1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1) - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

E911manager · 09-17-2013, 10:55 AM

Here is a closeup of the fuel neck.

I know I know why not just tub it and bring it all down to the same level.

Well My thought is the tail gate is welded shut so custom recessed areas would be different.

Maybe!!!

Also I will use the fiberglass cover!!! Probably going to have it all lined with "White" spray in bed liner..

**pimpston65** · 09-20-2013, 12:40 AM

Quote:

Originally Posted by E911manager

Here is a closeup of the fuel neck.

I know I know why not just tub it and bring it all down to the same level.

Well My thought is the tail gate is welded shut so custom recessed areas would be different.

Maybe!!!

Also I will use the fiberglass cover!!! Probably going to have it all lined with "White" spray in bed liner..

your build is bad a$$, you just opened my eyes to soo many possiblities for front end hell full roller swap, anyway i noticed you have a chrome trim round your BBW is that a factory piece or just and aftermarket kit. i've seen only one, but when i went to get a further look couldnt find the website.

E911manager · 09-20-2013, 11:46 AM

Quote:

Originally Posted by pimpston65

your build is bad a$$, you just opened my eyes to soo many possiblities for front end hell full roller swap, anyway i noticed you have a chrome trim round your BBW is that a factory piece or just and aftermarket kit. i've seen only one, but when i went to get a further look couldnt find the website.

That was an option that I was offered at Classic Chevy parts in OKC. It is just a chrome plastic covered rubber that spreads the gasket out. The glass guys scuffed it in a few places getting it in and I will rework it later. The glass was very tight because of the BBW kit I didnt want to take to much off and have leaks..

**pimpston65** · 09-20-2013, 03:50 PM

Quote:

Originally Posted by E911manager

That was an option that I was offered at Classic Chevy parts in OKC. It is just a chrome plastic covered rubber that spreads the gasket out. The glass guys scuffed it in a few places getting it in and I will rework it later. The glass was very tight because of the BBW kit I didnt want to take to much off and have leaks..

ok cook thks it will match my front stainless
Posted via Mobile Device

Average Joe · 09-20-2013, 08:10 PM

Very cool build. I admire your determination. Cant wait to see it done!

E911manager · 09-20-2013, 09:42 PM

Quote:

Originally Posted by Average Joe

Very cool build. I admire your determination. Cant wait to see it done!

Thanks Average Joe... It has been a ton of fun so far..

E911manager · 09-23-2013, 02:30 PM

Drove the Caprickup to Sonic yesterday.. Runs and drives great... Just need to get the body work done... I also added the spare tire hole in the rasied bed and finished up the gas neck..

shok · 09-23-2013, 04:06 PM

nice to see its on the road

E911manager · 10-22-2013, 11:03 AM

Still slow going, but have been driving around town. Took it over to a friends house a couple of weeks ago. About a 20 mile trip. Purred like a kitten. Stopped by sonic and got a drink. I HATE BODY WORK... I would rather be fabbing up something....

C@rnut001 · 10-22-2013, 11:15 AM

It is sure looking good, keep up the amazing work. You are getting there and it is great that you are able to drive it on the street. Thanks for the updated photos.

E911manager · 10-22-2013, 11:19 AM

Quote:

Originally Posted by C@rnut001

It is sure looking good, keep up the amazing work. You are getting there and it is great that you are able to drive it on the street. Thanks for the updated photos.

Thanks C@rnut001, I need a week off work to focus on Eli, but that just isnt going to happen....

likaroc13 · 10-22-2013, 11:41 AM

Glad to hear it's running good! Hang in there. You're doing a nice job.

NEWFISHER · 10-22-2013, 02:44 PM

Quote:

Originally Posted by E911manager

Drove the Caprickup to Sonic yesterday.. Runs and drives great... Just need to get the body work done... I also added the spare tire hole in the rasied bed and finished up the gas neck..

Spare? you would be the hit of the campsite with some ice and a bunch of tall necks in that well!

E911manager · 10-22-2013, 02:54 PM

Quote:

Originally Posted by NEWFISHER

Spare? you would be the hit of the campsite with some ice and a bunch of tall necks in that well!

NewFisher, I like the way you think... I am adding a sunken ice chest into the bed too..

**Dieselwrencher** · 10-22-2013, 06:49 PM

Great work! It sure has come along way!

RockTonka · 10-23-2013, 02:14 AM

Are you going to make it out to Mufflers on Main in Blanchard on Sat.?

Greywolf200 · 10-23-2013, 10:25 AM

This thing is really looking good, keep up the good work.

aggie91 · 10-23-2013, 10:38 AM

Looking Good!

E911manager · 10-23-2013, 11:04 AM

Quote:

Originally Posted by RockTonka

Are you going to make it out to Mufflers on Main in Blanchard on Sat.?

Well, so far I plan on making it. There is still a small event called OU football, that I have to get out of working. I think I have everything covered but will not know until late Thursday.

E911manager · 10-23-2013, 11:07 AM

Quote:

Originally Posted by Greywolf200

This thing is really looking good, keep up the good work.

"Thing" its a Caprickup..

Thanks, I just need a few more open days..

E911manager · 10-23-2013, 11:08 AM

Quote:

Originally Posted by aggie91

Looking Good!

Thanks Aggie91.. just need a little more time...

E911manager · 10-23-2013, 11:09 AM

Quote:

Originally Posted by Dieselwrencher

Great work! It sure has come along way!

Thanks Dieselwrencher!!! I am ready to start driving to car shows. Looking for a 13-15 foot 60's style camper to start working on.. Want to pull it around the State..

Trsmotrhed · 11-16-2013, 01:08 PM

Just looked through your build. All I can say is WOW!. You've done an excellent job and defiantly thinking outside the box. Keep up the great work. Those LT1's run great. I love my fuel injection. So worth the work.

rustyrod2 · 01-04-2014, 11:32 PM

any pics of steering shaft

Trsmotrhed · 01-05-2014, 12:05 AM

Any updates?

09-17-2013, 10:55 AM	#351
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Here is a closeup of the fuel neck. I know I know why not just tub it and bring it all down to the same level. Well My thought is the tail gate is welded shut so custom recessed areas would be different. Maybe!!! Also I will use the fiberglass cover!!! Probably going to have it all lined with "White" spray in bed liner.. Attached Images __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

09-20-2013, 08:10 PM	#355
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** Very cool build. I admire your determination. Cant wait to see it done!

09-23-2013, 02:30 PM	#357
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Drove the Caprickup to Sonic yesterday.. Runs and drives great... Just need to get the body work done... I also added the spare tire hole in the rasied bed and finished up the gas neck.. Attached Images __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

09-23-2013, 04:06 PM	#358
shok Registered User Join Date: May 2012 Location: Salinas, Ca Posts: 299	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** nice to see its on the road __________________ 1966 C10 250 with 3 on the tree Build Thread Bunch of other cars no one cares about

10-22-2013, 11:03 AM	#359
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Still slow going, but have been driving around town. Took it over to a friends house a couple of weeks ago. About a 20 mile trip. Purred like a kitten. Stopped by sonic and got a drink. I HATE BODY WORK... I would rather be fabbing up something.... Attached Images __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

10-22-2013, 11:15 AM	#360
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) It is sure looking good, keep up the amazing work. You are getting there and it is great that you are able to drive it on the street. Thanks for the updated photos. __________________ C@rnut001 (Owen) Alaskan Members Check In** http://67-72chevytrucks.com/vboard/s...22#post5094422 http://67-72chevytrucks.com/vboard/s...18#post6778618

10-22-2013, 11:41 AM	#362
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Glad to hear it's running good! Hang in there. You're doing a nice job. __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides:** 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

10-22-2013, 06:49 PM	#365
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Great work! It sure has come along way! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out.**

10-23-2013, 02:14 AM	#366
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** Are you going to make it out to Mufflers on Main in Blanchard on Sat.? __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

10-23-2013, 10:25 AM	#367
Greywolf200 Registered User Join Date: Jan 2011 Location: Mount Airy, NC Posts: 132	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** This thing is really looking good, keep up the good work. __________________ Jack Byrd '70 Chev Custom SWB(new to me), 307CID(added Weiand Stealth, headers and Edelbrock Performer carb, up to 17 MPG now), 700R4 '76 Airstream Argosy MH(want a longer one), 454CID, TH400

10-23-2013, 10:38 AM	#368
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** Looking Good! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

11-16-2013, 01:08 PM	#373
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** Just looked through your build. All I can say is WOW!. You've done an excellent job and defiantly thinking outside the box. Keep up the great work. Those LT1's run great. I love my fuel injection. So worth the work. __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

01-04-2014, 11:32 PM	#374
rustyrod2 Registered User Join Date: Dec 2013 Location: irvine ky Posts: 2	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** any pics of steering shaft

01-05-2014, 12:05 AM	#375
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** Any updates? __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.