Donz '65 SWB Stepper Budget Build...

[jlsanborn]

Cards turned out great!

[Ta2Don]

Thanks Man, talked to Bomp last night, he really enjoyed meeting and talking to you at Goodguys... Do you have any pics of your son's S10 posted?
Posted via Mobile Device

[markeb01]

I really like the card revision, it flows much nicer. I had to do mine over several times before I was happy with the layout. (And now I'm going to have to do it over again)!

I was also surprised how handy they turned out to be. At the recent Goodguys event I handed out all the cards in my shirt pocket and had to get more out of the glove box. And they only went to other 60-66 truck owners, figuring they might be inspired to stop by. Some had even been on the site, but couldn't remember which one it was.

[Ta2Don]

Thanks Mark! I really like promoting this site... The people and info here is what motivated me to go from, "I'm gonna drop a motor in and drive..." to where I am now! I'm not setting a date for the first drive but I hope it will be sooner than later...
Posted via Mobile Device

[Ta2Don]

Originally Posted by clemdaddy

i like the way this is heading... you being a recruiter and all.
i'm gonna have to make me some cards.

Nice!!!
When is get-together planned?
Posted via Mobile Device

[Ta2Don]

About to head out into the heat to get some truck time in...

Here's a pic I snapped yesterday of the Hood Ornament resting on da Hood! Which is resting on da Bed...
Uploaded with ImageShack.com

Will update more later...

[65truckowner]

I was planning on working on my bed today and found out I order bed strips for a stepside instead of fleetside so I did what I could and reorder the right strips. I have a brand new set for a stepside already painted black if you know anyone who might need them.

[Ta2Don]

Originally Posted by 65truckowner

I was planning on working on my bed today and found out I order bed strips for a stepside instead of fleetside so I did what I could and reorder the right strips. I have a brand new set for a stepside already painted black if you know anyone who might need them.

I have new ones already, if I hear of anyone in need I will shoot ya a PM...

[Ta2Don]

My weekend started off with replacing a toilet fill valve
and continued with my Laptop going on vacation... well, the Hard drive decided it was tired and during an upload of a new OS the drive pulled an Elvis, yes folks it has left the building, er case or whatever the appropriate term is...

Time for some Truck time therapy...

Bear with me as I outline my therapy session with pics...

I really didn't accomplish much in the way of real progress on the truck, I checked out the new to me driveshaft, it is gonna need about an inch and a half removed... Decided on the location for the 56 Chevy Hood Ornament... Since my plans for paint call for a Faux-tina outcome, the pitted Hood Ornament is going to retain it's character via the pitting...started some frame cleaning in preparing for the frame paint... found a second VIN punched on the left frame rail, where it will be located under the cab, along with the one stamped in near the front crossmember on the same rail, forgot to snap a pic...

The heat and humidity slowed me brain processes down, maybe I need to replace my hard drive?

Recently I had a friend traded me a Blue Point Toolbox and a bunch of Blue Point Sockets... So, Clean and inventory the sockets, repair the bottom drawer of the cart, and here we are...
Uploaded with ImageShack.com
Uploaded with ImageShack.com

Remember this? (Hint - Post #300)
Uploaded with ImageShack.com

After some cutting...
Uploaded with ImageShack.com

a little mock up...
Uploaded with ImageShack.com

Let's melt some METAL!!!
Uploaded with ImageShack.com
Uploaded with ImageShack.com

and, Viola...
One semi finished Welding Cart, thanks to the sacrifice of a defunct shopping cart...
Uploaded with ImageShack.com
Uploaded with ImageShack.com

Still need to add a handle and finish securing the Gas Bottle...

Therapy Session for today, Complete!

Thanks for looking Guyz & Galz!!! Hope you had a weekend!

[Jmorales3181]

That's awesome and is kind of low profile!
Posted via Mobile Device

[Ta2Don]

Thanks JMo!!!
After reading your post, my first thought, "I could lower it."
Dang, now I have that running through my brain, Thanks Man!

Well, stay tuned cuz ya never know...

[Ta2Don]

Not much accomplished today except...






Have a Great Labor Day!!!

[Alan's Classic]

Very cool model. I saw models the other day and they were 19.95. Wow. There weren't any trucks.
Posted via Mobile Device

[Ta2Don]

Thanks Alan...
Ordered this one online about a year ago, thinking it was about $17 with shipping...

[markeb01]

Nice clean build on the truck model. Is that what your truck is going to look like? I've never gotten away from building models, but have to be in the right frame of mind to get motivated. If I have "real" stuff to work on it's hard to focus, so most of the miniature progress is accomplished in the winter.

[Ta2Don]

Originally Posted by markeb01

Nice clean build on the truck model. Is that what your truck is going to look like? I've never gotten away from building models, but have to be in the right frame of mind to get motivated. If I have "real" stuff to work on it's hard to focus, so most of the miniature progress is accomplished in the winter.

I'm the same way when it comes to the miniature work... Since our winters here are normally non-existent for a good part of that season, I picked one of the hottest days this year to finish up what I started last summer...
My truck should look similar, except the grill and bumpers are gonna end up Flat White, and I'm considering doing the roof Flat White as well...

Thanks for checking in and am looking forward to more Car Show pics and hearing that the stalling issue has been resolved!

[da_bears_da1]

Very nice score on the tools! I also liked the new welding cart and always good to see sparks flying.

Keep that model within viewing distance and I am sure it will motivate you.

Thanks again for the offer on the bed strips! You are one good dude!

[Grizz1963]

Originally Posted by Ta2Don

Not much accomplished today except...






Have a Great Labor Day!!!

Second time I have taken the time to read through your thread Don.

It made me giggle the first time, and tonight again.

I have to say, your hood ornament is 100% cool, but the model for sensible money has made me post a reply.

Love the odd bits you post, and the way your head works.

[Ta2Don]

Originally Posted by da_bears_da1

Very nice score on the tools! I also liked the new welding cart and always good to see sparks flying.

Keep that model within viewing distance and I am sure it will motivate you.

Thanks again for the offer on the bed strips! You are one good dude!

Thanks Jeff... Sure hope all works out for your trip this way later this month...

Originally Posted by Grizz1963

Second time I have taken the time to read through your thread Don.

It made me giggle the first time, and tonight again.

I have to say, your hood ornament is 100% cool, but the model for sensible money has made me post a reply.

Love the odd bits you post, and the way your head works.

Thanks Grizz, doing some research on FaceTime... will talk with you soon... and if you have figured out how my head works, please let me know...

[Jmorales3181]

Nice model Don! Makes me want to go mess with mine a bit. U def have to do the grill like you did the real one on your truck
Posted via Mobile Device

[Ta2Don]

Thanks JMo, gotta go back and do some mods to reflect the ideas for my 65...
Thanks for the prodding...

[Ta2Don]

Originally Posted by Ta2Don

I really didn't accomplish much in the way of real progress on the truck, I checked out the new to me driveshaft, it is gonna need about an inch and a half removed... Decided on the location for the 56 Chevy Hood Ornament... Since my plans for paint call for a Faux-tina outcome, the pitted Hood Ornament is going to retain it's character via the pitting...started some frame cleaning in preparing for the frame paint... found a second VIN punched on the left frame rail, where it will be located under the cab, along with the one stamped in near the front crossmember on the same rail, forgot to snap a pic...

Here's a pic or two of the aforementioned 2cd VIN...


Here's a pic looking from the 2cd one up to the first one on the left frame rail...


Laterz

[BOXER957]

Just read through your build. it sounds like your having fun and enjoying learning, making new friends and at the same time turning out a nice looking ride. One day at a time, every little step gets us that much closer. I'll check back on you now and then, make sure you're not slacking. Awesome door art! Keep the sparks flying and you'll be grinnin and spinnin in no time.

[clemdaddy]

Originally Posted by Ta2Don

Nice!!!
When is get-together planned?
Posted via Mobile Device

we're looking at the 3rd weekend in October... Going to Nawlins the first week then a week back to plan and make it happen. will look at the calendar and get back to you with the date. my, how time flies.

dig the welding cart... good noodlin' going on there.

[Ta2Don]

Originally Posted by BOXER957

Just read through your build. it sounds like your having fun and enjoying learning, making new friends and at the same time turning out a nice looking ride. One day at a time, every little step gets us that much closer. I'll check back on you now and then, make sure you're not slacking. Awesome door art! Keep the sparks flying and you'll be grinnin and spinnin in no time.

Thanks Man,
Slackin' a bit during the Arkansas Summer heat that finally showed up...
Lookin' to finally get the frame painted this weekend...

Originally Posted by clemdaddy

we're looking at the 3rd weekend in October... Going to Nawlins the first week then a week back to plan and make it happen. will look at the calendar and get back to you with the date. my, how time flies.

dig the welding cart... good noodlin' going on there.

Thanks Clem, lookin' forward to the get-together!