How about some pics of 73-91 crew cabs - Page 147 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DetroitDan · 04-15-2012, 07:01 AM

hey v30crewcab, I NEED more information on those wheel spacers! I've got a cab & chassis dually pickup too, and I'm torn between running dual wheels with little weenie tires, and fitting some big tires under it. I am almost at the point of swapping the rear axle out of it.

v30crewcab · 04-15-2012, 07:39 AM

I think they are 3.5" thick ones. I will try to get a measurement on them today. I am getting an 03 disk brake rear this coming week to run, so I'm not gonna use them anymore. I don't run the duals on it anymore and I want factory disk.

v30crewcab · 04-15-2012, 07:41 AM

So, did all the crewcabs have the chrome trim above the doors, or did some come without it? I'm thinking of removing mine and welding up the holes when I repaint it here soon. whatcha think?

Da88burban · 04-16-2012, 02:36 PM

Quote:

Originally Posted by v30crewcab

So, did all the crewcabs have the chrome trim above the doors, or did some come without it? I'm thinking of removing mine and welding up the holes when I repaint it here soon. whatcha think?

It looks good with the drip rails shaved but they are their for a reason. I removed them from my burb to see how it was. When it rained hard the water would poor straight down on me and soaked me when I opened the door. I have also heard if your seals are worn out it will leak when the doors are closed too. I would not advise anyone that is in a area that rains a lot to remove them.

v30crewcab · 04-16-2012, 04:27 PM

Quote:

Originally Posted by Da88burban

It looks good with the drip rails shaved but they are their for a reason. I removed them from my burb to see how it was. When it rained hard the water would poor straight down on me and soaked me when I opened the door. I have also heard if your seals are worn out it will leak when the doors are closed too. I would not advise anyone that is in a area that rains a lot to remove them.

I was afraid of that. maybe I will just remove the stainless trim part and paint them the same color as the truck.

**Dieselwrencher** · 04-15-2012, 11:04 AM

Eric28miller, sweet build! Did you put an aftermarket cam in your engine or is it a stock one? Very nice work!

justpball · 04-16-2012, 06:53 AM

I think all of them had the chrome drip rails....
Posted via Mobile Device

72longhornTX · 04-16-2012, 04:07 PM

http://www.tndieselpower.com/site/
They have one of the best crossmembers I have seen to swap the Cummins into these truck. I have one waiting to go into my truck when I get back.

rambone86 · 04-16-2012, 04:27 PM

Hey 72longhornTX, are you going to swap your 454? I just got the truck yesterday, filled the tank, went to work and I'm half empty. Damn, didn't think they were that thirsty. I need to do the swap asap as this is going to be my daily driver.

*nekkidhillbilly* · 04-18-2012, 08:25 PM

im sure it was different jeff but its not my cup of tea either

Devillusion · 04-18-2012, 08:30 PM

If it were lowered and tucked the rear tires a bit, I think it would be sweet. I like it....different. I have the same C+C rear 14 in mine as well. With some slight adjustments on the rear fenders they would tuck no problem. Want to see pictures as it comes along....

trout · 04-18-2012, 08:58 PM

that's awesome i love step sides (on the 70s) trucks can you get pics of the inside of the bed i got one not to long ago and al it is is a shell no floor and only 3 cross member that are welded n

The Liberace · 04-18-2012, 11:20 PM

I kinda posted my car pics up to show I have enough crap that's lowered. I look forward to something I don't have to lay down to get in. The truck is meant to be my car hauler and is a budget build. I like the fact that not everybody dose the step side, Its beefy and sexy at the same time , like me. Right Jeff!

**1774btcrew** · 04-18-2012, 11:26 PM

Quote:

Originally Posted by The Liberace

I kinda posted my car pics up to show I have enough crap that's lowered. I look forward to something I don't have to lay down to get in. The truck is meant to be my car hauler and is a budget build. I like the fact that not everybody dose the step side, Its beefy and sexy at the same time , like me. Right Jeff!

)
I think the nice word is HUSKY!
Posted via Mobile Device

Dinos63 · 04-19-2012, 12:36 AM

craig i like it

welcome to the forum

The Liberace · 04-19-2012, 11:55 AM

Quote:

Originally Posted by 1774btcrew

)
I think the nice word is HUSKY!
Posted via Mobile Device

You talking about me or the truck? lol

rambone86 · 04-19-2012, 11:07 PM

I just ordered the crossmember for a 89-93 12v swap. What transmission should I be looking to install? It's going to be my daily driver and used to tow my boat, not much more than that.

JPalmer81 · 04-19-2012, 11:09 PM

Nv4500

**Dieselwrencher** · 04-19-2012, 11:51 PM

Quote:

Originally Posted by rambone86

I just ordered the crossmember for a 89-93 12v swap. What transmission should I be looking to install? It's going to be my daily driver and used to tow my boat, not much more than that.

Do you want auto or manual?

rambone86 · 04-20-2012, 01:40 PM

[QUOTE=Dieselwrencher;5325151]Do you want auto or manual?[/QUOTE

I want an automatic. My mechanic wants to make this swap as simple as possible, he doesn't want to get into critical wiring, this being his first diesel swap. I'm overhelmed with all the info on these swap sights.

STOCKISH · 04-20-2012, 02:10 PM

A518 auto from an early 90s Cummins truck.

**Dieselwrencher** · 04-20-2012, 02:11 PM

Quote:

Originally Posted by rambone86

I want an automatic. My mechanic wants to make this swap as simple as possible, he doesn't want to get into critical wiring, this being his first diesel swap. I'm overhelmed with all the info on these swap sights.

47rh from a 1994 or 1995 dodge cummins is the way to go then. If you or your mechanic need info or help let me know and I'll help you out.

rambone86 · 04-20-2012, 02:18 PM

thanks for the info guys. gonna start craiglisting for parts.

*Stew_Magoo* · 04-21-2012, 10:25 PM

Got my 19.5's mounted today, did some more work but not done with this weekends list of projects on the rig. More picks tomorrow when i get some more done!

JPalmer81 · 04-21-2012, 10:59 PM

Not sure i'm feeling the 19.5's, but whatever floats ur boat, more power to ya!

04-15-2012, 07:01 AM	#1
DetroitDan Registered User Join Date: Dec 2009 Location: Epping, NH Posts: 605	Re: How about some pics of 73-91 crew cabs hey v30crewcab, I NEED more information on those wheel spacers! I've got a cab & chassis dually pickup too, and I'm torn between running dual wheels with little weenie tires, and fitting some big tires under it. I am almost at the point of swapping the rear axle out of it. __________________ 1982 Chevy K30 CCLB fleetside. Formerly a cab and chassis, now a fleetside dually with the rear wheels tucked underneath. 454/th400/np205/C14/D60, 6/4 inch LIFT, not drop.

04-15-2012, 07:39 AM	#2
v30crewcab Registered User Join Date: Apr 2012 Location: Chatt Tn Posts: 966	Re: How about some pics of 73-91 crew cabs I think they are 3.5" thick ones. I will try to get a measurement on them today. I am getting an 03 disk brake rear this coming week to run, so I'm not gonna use them anymore. I don't run the duals on it anymore and I want factory disk. __________________ 88 military v30 crewcab shortbed 5.9 cummins, nv4500, 205 86 k30, 89 diesel burb, 76 gmc pathfinder 71 longbed 5.3 4l80 http://67-72chevytrucks.com/vboard/s...d.php?t=522535

04-15-2012, 07:41 AM	#3
v30crewcab Registered User Join Date: Apr 2012 Location: Chatt Tn Posts: 966	Re: How about some pics of 73-91 crew cabs So, did all the crewcabs have the chrome trim above the doors, or did some come without it? I'm thinking of removing mine and welding up the holes when I repaint it here soon. whatcha think? __________________ 88 military v30 crewcab shortbed 5.9 cummins, nv4500, 205 86 k30, 89 diesel burb, 76 gmc pathfinder 71 longbed 5.3 4l80 http://67-72chevytrucks.com/vboard/s...d.php?t=522535

04-15-2012, 11:04 AM	#6
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: How about some pics of 73-91 crew cabs Eric28miller, sweet build! Did you put an aftermarket cam in your engine or is it a stock one? Very nice work! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-16-2012, 06:53 AM	#7
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: How about some pics of 73-91 crew cabs I think all of them had the chrome drip rails.... Posted via Mobile Device __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

04-16-2012, 04:07 PM	#8
72longhornTX Registered User Join Date: Sep 2007 Location: Houston, TX Posts: 115	Re: How about some pics of 73-91 crew cabs http://www.tndieselpower.com/site/ They have one of the best crossmembers I have seen to swap the Cummins into these truck. I have one waiting to go into my truck when I get back. __________________ Current: 2012 Ford F-250 4x4 6.7 Powerstroke 1971 C-20 2wd 350/TH400 Former: 1979 C-20 2wd 350/TH400, 300+hp. Rattle can paint job 1982 K-30 454/700R4. 4in lift with 37" Goodyear MT/R's Lots of goodies - Trail clean up truck

04-16-2012, 04:27 PM	#9
rambone86 Registered User Join Date: Mar 2012 Location: brownsville, texas Posts: 14	Re: How about some pics of 73-91 crew cabs Hey 72longhornTX, are you going to swap your 454? I just got the truck yesterday, filled the tank, went to work and I'm half empty. Damn, didn't think they were that thirsty. I need to do the swap asap as this is going to be my daily driver.

04-18-2012, 08:25 PM	#10
nekkidhillbilly Account Suspended Join Date: Apr 2009 Location: hazard, ky Posts: 1,674	Re: How about some pics of 73-91 crew cabs im sure it was different jeff but its not my cup of tea either

04-18-2012, 08:30 PM	#11
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: How about some pics of 73-91 crew cabs If it were lowered and tucked the rear tires a bit, I think it would be sweet. I like it....different. I have the same C+C rear 14 in mine as well. With some slight adjustments on the rear fenders they would tuck no problem. Want to see pictures as it comes along.... __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"

04-18-2012, 08:58 PM	#12
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: How about some pics of 73-91 crew cabs that's awesome i love step sides (on the 70s) trucks can you get pics of the inside of the bed i got one not to long ago and al it is is a shell no floor and only 3 cross member that are welded n __________________ Edited by staff

04-18-2012, 11:20 PM	#13
The Liberace Registered User Join Date: Mar 2012 Location: Phoenix Posts: 23	Re: How about some pics of 73-91 crew cabs I kinda posted my car pics up to show I have enough crap that's lowered. I look forward to something I don't have to lay down to get in. The truck is meant to be my car hauler and is a budget build. I like the fact that not everybody dose the step side, Its beefy and sexy at the same time , like me. Right Jeff!

04-19-2012, 12:36 AM	#15
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: How about some pics of 73-91 crew cabs craig i like it welcome to the forum __________________ CHEVY ONLY... Nothin Else !

04-19-2012, 11:07 PM	#17
rambone86 Registered User Join Date: Mar 2012 Location: brownsville, texas Posts: 14	Re: How about some pics of 73-91 crew cabs I just ordered the crossmember for a 89-93 12v swap. What transmission should I be looking to install? It's going to be my daily driver and used to tow my boat, not much more than that.

04-19-2012, 11:09 PM	#18
JPalmer81 Registered User Join Date: Mar 2012 Location: Anchorage, AK Posts: 351	Re: How about some pics of 73-91 crew cabs Nv4500 __________________ 1988 Chevy Crew Cab 1ton 4x4 SRW LWB 1977 Dodge 1 ton 4x4 My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=516872 "The price of Freedom is Eternal Vigilance"

04-20-2012, 01:40 PM	#20
rambone86 Registered User Join Date: Mar 2012 Location: brownsville, texas Posts: 14	Re: How about some pics of 73-91 crew cabs [QUOTE=Dieselwrencher;5325151]Do you want auto or manual?[/QUOTE I want an automatic. My mechanic wants to make this swap as simple as possible, he doesn't want to get into critical wiring, this being his first diesel swap. I'm overhelmed with all the info on these swap sights.



Register or Log In To remove these advertisements.

04-20-2012, 02:10 PM	#21
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: How about some pics of 73-91 crew cabs A518 auto from an early 90s Cummins truck. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

04-20-2012, 02:18 PM	#23
rambone86 Registered User Join Date: Mar 2012 Location: brownsville, texas Posts: 14	Re: How about some pics of 73-91 crew cabs thanks for the info guys. gonna start craiglisting for parts.

04-21-2012, 10:25 PM	#24
Stew_Magoo Account Suspended Join Date: Dec 2011 Location: Milwaukee, WI Posts: 200	Re: How about some pics of 73-91 crew cabs Got my 19.5's mounted today, did some more work but not done with this weekends list of projects on the rig. More picks tomorrow when i get some more done!

04-21-2012, 10:59 PM	#25
JPalmer81 Registered User Join Date: Mar 2012 Location: Anchorage, AK Posts: 351	Re: How about some pics of 73-91 crew cabs Not sure i'm feeling the 19.5's, but whatever floats ur boat, more power to ya! __________________ 1988 Chevy Crew Cab 1ton 4x4 SRW LWB 1977 Dodge 1 ton 4x4 My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=516872 "The price of Freedom is Eternal Vigilance"

Register or Log In To remove these advertisements.