Power Steering Adapter Plates

[Rickey-Lee]

Thanks! PAYPAL sent.

[64chevmn]

PM sent to purchase an adapter plate from you Captainfab

Dan

[Captainfab]

PM replied to

Originally Posted by 64chevmn

PM sent to purchase an adapter plate from you Captainfab

Dan

[james payne]

I have a 62 chevy truck that I need a power steering adapter plate and power brake booster adapter for. I have an excellent donor car (1975 monte carlo). Can I use the power steering box, steering column and power brake booster from this car with your adapter plates?

[Captainfab]

I do not yet have a power steering box adapter plate for the '60-'62's. Hopefully in the next few months. However I have sold a few of these to guys that have made them work on their '60-'62's. You can not use any car steering box on your truck. It must be from a '68-'86 C series or '87-'91 R series pickup, Suburban or 2wd K5 Blazer.

I am not familar with the Monte Carlo boosters, so I do not know if they are compatable with my booster bracket. Does your truck have an auto trans or does it still have a manual trans with the hydraulic clutch?

As for the steering column, most anything can be done if you want to put the work into it to make it work. In other words, it will not be a simple bolt in swap.

Originally Posted by james payne

I have a 62 chevy truck that I need a power steering adapter plate and power brake booster adapter for. I have an excellent donor car (1975 monte carlo). Can I use the power steering box, steering column and power brake booster from this car with your adapter plates?

[Underwoj]

hi - fixin to buy all the parts to FINALLY get PS on my 70 C10...do I need one of these brackets for the 70 model?

thanks!

[65 C20]

Hello Captain.
I recently purchased one of your adapter plates.
I will start with what I have, I ordered my parts for a 70 chev pick-up. My truck is a 65 C20
Cardone 27-7501 box which has the Saginaw # 7802644 on it.
Moog K 6131 pitman arm.
The differences are that on the template the center of shaft to center of pitman arm measurement is 6 1/2 inches.
The measurment of pitman arm is 6 1/4 inches.
Do I have the wrong pitman arm ?
Or is the quarter inch nothing to worry about.







As expected your plate and steering shaft adapter look great.

Thanks

[Captainfab]

The pitman arms should be 5-1/4" center to center. I just checked the template and it does show to be 5-1/2". I did not realize that. I will have to see about correcting that. The main thing to be concerned with is the hole locations.

Originally Posted by 65 C20

Hello Captain.
I recently purchased one of your adapter plates.
I will start with what I have, I ordered my parts for a 70 chev pick-up. My truck is a 65 C20
Cardone 27-7501 box which has the Saginaw # 7802644 on it.
Moog K 6131 pitman arm.
The differences are that on the template the center of shaft to center of pitman arm measurement is 6 1/2 inches.
The measurment of pitman arm is 6 1/4 inches.
Do I have the wrong pitman arm ?
Or is the quarter inch nothing to worry about.







As expected your plate and steering shaft adapter look great.

Thanks

[Captainfab]

No you do not need this adapter plate. A power steering box will bolt right up to your frame. The trucks from '68 up were available with integral power steering, so the frame will accomodate the box.

Originally Posted by Underwoj

hi - fixin to buy all the parts to FINALLY get PS on my 70 C10...do I need one of these brackets for the 70 model?

thanks!

[Underwoj]

thanks Cap - preciate the quick response you rock!

[murphy98]

[QUOTE=Captainfab;6500400]I do not yet have a power steering box adapter plate for the '60-'62's. Hopefully in the next few months. However I have sold a few of these to guys that have made them work on their '60-'62's.


Hi Captainfab,
just wondering if you have had a chance to make up an adapter plate for the '60-'62 frames yet or if you will have one in the near future? I hope to do the conversion on my '62 in the next 2-4 weeks.

Also wondering if any of you guys that have installed Captinfab's adapter plate on your '60-'62 frames can give any feedback on how the plate worked and if there were any modifications (from the instructions supplied) needed to make the plate work? Pics of your '60-'62 install would be great too, could not find any on this thread.
Thanks.

[Captainfab]

I do not yet have a power steering box adapter plate for the '60-'62's. It's been tough to get this done with Winter, still working 70-80 hrs a week and trying to make room in my shop to work on it. I haven't given up, but I can not make any promises as to exactly when I will get it done.

[sotark77]

i am new to all this, so please excuse my ignorant question. currently working on my 1965 c10 and was wondering, whats the purpose of the adapter plate? does it serve as a extra support for gear box?

[67 cst swb]

I have a local friend (non member) that needs a plate for his '63 2wd. Is there a way he can contact you directly? Do you take pay-pal or what are you payment options?
I also sent you a PM

[Captainfab]

I replied to your PM

[Captainfab]

Here is a helpful thread for those of you that have 4x4's and are installing power steering.

http://www.67-72chevytrucks.com/vboa...power+steering

[Slammed64c30]

Hello captainfab, do you still have the brackets for sale? PM me?
I have a 64 c30 and am using an 86 c20 suburban to swap everything.
Thanks.
Blane

[Captainfab]

I replied to your PM

Originally Posted by Slammed64c30

Hello captainfab, do you still have the brackets for sale? PM me?
I have a 64 c30 and am using an 86 c20 suburban to swap everything.
Thanks.
Blane

[swamp rat]

I have a 67, does it matter what years power steering unit i get to use the bracket? 71/72 ok?

[Captainfab]

If your '67 is a 2wd, you do not need this adapter plate. All you need are four 1/4" spacers. I have those as well if you need them. All the truck baser steering boxes from '68-'87 are interchangeable. You do not have to have a '71/'72 box.

Originally Posted by swamp rat

I have a 67, does it matter what years power steering unit i get to use the bracket? 71/72 ok?

[swamp rat]

Thank you for the information, just make them out of plate steel then..

Originally Posted by Captainfab

If your '67 is a 2wd, you do not need this adapter plate. All you need are four 1/4" spacers. I have those as well if you need them. All the truck baser steering boxes from '68-'87 are interchangeable. You do not have to have a '71/'72 box.

[Captainfab]

Yes that is what I have them cut out of.

Originally Posted by swamp rat

Thank you for the information, just make them out of plate steel then..

[fredhlynch2]

Captain,

I sent you a PM inquiring about purchasing the power steering plate and steering tube.

Best,

Fred

[hpcgmc]

Originally Posted by Captainfab

If your '67 is a 2wd, you do not need this adapter plate. All you need are four 1/4" spacers. I have those as well if you need them. All the truck baser steering boxes from '68-'87 are interchangeable. You do not have to have a '71/'72 box.

I'm looking to add power steering to my 67 1/2t 2wd. Can you give me some info on the spacers? Also, can you explain the need for the adapter tube and flange? I'm gathering parts to put an engine and power steering in my truck in c couple months. Since my truck is all apart, I can't look at it to figure out how the tube and flange work. Also, will I need one of your rag joints as well?

Thanks!

[Captainfab]

The four 1/4" spacers are $12.00 shipped, as they come from the laser, or $30.00 shipped if I clean them up. Do you need the hardware also? If so that is $8.00. On the '67's you should not need the tube and flange as your steering column shaft should already be the correct length. The tube and flange provides a way to shorten the steering column shaft without the need to weld.

Originally Posted by hpcgmc

I'm looking to add power steering to my 67 1/2t 2wd. Can you give me some info on the spacers? Also, can you explain the need for the adapter tube and flange? I'm gathering parts to put an engine and power steering in my truck in c couple months. Since my truck is all apart, I can't look at it to figure out how the tube and flange work. Also, will I need one of your rag joints as well?

Thanks!