PROJECT "Father/Son" C-20 Rolling Chassis Build - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rcrahn · 05-14-2013, 12:08 AM

Quote:

Originally Posted by ChiefRocka

NICE SCORE !!

CL is awesome at times, take this past weekend.....I needed an office desk for my shop ... Saturday morning performing shop clean up, Rich found an office desk for free, in town. Turned out to be a nice, 'heavy' office desk...looking good now !

(sorry to hi jack)

Yep, $150 for the fans. Retail for $365.
I need some 4 core radiator brackets (upper and lower) for the Griffin crossflow I am planning on. Got any?

rcrahn · 05-27-2013, 10:53 AM

Quick update:
1. Finished welding up plate for DBW gas pedal
2. Checked fit of SSR exhaust manifolds - with C20 frame so fat on top I needed to clearance a little on the passenger side. They will now be taken locally for ceramic coating.
3. Had fuel injectors cleaned, rebuilt and tested by Dr. Injector. Good thing too cause when I pulled them there was gas still in fuel rails - 4 year old nasty stuff. Squirted carb cleaner in, swished around and blew out with airgun.
4. Opened up hole in firewall for the new AAW classic update fuse block. This kit is sooooo nice.
5. Purchased stock AC vents (center and 2 ball vents) and 4 core radiator hold downs.

**ChiefRocka** · 05-27-2013, 11:19 AM

Quote:

Originally Posted by rcrahn

Yep, $150 for the fans. Retail for $365.
I need some 4 core radiator brackets (upper and lower) for the Griffin crossflow I am planning on. Got any?

Quote:

Originally Posted by rcrahn

Quick update:
1. Finished welding up plate for DBW gas pedal
2. Checked fit of SSR exhaust manifolds - with C20 frame so fat on top I needed to clearance a little on the passenger side. They will now be taken locally for ceramic coating.
3. Had fuel injectors cleaned, rebuilt and tested by Dr. Injector. Good thing too cause when I pulled them there was gas still in fuel rails - 4 year old nasty stuff. Squirted carb cleaner in, swished around and blew out with airgun.
4. Opened up hole in firewall for the new AAW classic update fuse block. This kit is sooooo nice.
5. Purchased stock AC vents (center and 2 ball vents) and 4 core radiator hold downs.

Great to see progress !!!

Looks like u are getting one step closer to fire ....

Sorry, all my parts consist of only the "dark side" 60-66 stuff, but looks like those are on their way.

Great Job !
Posted via Mobile Device

ChazCurry · 08-16-2013, 09:31 PM

Looking to do the same thing to my 72 c20.what year rear end did they use for the 8lug with coils
Posted via Mobile Device

watahyahknow · 08-16-2013, 10:24 PM

14 bolt? http://www.pirate4x4.com/tech/billavista/14b_bible/

**ChiefRocka** · 10-20-2013, 12:01 PM

Any updates from the team ??

rcrahn · 10-20-2013, 07:04 PM

Quote:

Originally Posted by ChiefRocka

Any updates from the team ??

Well, things are moving at a slow pace...due to life getting in the way and other interests - such as the son wanting to build a SpecE30 (pics below), getting a dog, and having a girlfriend. But hope remains to finish. Here's what I can show...

Cut holes for AC vents....it went well

Cut and driller floor for high hump cover

Test fit radiator, made 1/4" spacers to sit below upperbrackets.

Fabricated battery tray for passenger side...not finished. It's dangerous work cutting metal with sparks flying onto polyester shorts which burn... Like having roasted chestnuts....I retired these shorts and they remain pinned on the wall as reminder to remember safety always.....

Justin's SpecE30 at Thunderhill Raceway - Willows, CA

watahyahknow · 10-20-2013, 07:49 PM

not only poliester catches fire . i had my huevenas cooked in a coverall that caught fire grinding on a weld while standing with my legs apart
didnt noticed it untill i smelled sumting burning
running around like my ass"s on fire never was more true than that day , peeing in my pants as damage controll was starting to look like a verry good idea

rcrahn · 03-23-2014, 08:44 AM

Latest update..... Had the tilt column rebuilt by Kevin. Looks great!
Ordered booster bracket from CaptainFab, awesome piece!
Purchased 9" Dual diaphram booster with MC from Power Brake Exchange in San Jose. Setup looks great. This will create 250-300 psi added braking power over 11" booster.
Lastly, worked with a talented you man who did some digital renderings for a 2 tone paint scheme. I've printed these up and posted them around the garage just for that added inspiration to keep going and finish. Yes, it will get finished....Here's some pics....Please...no copy cats!

**ChiefRocka** · 03-23-2014, 11:01 AM

Pretty sharp !!!

Brakes look good .....

Did you ever think about hydroboost ??

We've done quite a few hydroboost setups at my shop ..... phenomenal upgrade !

That black 61 Parkwood had basically stock g body rotors and a cheap Chrome booster. We tried everything to get it to stop.

After adding the hydroboost, is was insane how much brake power was had.

Face through windshield was an understatement.

Also, im sure you must know by now .... ACC has been open for almost two years !!

Aren't you proud of me ??

rcrahn · 03-23-2014, 10:29 PM

What am I proud of? I caught this large mouth bass on the Delta recently....

**ChiefRocka** · 03-24-2014, 09:58 AM

Quote:

Originally Posted by rcrahn

What am I proud of? I caught this large mouth bass on the Delta recently....

Must of taken allll day for you to get that tiny thing in the boat, huh ?

rcrahn · 03-24-2014, 05:24 PM

Quote:

Originally Posted by ChiefRocka

Must of taken allll day for you to get that tiny thing in the boat, huh ?

Look at those enormous fins!!!! I swear it was part sailfish with the heart and fight of a tuna. Once I released it I popped a cold one....My day was done...

**ChiefRocka** · 07-07-2016, 12:42 AM

Quote:

Originally Posted by rcrahn

Look at those enormous fins!!!! I swear it was part sailfish with the heart and fight of a tuna. Once I released it I popped a cold one....My day was done...

Speaking of being done ....

How is this project going !?!?!

**KevinK7** · 03-09-2018, 02:55 PM

Another old post to bring back

I sure ain't going this far, but WOW! ...a ton of work in this truck...

**ChiefRocka** · 03-09-2018, 08:47 PM

Quote:

Originally Posted by KevinK7

Another old post to bring back

I sure ain't going this far, but WOW! ...a ton of work in this truck...

Yes indeed !!

Wonder what ever happen to the dynamic duo ?

rcrahn · 07-30-2020, 11:31 AM

Almost 13 years ago to this day this 67C20 project started. Over that period so much has happened. And not happened. With life and the project. Y'all know what I'm referring to. I did not want to see the project die and be sold off like so many are. I was determined to at the very least finish the wiring and hear it run. Better yet to drive it.
Now here's the amazing part. It was accomplished. With the help of John Oliveria and Rich Deans - owners of American Customs and Classics in Hollister CA.
They did great job! What's really cool to think about is the fact this project started 13 years ago with John working on the frame and air suspension in the back of a makeshift shop working after hours from his regular job. Today, he and Rich are running a thriving business. Enthusiasts from around the Bay Area are sending their cars and trucks to them. Their work is top notch.
So, the truck was at their shop for 3 weeks. Daily I received several text updates with pictures of the progress. I gave them a budget and they met it. I will share pictures of John's work in the coming days.
I cannot express how overwhelmed I was to hear the 2003 LQ9 come to life. Yes, the same motor that John and I did a road trip to get in Pomona CA in Jan 2009! When I picked up the truck July 27th I drove it around the parking lot. Talk about some history and going full circle.....

Let's pick things up on July 6th 2020.....Heading to ACC Hollister

rcrahn · 07-31-2020, 09:51 AM

Okay, not a single comment....I will go straight to the ending

https://vimeo.com/443060547
https://vimeo.com/443382425

Low Elco · 07-31-2020, 09:58 AM

I was just waiting for the meat of the story!

SCOTI · 07-31-2020, 10:26 AM

Quote:

Originally Posted by rcrahn

Okay, not a single comment....I will go straight to the ending

Lots of us watched this build & it has been a while since updates so it might take a minute before people leave comments.

I saw the post yesterday & read it but the text within suggested there were more pics & story to follow so I was waiting for it....

**1971Stepside** · 07-31-2020, 10:35 AM

Quote:

I will go straight to the ending

Wow! OK. If you need immediate gratification you should post on Instagram or FB. I watch these build threads a lot, but don't always comment. I can tell people do the same on my build thread by the number of views. I like the comments and feedback, but I don't expect it. I was like the others above, I thought more was soon to follow.

rcrahn · 08-09-2020, 04:55 PM

Some pictures as it now sits. That's an 8 ft surfboard in the bed. Fits no problem. Maybe this truck should be named Longboard....

**KevinK7** · 08-09-2020, 10:21 PM

...as others have noted, I was awaiting more updates so held on commenting. None-the-less, the truck looks great! These projects take time, ...and often take many years to finish. The simple reality is ...life gets in the way.

rcrahn · 08-10-2020, 12:38 AM

Here are pictures of the AAW Classic Update Kit being installed. Starting up front with the headlights. Preparing the electric fans. Tying in the thinned LQ9 harness and extending the wiring on OBDII port to mount inside the cab, under the dash, so it can communicate to the Dakota Digital VHX dash

cornerstone · 08-10-2020, 12:39 AM

Congratulations! I'd love to see more of the details as well as any future work that gets done

05-27-2013, 10:53 AM	#352
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Quick update: 1. Finished welding up plate for DBW gas pedal 2. Checked fit of SSR exhaust manifolds - with C20 frame so fat on top I needed to clearance a little on the passenger side. They will now be taken locally for ceramic coating. 3. Had fuel injectors cleaned, rebuilt and tested by Dr. Injector. Good thing too cause when I pulled them there was gas still in fuel rails - 4 year old nasty stuff. Squirted carb cleaner in, swished around and blew out with airgun. 4. Opened up hole in firewall for the new AAW classic update fuse block. This kit is sooooo nice. 5. Purchased stock AC vents (center and 2 ball vents) and 4 core radiator hold downs. Attached Images

08-16-2013, 09:31 PM	#354
ChazCurry Registered User Join Date: Mar 2013 Location: terrell tx Posts: 7	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Looking to do the same thing to my 72 c20.what year rear end did they use for the 8lug with coils Posted via Mobile Device __________________ ♥♦♣♠

08-16-2013, 10:24 PM	#355
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build 14 bolt? http://www.pirate4x4.com/tech/billavista/14b_bible/ __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-20-2013, 12:01 PM	#356
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Any updates from the team ?? __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-20-2013, 07:49 PM	#358
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build not only poliester catches fire . i had my huevenas cooked in a coverall that caught fire grinding on a weld while standing with my legs apart didnt noticed it untill i smelled sumting burning running around like my ass"s on fire never was more true than that day , peeing in my pants as damage controll was starting to look like a verry good idea __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

03-23-2014, 08:44 AM	#359
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Latest update..... Had the tilt column rebuilt by Kevin. Looks great! Ordered booster bracket from CaptainFab, awesome piece! Purchased 9" Dual diaphram booster with MC from Power Brake Exchange in San Jose. Setup looks great. This will create 250-300 psi added braking power over 11" booster. Lastly, worked with a talented you man who did some digital renderings for a 2 tone paint scheme. I've printed these up and posted them around the garage just for that added inspiration to keep going and finish. Yes, it will get finished....Here's some pics....Please...no copy cats! Attached Images

03-23-2014, 11:01 AM	#360
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Pretty sharp !!! Brakes look good ..... Did you ever think about hydroboost ?? We've done quite a few hydroboost setups at my shop ..... phenomenal upgrade ! That black 61 Parkwood had basically stock g body rotors and a cheap Chrome booster. We tried everything to get it to stop. After adding the hydroboost, is was insane how much brake power was had. Face through windshield was an understatement. Also, im sure you must know by now .... ACC has been open for almost two years !! Aren't you proud of me ?? __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-23-2014, 10:29 PM	#361
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build What am I proud of? I caught this large mouth bass on the Delta recently.... Attached Images

03-09-2018, 02:55 PM	#365
KevinK7 Senior Member Join Date: Oct 2017 Location: Hudson Valley, New York Posts: 649	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Another old post to bring back I sure ain't going this far, but WOW! ...a ton of work in this truck...

07-30-2020, 11:31 AM	#367
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Almost 13 years ago to this day this 67C20 project started. Over that period so much has happened. And not happened. With life and the project. Y'all know what I'm referring to. I did not want to see the project die and be sold off like so many are. I was determined to at the very least finish the wiring and hear it run. Better yet to drive it. Now here's the amazing part. It was accomplished. With the help of John Oliveria and Rich Deans - owners of American Customs and Classics in Hollister CA. They did great job! What's really cool to think about is the fact this project started 13 years ago with John working on the frame and air suspension in the back of a makeshift shop working after hours from his regular job. Today, he and Rich are running a thriving business. Enthusiasts from around the Bay Area are sending their cars and trucks to them. Their work is top notch. So, the truck was at their shop for 3 weeks. Daily I received several text updates with pictures of the progress. I gave them a budget and they met it. I will share pictures of John's work in the coming days. I cannot express how overwhelmed I was to hear the 2003 LQ9 come to life. Yes, the same motor that John and I did a road trip to get in Pomona CA in Jan 2009! When I picked up the truck July 27th I drove it around the parking lot. Talk about some history and going full circle..... Let's pick things up on July 6th 2020.....Heading to ACC Hollister Attached Images

07-31-2020, 09:51 AM	#368
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Okay, not a single comment....I will go straight to the ending https://vimeo.com/443060547 https://vimeo.com/443382425 Last edited by rcrahn; 07-31-2020 at 10:16 AM. Reason: added 2nd video

07-31-2020, 09:58 AM	#369
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build I was just waiting for the meat of the story! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-09-2020, 04:55 PM	#372
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Some pictures as it now sits. That's an 8 ft surfboard in the bed. Fits no problem. Maybe this truck should be named Longboard.... Attached Images

08-09-2020, 10:21 PM	#373
KevinK7 Senior Member Join Date: Oct 2017 Location: Hudson Valley, New York Posts: 649	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build ...as others have noted, I was awaiting more updates so held on commenting. None-the-less, the truck looks great! These projects take time, ...and often take many years to finish. The simple reality is ...life gets in the way. __________________ '68 C20 Utility 396 4sp (BuildThread: http://67-72chevytrucks.com/vboard/s...d.php?t=806904 ) '68 C10 50th

08-10-2020, 12:38 AM	#374
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Here are pictures of the AAW Classic Update Kit being installed. Starting up front with the headlights. Preparing the electric fans. Tying in the thinned LQ9 harness and extending the wiring on OBDII port to mount inside the cab, under the dash, so it can communicate to the Dakota Digital VHX dash Attached Images



Register or Log In To remove these advertisements.

08-10-2020, 12:39 AM	#375
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Congratulations! I'd love to see more of the details as well as any future work that gets done __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

Register or Log In To remove these advertisements.