For Anywhere Near My Price.
Call Me If You're Interested, No Texts, I Will Not Respond To Them.
$10,000. Cash!! FIRM!!
Not A Penny Less!
Serious Buyers Only Please.
I'm Not Looking For Any Type Of Trades!
724 six one zero 0629
show contact info
do NOT contact me with unsolicited https://pittsburgh.craigslist.org/ct...679889971.html

[Wikid61]

https://dallas.craigslist.org/dal/ct...679707915.html 72 chevy C10 Custom Deluxe with PS, PB,(Disc in Front), PW, Tilt wheel, 355CID Blue Print motor dyno tested at 415hp
with all paperwork from summit racing. this is a factory AC truck with all new ac parts just needs new hoses made adapting from old system to new compressor. Motor has a Holley Sniper fuel injection, ceramic headers, hi torque starter, New duel exhaust, Electric fans controlled by Sniper kit. TH350 trans, and a Car Toys installed alarm.

[Wikid61]

https://columbus.craigslist.org/cto/...677849771.html Almost too many mods to list here.
Originally a long bed truck, I cut the frame down with a Brothers Trucks kit, and cut the bedsides down myself as well. Frame was welded and bolted back together. All the parts listed below are new beginning with Winter of 2021, with many parts (alternator, power steering pump/box/hoses, seats, tires, wheels, steering column, ignition switch, steering wheel) new as of Summer 2023.

Interior:
Custom bucket seats with center console/jump seat from a 2015 Silverado.
New Silver Sport Transmissions Tremec 5 speed manual transmission with hydraulic clutch, installed by Procar Associates in Akron in March 2022.
AirLift Performance air ride management system.
Brown carpet.
Chrome Holley steering column with tilt.
Ignition switch.
Lokar aluminum pedals.
Dakota Digital gauges, WORKING fuel gauge, clock, tach (truck didn't originally come with clock).
Lokar door/window handles.
Earlier model C10 arm rests.
Comfort Grip steering wheel.
New windshield.

Engine/under hood:
Holley Sniper fuel injection on the 355 small block Chevy engine, Hedman ceramic shorty headers (needed to keep the exhaust tucked in the frame rails).
Billet valve covers with script Chevy.
HEI distributor (came on the truck)
Body color air cleaner cover
LEEDS chrome master cylinder
Powermaster 150 amp alternator.
Power steering pump, box, hoses.
Optima Yellow Top battery.

Suspension/brakes
POL tubular upper control arms.
Cupped factory lower control arms.
Porterbuilt Fab step notch in the rear.
Firestone bags.
QA-1 shocks.
Wilwood modular front spindles and Wilwood 6 piston brakes all around with drilled/slotted rotors.
Detroit Steel Wheels 20" D-Town smoothie wheels with chrome center caps and stainless steel trim rings.
Converted to five-lug wheels.
Lock-Rite rear locker.
All new tie rod ends, drag link.
Custom two-piece driveshaft made by Heavy Duty Truck Parts in Newark.

Body:
New passenger side door (new glass, ALL internals, vent window).
Boyd Welding gas tank under the bed floor (I left the original fuel neck on the cab for the look), with Aeromotive in tank pump.
New grill.
LED sequential rear turn signals/tail lights and front turn signals.
Billet aluminum hood hinges.
Custom extruded aluminum raised bed floor with widened tubs.
I repainted it Winter of 2022/2023 to the factory Teal. The cab roof is original, and patina on the hood is real, I "recreated" the patina on the bed and fenders/doors.
I built the entire exhaust system myself, as you can see it exits on the sides in front of the rear tires. Due to space "restrictions" under this thing it's running cherry-bomb mufflers.

There are things not done yet (it needs a new cab wiring harness, rusty floor braces underneath, I have a new driver side floor pan, engine could use cleaned up but I never got around to tearing it down to clean/repaint it.) The casting numbers tell me it's a 1969 engine, no way to tell if it's original to the truck but I'm guessing it is. With the air ride it rides smooth as glass. Doesn't have heat or AC, doesn't get driven in the winter and it's got two windows and the vents are AC. It lays frame out back, and "almost" does up front, anybody that knows these things knows the front crossmember hangs lower than the frame rails, it's as low as it can go without putting in an aftermarket front crossmember.

No tire kickers or joy riders, if you aren't serious don't bother. I'm sure there are things I'm forgetting. If ad is up it's available. Don't need help selling. Clean/clear title in my name. $25,000 OBO
Seven four 0, nine seven 5, 1 3 five seven.

TO "LAWRENCE" THE SCAMMER FROM INDY WITH THE MARYLAND PHONE NUMBER, SORRY I CALLED YOUR BLUFF AND ENDED YOUR SCAM BEFORE IT GOT STARTED LOSER!

[Wikid61]

https://houston.craigslist.org/cto/d...680745971.html The full restoration was just completed on this well-preserved 53-year-old truck. The work was aimed to preserve as many original components as possible, including that amazing patina.

Some components were restored, others replaced, and a few upgrades were added to enhance its appearance, comfort, and performance! Fairly priced for a quick cash sale.

[Wikid61]

https://houston.craigslist.org/cto/d...680412311.html 70 C10 short bed, 350 automatic, A/C, fiberglass bed cover, 6 lug rally wheels with beauty rings , drum brakes, power steering and brakes, P295/50/R15 new tires, susp. lower kit , edelbrock intake and carb, dual, headers, dual exhaust, runs and drives good. Asking $16500. Cash no trades.

[Wikid61]

https://denver.craigslist.org/cto/d/...681801714.html Real short bed
Th 400
Double hump heads ( no accessory holes )
Block # say it’s a 1980 305ci
Number 3 cylinder has 0 compression
But starts right up to move around
Usual rust spots
8 inch rally’s
Clean Colorado title in my name
$6000 or best offer

[Wikid61]

https://sanangelo.craigslist.org/cto...681061815.html Show ready! Completely finished in gloss black! This 1967 GMC pick up has A/C and it's LOADED with many upgrades. Body is solid and Lazer straight, Completely finished in gloss black with clear coat. Under hood, bed (includes cover) and frame were also painted. New chrome and trim all around. Upgraded 1969 GMC 350 V8 motor with less than 10k miles and Original Turbo 400 auto. trans. New Holly QFT 4bbl carb. New retro air cleaner, New steel fender wells and New core support, (all painted to match) also new finned valve covers, billet pcv valve, accel coil, dist, mallory wires, fan, radiator, hoses, belts, etc. Suspension was lowered, added new shocks, new dual exhaust system, new Cooper Cobra tires and new chrome ralley wheels. *Additional Upgrades include power windows, remote door locks and a keyed kill switch. Also has a complete 4 wheel disc brake system. Over $40k invested and done up right! Yes! Very Clean inside and out! Black 2003 Harley fits in the bed perfectly! Sold separately or ask about pkg deal. Video available! Serious inquiries only! Thanks for the compliments! No emails! Contact by cell # show contact info thx Les.

[Wikid61]

https://chicago.craigslist.org/nch/c...679293341.html 1967 chevy pickup c-10 All original except paint. 82421 original miles. Only year with small rear window. Great shape & comes with many new parts. 283 engine, power steering, power brakes. Just needs new paint job.Check pictures. $14000 or best offer. Please E-Mail or send Text to

[Wikid61]

https://prescott.craigslist.org/cto/...674002189.html 1967 Chevrolet Utility bed pickup
Short wheel base/short bed
V8 - 3 speed manual transmission
New master cylinder
New drum brakes all around
Wing windows
This original truck could use a little TLC
Truck is from California **does have rust**
$5500

[Wikid61]

https://denver.craigslist.org/cto/d/...673617301.html 4x4 454 3/4 ton 4 speed new motor , new tires ,old suburban wy school bus.

[Wikid61]

https://dallas.craigslist.org/dal/ct...672350913.html I have a 1972 GMC pickup for sale. It is a one owner truck with a clear title. It has a little bit of rust not bad the engine still runs and drives but needs to be rebuilt. The truck is complete and all original. It can be driven onto a trailer to be tolled away. It has a inline 6 engine and 3 on the tree manual transmission. It is a long wheel base but these 72 long wheelbase pickups are getting very popular now. I'm asking $6,500 or best offer for the 72. I also have a 1964 C10 pickup short wheel base Stepside no motor no transmission for sale. Both of these trucks have clear titles. I'm asking $3,950 or best offer for the 64. If interested make me a reasonable offer and I'll respond ASAP. Otherwise thanks for looking and God bless.
"OR TRADE FOR SIDE BY SIDE"

[Wikid61]

https://phoenix.craigslist.org/wvl/c...681784988.html 1968 gmc pickup,new windshield,new brakes,packed wheel bearings,new rims ,new front tires,new lug nuts and caps,new timing chain and gears,new rebuilt carb,new fuel pump,new fuel tank,new clutch and pressure plate throw out bearing pilot bearing ,new fluids in everything ,new mirrors,new speed cable,seat new upholstery,new muffler.