What did you do with your truck today, Part 3 - Page 149 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crossfire84 · 08-25-2019, 04:15 PM

Nice going!

1948ChevyDumpFixer · 08-25-2019, 07:50 PM

sorry, dupe post

**gigamanx** · 08-25-2019, 07:50 PM

Today I got looooww..

20190825_185712 by giga manx, on Flickr

20190825_185726 by giga manx, on Flickr

1948ChevyDumpFixer · 08-25-2019, 07:51 PM

I dumped a load of compost and manure at a friend's house, and diagnosed a leak from my cowl vent to a split hose under the dash:

slck57 · 08-25-2019, 09:15 PM

Working on another mod. A 55 car front bumper (flipped).

1948ChevyDumpFixer · 08-25-2019, 09:20 PM

Quote:

Originally Posted by slck57

Working on another mod. A 55 car front bumper (flipped).

sweet!

NorCalGal · 08-26-2019, 12:53 AM

A well deserved trophy! Congratulations

**jweb** · 08-26-2019, 10:49 AM

Quote:

Originally Posted by NorCalGal

A well deserved trophy! Congratulations

Thanks, I was really surprised there were some cars I thought were much nicer.

My excitement quickly went away yesterday when I decided to take a lunch run in the truck and noticed a pool of fluid.

After hours of messing with my brake proportioning vale I finally found that my brake light pressure switch was leaking around the top. The worst part was trying to get help at an auto parts store. I had to look it up on my phone and show him the part number. Still wanted to know what year, make and model.

1963 Buick Skylark, Advanced Auto part # S199 for anyone else that has a similar switch.

MARTINSR · 08-26-2019, 11:03 AM

I worked at a parts counter for a year once, the thing I learned about things like this is simply tell them the make model and year of the PART you are looking for.
I personally liked to hear what it was in and all that but to look up the part (without a number) you simply need the make model and year of the PART. Many people at the counter don't have the love of all the goofy stuff as I do so they get confused with the stories and it's best just to "tell them what they need to hear."

Brian

**jweb** · 08-26-2019, 11:36 AM

Quote:

Originally Posted by MARTINSR

I worked at a parts counter for a year once, the thing I learned about things like this is simply tell them the make model and year of the PART you are looking for.
I personally liked to hear what it was in and all that but to look up the part (without a number) you simply need the make model and year of the PART. Many people at the counter don't have the love of all the goofy stuff as I do so they get confused with the stories and it's best just to "tell them what they need to hear."

Brian

You're right, sometimes I forget how many parts they are dealing with. I used to buy all my parts at Napa because there were several people that worked there into old cars. I just need to go in prepared in the future.

NorCalGal · 08-26-2019, 01:26 PM

Yep, it’s one of the unfortunate side effects of computers. Anyone can look up parts who can type in a year make and model but sometimes you need somebody who knows cars.

NorCalGal · 08-26-2019, 01:27 PM

Yep, it’s one of the unfortunate side effects of computers. Anyone can look up parts who can type in a year make and model but sometimes you need somebody who knows cars.

Russell Ashley · 08-26-2019, 02:01 PM

I went to buy some 1/4 inch fuel line for my lawn mower at an Advance Auto parts store. The girl employee said We don't have lawn mower parts here. Unfortunately my NAPA store is becoming as bad.

MARTINSR · 08-26-2019, 04:12 PM

Quote:

Originally Posted by Russell Ashley

I went to buy some 1/4 inch fuel line for my lawn mower at an Advance Auto parts store. The girl employee said We don't have lawn mower parts here. Unfortunately my NAPA store is becoming as bad.

That's the thing, just simply say 1/4" fuel line and you should get it. We need to forget our anger towards the person behind the counter and simply give them what they need to get the part.

Brian

Russell Ashley · 08-26-2019, 06:08 PM

I didn't get mad at the girl as it was a little comical to me. The cabinet with different spools of hoses that you pull out the length that you want was right behind her. She thanked me for pointing it out. I don't get mad at a clerk at a store that I will probably need to go back to. Actually, at my age, 78, I try not to get mad at anything any more.

MiraclePieCo · 08-26-2019, 09:26 PM

Quote:

Originally Posted by Russell Ashley

I didn't get mad at the girl as it was a little comical to me. The cabinet with different spools of hoses that you pull out the length that you want was right behind her. She thanked me for pointing it out. I don't get mad at a clerk at a store that I will probably need to go back to. Actually, at my age, 78, I try not to get mad at anything any more.

Sometimes we fail to realize how knowledgeable we have become with all our age and experience. Things we know and assume everyone knows are all new to younger people.

.

DransportGarage · 08-26-2019, 10:16 PM

Quote:

Originally Posted by MiraclePieCo

Sometimes we fail to realize how knowledgeable we have become with all our age and experience. Things we know and assume everyone knows are all new to younger people.

.

...but it really is a rarity these days to find someone behind the counter that has lived the dream of building cars...

Black_Sheep · 09-04-2019, 09:49 PM

Instead of going to the car show at the Blacksmith on Labor Day I went for a cruise and ended up at an old feed mill that I often pass in my travels. They were closed for the holiday so I was able to take some pictures with a rustic backdrop. This was my favorite shot of the day..

MARTINSR · 09-04-2019, 10:53 PM

Very cool, that truck is just one of the best, you did an awesome job!

Brian

**idbeast** · 09-06-2019, 07:56 AM

I am so far behind on my 5 minutes a day....

MARTINSR · 09-06-2019, 11:44 AM

Quote:

Originally Posted by idbeast

I am so far behind on my 5 minutes a day....

OMG I would need to do five hours a day for a month to catch up. CRAP!

Brian

DransportGarage · 09-06-2019, 11:51 AM

I am shooting four coats of clear today on the final parts needing paint (except for the parts I forgot about). Here's the production from earlier in the week, picking up UVs to help the cure. 100 hours of scuff & buff and I'm another day closer to being done!

evilokc · 09-07-2019, 11:06 AM

went to cars and coffee this morning. I was the only ad truck there out of 400 cars.. makes no sense but it happened.

**idbeast** · 09-07-2019, 12:18 PM

I figured I better get the front stabilizer bar on the beast, so I got it wire brushed, primed and painted before the rain starts today.

Jim W

nvrdone · 09-07-2019, 06:22 PM

so today I restart on my brakes. trying to add a power booster & 2 chamber m/c to my drum brakes. still haven't figured out why I have no pressure to the rear brakes when the engine is started but do have pressure when the engine is off. wish me luck.

08-25-2019, 04:15 PM	#3701
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,751	Re: What did you do with your truck today, Part 3 Nice going! __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

08-25-2019, 07:50 PM	#3702
1948ChevyDumpFixer Registered User Join Date: Aug 2019 Location: NC Posts: 30	Re: What did you do with your truck today, Part 3 sorry, dupe post Last edited by 1948ChevyDumpFixer; 08-25-2019 at 09:19 PM.

08-25-2019, 07:50 PM	#3703
gigamanx Senior Member Join Date: Sep 2016 Location: Hershey, PA Posts: 1,004	Re: What did you do with your truck today, Part 3 Today I got looooww.. 20190825_185712 by giga manx, on Flickr 20190825_185726 by giga manx, on Flickr __________________ Current Build Thread 1930 Ford Model A Modern Twist: Ford Model A Rat Rod With a Modern Twist Build Thread Phase 1 "The Swap": 1949 3100 with S10 swap. Beginner build with ambition! Build Thread Phase 2 "The Drop": Beginner Build with Ambition gets Air Ride

08-25-2019, 07:51 PM	#3704
1948ChevyDumpFixer Registered User Join Date: Aug 2019 Location: NC Posts: 30	Re: What did you do with your truck today, Part 3 I dumped a load of compost and manure at a friend's house, and diagnosed a leak from my cowl vent to a split hose under the dash:

08-25-2019, 09:15 PM	#3705
slck57 Registered User Join Date: Sep 2014 Location: Wichita Falls TX Posts: 79	Re: What did you do with your truck today, Part 3 Working on another mod. A 55 car front bumper (flipped). Attached Images

08-26-2019, 12:53 AM	#3707
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: What did you do with your truck today, Part 3 A well deserved trophy! Congratulations __________________ Jan's 53

08-26-2019, 11:03 AM	#3709
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 I worked at a parts counter for a year once, the thing I learned about things like this is simply tell them the make model and year of the PART you are looking for. I personally liked to hear what it was in and all that but to look up the part (without a number) you simply need the make model and year of the PART. Many people at the counter don't have the love of all the goofy stuff as I do so they get confused with the stories and it's best just to "tell them what they need to hear." Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

08-26-2019, 01:26 PM	#3711
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: What did you do with your truck today, Part 3 Yep, it’s one of the unfortunate side effects of computers. Anyone can look up parts who can type in a year make and model but sometimes you need somebody who knows cars. __________________ Jan's 53

08-26-2019, 01:27 PM	#3712
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: What did you do with your truck today, Part 3 Yep, it’s one of the unfortunate side effects of computers. Anyone can look up parts who can type in a year make and model but sometimes you need somebody who knows cars. __________________ Jan's 53

08-26-2019, 02:01 PM	#3713
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,648	Re: What did you do with your truck today, Part 3 I went to buy some 1/4 inch fuel line for my lawn mower at an Advance Auto parts store. The girl employee said We don't have lawn mower parts here. Unfortunately my NAPA store is becoming as bad.

08-26-2019, 06:08 PM	#3715
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,648	Re: What did you do with your truck today, Part 3 I didn't get mad at the girl as it was a little comical to me. The cabinet with different spools of hoses that you pull out the length that you want was right behind her. She thanked me for pointing it out. I don't get mad at a clerk at a store that I will probably need to go back to. Actually, at my age, 78, I try not to get mad at anything any more.

09-04-2019, 09:49 PM	#3718
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Re: What did you do with your truck today, Part 3 Instead of going to the car show at the Blacksmith on Labor Day I went for a cruise and ended up at an old feed mill that I often pass in my travels. They were closed for the holiday so I was able to take some pictures with a rustic backdrop. This was my favorite shot of the day.. Attached Images __________________ Mark Brother's keeper - '58 Stepside build

09-04-2019, 10:53 PM	#3719
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 Very cool, that truck is just one of the best, you did an awesome job! Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

09-06-2019, 07:56 AM	#3720
idbeast Senior Member Join Date: Oct 2016 Location: Olympia, WA Posts: 523	Re: What did you do with your truck today, Part 3 I am so far behind on my 5 minutes a day....

09-06-2019, 11:51 AM	#3722
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Re: What did you do with your truck today, Part 3 I am shooting four coats of clear today on the final parts needing paint (except for the parts I forgot about). Here's the production from earlier in the week, picking up UVs to help the cure. 100 hours of scuff & buff and I'm another day closer to being done! Attached Images __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to)



Register or Log In To remove these advertisements.

09-07-2019, 11:06 AM	#3723
evilokc Registered User Join Date: Mar 2013 Location: albuquerque New Mexico Posts: 522	Re: What did you do with your truck today, Part 3 went to cars and coffee this morning. I was the only ad truck there out of 400 cars.. makes no sense but it happened.

09-07-2019, 12:18 PM	#3724
idbeast Senior Member Join Date: Oct 2016 Location: Olympia, WA Posts: 523	Re: What did you do with your truck today, Part 3 I figured I better get the front stabilizer bar on the beast, so I got it wire brushed, primed and painted before the rain starts today. Jim W Attached Images

09-07-2019, 06:22 PM	#3725
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,482	Re: What did you do with your truck today, Part 3 so today I restart on my brakes. trying to add a power booster & 2 chamber m/c to my drum brakes. still haven't figured out why I have no pressure to the rear brakes when the engine is started but do have pressure when the engine is off. wish me luck.

Register or Log In To remove these advertisements.