Dropmembered trucks - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**superflysteiny** · 12-20-2011, 04:36 PM

Dinos63 · 12-20-2011, 06:11 PM

Quote:

Originally Posted by superflysteiny

drool!!

Nobaddaze · 12-20-2011, 04:38 PM

Thanks for the response nate. So all geometry is identical between all versions, Its just asthetic improvements between versions? From the cell phone pics i saw, it looked to be a 3.2 with tube setup. Are there any differences in your arms(versions) or any designators to tell me what version they are?

thanks again

PBFAB.COM · 12-20-2011, 04:42 PM

Quote:

Originally Posted by Nobaddaze

Thanks for the response nate. So all geometry is identical between all versions, Its just asthetic improvements between versions? From the cell phone pics i saw, it looked to be a 3.2 with tube setup. Are there any differences in your arms(versions) or any designators to tell me what version they are?

thanks again

There had been a couple minor tweaks to geometry over the years... not due to any concerns or issues... but mainly my inability to leave anything alone!

The only variations on the arms that could exist would be length. We have a standard length option (same as factory) and a one-inch narrowed length option that would be compatible with the Dropmember.

Nate

Nobaddaze · 12-20-2011, 05:14 PM

So it would be safe to assume that if these arms are mated with your DM that they are the narrowed arms? I hope so because thats what i want. I think I need to see this thing and give you a call. I really appreciate all your help with my questions.

BACKYARD88 · 12-20-2011, 05:41 PM

Quote:

Originally Posted by Nobaddaze

So it would be safe to assume that if these arms are mated with your DM that they are the narrowed arms? I hope so because thats what i want. I think I need to see this thing and give you a call. I really appreciate all your help with my questions.

Either one could be bolted to the Dropmember. The Dropmember already narrows the track width, the arms just narrow it more. The one in my avatar is the 3.2.

Nobaddaze · 12-20-2011, 05:45 PM

RIGHT ON! I didnt know the DM Narrowed already. Thanks!

PBFAB.COM · 12-20-2011, 05:54 PM

Quote:

Originally Posted by Nobaddaze

RIGHT ON! I didnt know the DM Narrowed already. Thanks!

The DM narrows the track nearly an inch and a half per side all by itself.

Just shoot me a text later when you go check it out.

Nate

Nobaddaze · 12-20-2011, 06:18 PM

^^^^ That truck blows my mind every time i see it!!! Absolutely Beautiful

Mad Rods · 12-20-2011, 10:54 PM

x2

BIG KRIS · 12-21-2011, 09:04 AM

SUPERFLY! That is all!
Posted via Mobile Device

jimmydean · 12-28-2011, 04:48 PM

$400 a wheel, should have all sorts of options. I am looking at spending $400 for the SET.

jmedero · 12-28-2011, 05:46 PM

Centerline you can get most 20's for @$300 22 @$400
Posted via Mobile Device

m6z · 12-28-2011, 07:12 PM

centerline, coys, american racing, etc. I'm sure there are a few others.

BIG KRIS · 12-28-2011, 10:26 PM

Got 20 in Coys chrome for my dads truck for about 1500 and a set of nittos for a 1000
Posted via Mobile Device

jasonhall · 02-15-2012, 08:56 PM

Does the alternater hit the rack on the ls1's ? What set up are you guys running

texastrendz · 02-18-2012, 12:41 AM

Quote:

Originally Posted by jasonhall

Does the alternater hit the rack on the ls1's ? What set up are you guys running

This is a stock acc. drive on my 5.3 drive by wire. I dont know if this helps.

edflores · 02-18-2012, 10:55 PM

Quote:

Originally Posted by texastrendz

This is a stock acc. drive on my 5.3 drive by wire. I dont know if this helps.

Did you remove the AC compressor?

texastrendz · 02-18-2012, 10:59 PM

Quote:

Originally Posted by edflores

Did you remove the AC compressor?

It was off of the motor when I picked it up, I have it but not have installed it yet. Now you got me thinking, I hope it fits, lol. Always something.

realnice1s · 02-18-2012, 10:19 AM

C-10 vs. F100

rustSpot · 02-18-2012, 06:07 PM

Quote:

Originally Posted by realnice1s

C-10 vs. F100

LOVE this pic! Seen it before. Anymore shots?

realnice1s · 02-19-2012, 04:05 PM

Quote:

Originally Posted by rustSpot

LOVE this pic! Seen it before. Anymore shots?

No. I found this out on the web too. Just thought it needed to be here.

YBNORML · 02-18-2012, 09:32 PM

Quote:

Originally Posted by realnice1s

C-10 vs. F100

Nice pic, although I am a die hard Chevy man. Both those trucks are killer. I don't think I could pick a fave!

realnice1s · 02-19-2012, 04:13 PM

Quote:

Originally Posted by YBNORML

Nice pic, although I am a die hard Chevy man. Both those trucks are killer. I don't think I could pick a fave!

I'm a Chevy/GMC guy too. I've got like 9 C-10's, 3 K-20's, K-30 & C-30,
C-60 dump, and a couple S-10's around the place. I do like the 60 vintage Ford's though. I would have to pick the C-10 in the picture above.

**67cheby** · 02-18-2012, 11:03 AM

cool shot, C10 deff ......WINNING !!

12-20-2011, 04:36 PM	#1
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Dropmembered trucks __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-20-2011, 04:38 PM	#3
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Dropmembered trucks Thanks for the response nate. So all geometry is identical between all versions, Its just asthetic improvements between versions? From the cell phone pics i saw, it looked to be a 3.2 with tube setup. Are there any differences in your arms(versions) or any designators to tell me what version they are? thanks again __________________ Hard work has a future payoff. Laziness pays off now. My Build

12-20-2011, 05:14 PM	#5
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Dropmembered trucks So it would be safe to assume that if these arms are mated with your DM that they are the narrowed arms? I hope so because thats what i want. I think I need to see this thing and give you a call. I really appreciate all your help with my questions. __________________ Hard work has a future payoff. Laziness pays off now. My Build

12-20-2011, 05:45 PM	#7
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Dropmembered trucks RIGHT ON! I didnt know the DM Narrowed already. Thanks! __________________ Hard work has a future payoff. Laziness pays off now. My Build

12-20-2011, 06:18 PM	#9
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Dropmembered trucks ^^^^ That truck blows my mind every time i see it!!! Absolutely Beautiful __________________ Hard work has a future payoff. Laziness pays off now. My Build

12-20-2011, 10:54 PM	#10
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: Dropmembered trucks x2 __________________ Chevy Only Tx.........

12-21-2011, 09:04 AM	#11
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Re: Dropmembered trucks SUPERFLY! That is all! Posted via Mobile Device __________________ Flowershop Hip Hop & Street Rods Dropmember 83 Custom Deluxe Almond on Almond 85 Silverado White on Red/Now Chevy LeMans Blue Rendering in Truckin magazine vol 36 no. 11,2010

12-28-2011, 04:48 PM	#12
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Dropmembered trucks $400 a wheel, should have all sorts of options. I am looking at spending $400 for the SET. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

12-28-2011, 05:46 PM	#13
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Dropmembered trucks Centerline you can get most 20's for @$300 22 @$400 Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

12-28-2011, 07:12 PM	#14
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Dropmembered trucks centerline, coys, american racing, etc. I'm sure there are a few others. __________________ Doug Looking for a 67-72 short bed driver.....

12-28-2011, 10:26 PM	#15
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Re: Dropmembered trucks Got 20 in Coys chrome for my dads truck for about 1500 and a set of nittos for a 1000 Posted via Mobile Device __________________ Flowershop Hip Hop & Street Rods Dropmember 83 Custom Deluxe Almond on Almond 85 Silverado White on Red/Now Chevy LeMans Blue Rendering in Truckin magazine vol 36 no. 11,2010

02-15-2012, 08:56 PM	#16
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: Dropmembered trucks Does the alternater hit the rack on the ls1's ? What set up are you guys running

02-18-2012, 10:19 AM	#20
realnice1s Registered User Join Date: Oct 2009 Location: Martucky Il. Posts: 54	Re: Dropmembered trucks C-10 vs. F100 Attached Images

02-18-2012, 11:03 AM	#25
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Dropmembered trucks cool shot, C10 deff ......WINNING !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.