![]() |
|
![]() |
#1 |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
I do want to quickly go through something that I've found little of in the way of detail on in existing threads...but got great help via PM to members. I purchased new rear side panels from TruckWorld through Truckseats (Tim). The most common refrain on these is that they are difficult to fit over carpeted tubs and that you must be sure to purchase CST carpet that is cut to stop at the panels and not extend to the bed wall...both true.
However on my initial fitment, I could not get the panel fully seated even though I had no carpet at all on the floor. Two things: 1. My bed wall and tubs have been replaced. 2. My truck was originally a base truck, I had to procure and install trim strips and panel bracketry. (I don't think this had much bearing if at all, but for the record) My biggest concern was at the B-pillar, where I didn't think it could go from the trim strip to the B-pillar, making an S-bend and still adapt flatly to the B-pillar. livrat (Mark) gave me the best advice. He had the same problems...he shaved the lower portion of the panel to go over the carpet and he widened the groove in the trim trim by gently prying it open. Since I was not going to put carpet on the tubs, I didn't have to trim the panel. But the panel fit into the groove was my biggest problem. The panels are thick, and of course I had re-chromed my strips. I figured out how wide the groove needed to be by gently prying it open until I could just wedge the panel in. I made myself a gauge with a paint stick to confirm it was wide enough throughout the length. The fit was so snug on a partial try in, we elected not to install the floor L brackets, only the wall A brackets. I decided I didn't want to punch holes for screws and grommets a while ago, so we just put velcro on the brackets.
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." Last edited by IronCanine; 05-23-2015 at 11:03 PM. |
![]() |
![]() |
![]() |
#2 | |
Cluster King
![]() Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
|
Re: 70 Blazer Frame Off
Quote:
I'll bet you are super excited to be almost done with the build. Everything is looking great and you should be proud to have such a great example of correct. I love it ![]() Take care, Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C |
|
![]() |
![]() |
![]() |
#3 |
2WD Jimmy
![]() Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,564
|
Re: 70 Blazer Frame Off
[QUOTE= I'm pretty sure the front was black phosphate from the factory and I missed that when I sent things to be plated/coated../QUOTE]
Where did you send out for plating? Im interested in a plater that does the black phosphate. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2003
Location: Rayne, LA
Posts: 2,782
|
Re: 70 Blazer Frame Off
Did you make it to the show? Pics?
__________________
Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build |
![]() |
![]() |
![]() |
#5 |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
Well...we thrashed it hard this past week/weekend. The last four days it was 8am to 10pm or later. To look at where we were and what we had to do, a couple of days seemed very doable. But every single part required massaging, fiddling, patience and in most cases a little ingenuity to get it to fit well and arrive unmarked....and we had bugs we had to work out...but in the end it was the weather. No rain for two weeks then today, scattered showers during the day and thunderstorms this afternoon. The show was officially to begin 15 minutes ago, and I have a few friends going and taking cars...I just couldn't chance it. We haven't even started on the top yet. As disappointed as I am not to take it today...I would have been sicker if she'd gotten wet....what's more she's still got zero road time, which is a risk. So we took our foot off the accelerator at about lunch today and called the ball. I'll post a few pics in a bit.
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." Last edited by IronCanine; 05-25-2015 at 04:36 PM. |
![]() |
![]() |
![]() |
#6 |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
A few pics...the tire cover I got was too small...on to the return pile. I also held off on the window felts/rubber. When we decided the show was a no go this morning, it gave me the latitude to not install a part I was not loving. We're going to try again on those.
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
![]() |
![]() |
![]() |
#7 |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
Even though we're basically there (I've got to replace a brake line union), I don't know if she'll get any real shake down time this week. Rain is forecast all week. We'll just take a little break and then maybe jump on the top.
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
![]() |
![]() |
![]() |
#8 | |
Registered User
![]() Join Date: Jan 2015
Location: tacoma
Posts: 247
|
Re: 70 Blazer Frame Off
Quote:
thanks
__________________
vehicle's I own 1968 gmc 3/4 ton camper special 1972 gmc jimmy 1972 Chevrolet nova 1947 ford 1.5 ton dully 1997 f-350 1 ton 2007 Chrysler 300 with hemi |
|
![]() |
![]() |
![]() |
#9 |
Carpe manana
![]() ![]() Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,379
|
Re: 70 Blazer Frame Off
Strong effort but it's worth the wait to get it just right. Besides, once the public sees your Blazer K5 values will shoot through the roof so this buys me time to find a reasonably priced next project
![]()
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 ![]() |
![]() |
![]() |
![]() |
#10 | |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
Quote:
...I don't know about values, but I am super stoked for another DeadheadNM build. Anything I can do to make that happen, (save buying the truck ![]()
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
|
![]() |
![]() |
![]() |
#11 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: 70 Blazer Frame Off
gorgeous blazer! The last shot of the undercarriage is what many strive for but few achieve.
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#12 |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
Thanks Johnathon...I really appreciate that. That's what goofed me up on my daily driver plans(the bottom of the truck turned out much nicer than I had expected). It's the part of the build I might be most proud of. There were times this past weekend when I was on the creeper staring up...and I just wanted to stay there....one of those times is when I snapped that pic...I thought it was a nice view.
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Sep 2003
Location: Rayne, LA
Posts: 2,782
|
Re: 70 Blazer Frame Off
Very, VERY Impressive! I don't blame you for not taking it out in the rain. There will be another show.
I have a question for you. I know you completely refurbished your console, but where did you find the rubber bumpers to keep the lid from rattling? I can't seem to find any vendors that have them.
__________________
Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Sep 2013
Location: Bangor pa
Posts: 1,223
|
Re: 70 Blazer Frame Off
Man that all looks good. Like was said about the undercarriage. I have a lot of rust on mine and looking at that clean metal and seeing how it's supposed to look is just awesome.
__________________
72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks. |
![]() |
![]() |
![]() |
#15 | |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=661616 I don't know how correct those referenced in the last post are. NOS ones seem to pop up a fair amount on here and on eBay. Thanks. Rust is a beast. You've seen us plow through more than our fair share...makes me appreciate where we've gotten to all the more.
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: 70 Blazer Frame Off
Well done, Brad!
I wouldn't have chanced it in that weather either. For that hard work, just to get rained on before you even put 100 miles on it would be devastating.
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
![]() |
![]() |
![]() |
#17 |
Registered User
![]() Join Date: Apr 2007
Location: Acworth, GA
Posts: 441
|
Re: 70 Blazer Frame Off
I was on Lake Altoona all weekend long and flew out of Atlanta airport in a heckuva storm yesterday evening...good thing you didn't take her out. Gorgeous truck...can't wait to see it on the road.
|
![]() |
![]() |
![]() |
#18 |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
Thanks Mike....but 100 miles nothing, she's still sitting on 5/10ths of a mile, not even 1. Even if it had not rained, our first test drive would have literally been to the show...and devastating would be the correct word disappointment(x expectations) + fatigue = devastating ...or in different mathematical terms insult+injury.
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Aug 2014
Location: Minneapolis, MN
Posts: 254
|
Re: 70 Blazer Frame Off
Very Nice! I have been following your build for many months. It has served as an inspiration to me to pull the tub off and go for it as you did. I really like your use of many original parts, bolts, screws, etc. You probably already know this but the beautiful "phosphated/parkerized" parts may still be subject to some surface rust over time. I have a 69 Camaro that I restored a few years ago and I really have to wipe down my phosphate parts every few months (well maybe twice a year) with a product called Boeshield T-9. A lot of Camaro guys use it and it does help keep the rust away.
Your work is 11 out of 10! Lee
__________________
72 Ochre Blazer 69 Camaro Z28 Garnet Red 48 Willys (rolled) |
![]() |
![]() |
![]() |
#20 | |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
Quote:
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
|
![]() |
![]() |
![]() |
#21 |
Registered User
![]() Join Date: May 2013
Location: wall,nj
Posts: 865
|
Re: 70 Blazer Frame Off
Just amazing work.
__________________
Tom 71 K2500 71 K5 Jimmy |
![]() |
![]() |
![]() |
#22 |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Aug 2014
Location: Minneapolis, MN
Posts: 254
|
Re: 70 Blazer Frame Off
If the bolt or part is attached to the vehicle, I just spray some on a rag and apply enough to cover the part to get a wet surface and let it dry. As long as there is not a puddle it will, in my opinion, dry flat. My Camaro has gone through, and passed, judging with the Boeshield applied. It does need to be reapplied from time to time to keep up the appearance (I think any product will), especially the hood springs....give them a good dose! Also check out "Rust Prevention Magic". It seems to work good on bare metal.
__________________
72 Ochre Blazer 69 Camaro Z28 Garnet Red 48 Willys (rolled) |
![]() |
![]() |
![]() |
#24 |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
Hadn't posted in a few days. Inner fenders on the front, really kind of makes it seem finished even though we're still working. Thanks to smbrouss70 (Steven) for the photos of the emissions decal position.
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
![]() |
![]() |
![]() |
#25 |
I'm trying....
![]() Join Date: Oct 2013
Location: Athens, GA
Posts: 2,612
|
Re: 70 Blazer Frame Off
Cowl back on. Eric thinks I should keep the 76 ball on the antenna (for sentimental reasons I guess)...never gonna happen. scf100 (Stuart) swung by today to take a look and, God bless him, he got put instantly to work. We had a really sharp mechanic make a house call tonight to help us work through our brake line issues and Stuart ended up on the ground with us bleeding brakes. Unfortunately all that combined brain power and expertise and effort left the shop tonight with the issue unresolved. Gotta get a couple of new lines and try again.
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
1970, blazer, k5 blazer, restoration, silver |
|
|