![]() |
![]() |
#351 |
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,560
|
Re: Softop installation no Holes
Pop-up? Do Tell!
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
![]() |
![]() |
![]() |
#352 |
Registered User
Join Date: Jul 2016
Location: KIRKLAND, WA
Posts: 30
|
Re: Softop installation no Holes
Does anyone have a picture of the header with a bikini top? I am thinking about buying a header for a bikini top.
|
![]() |
![]() |
![]() |
#353 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
Yes the pop up I'm building keeps the roll bar installation intack and it utilizes the Headers I produce to add support . The whole unit is sumbrella and the pop up will have to same look as the original popups. I have the top frame section section finished just need to finish the supports over the quarter panels and then start sewing the sumbrella and windows in. My version will gain access to the pop up straight up from the drivers seat and passenger seat. Don't want to sell the farm completely just so hope to get busy on it on the next couple weeks if the weather permits LOL .
|
![]() |
![]() |
![]() |
#354 |
Registered User
Join Date: May 2014
Location: Saluda, SC
Posts: 61
|
Re: Softop installation no Holes
Do you have to drill both holes or will the hole that holds the L-bracket be enough support. Thanks Mickey
|
![]() |
![]() |
![]() |
#355 |
Registered User
Join Date: May 2014
Location: Saluda, SC
Posts: 61
|
Re: Softop installation no Holes
Also do you use button head bolts for the sun visor holes. If so do they eventually wear into the soft topper fabric. Thanks again Mickey
|
![]() |
![]() |
![]() |
#356 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
I used all the original bolts that where part of my Blazer i.e. The sun visor bolts are a He same bolts for the hard top
|
![]() |
![]() |
![]() |
#357 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
Also you only need to drill into he holes you into ntend to use i.e. I only drilled one hole in each center bracket and the obvious sun visor holes . Unless you are installing the "bracket" for the bracket that will seal the driver/door passenger door . Hope that answered your question Regards Rob
|
![]() |
![]() |
![]() |
#358 |
Registered User
Join Date: Apr 2007
Location: san francisco
Posts: 446
|
Re: Softop installation no Holes
Still interested....these available?
|
![]() |
![]() |
![]() |
#359 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
Finally had time to finish my header to the fashion I was expecting and it came out pretty good but my take another shot at it because I can LoL
|
![]() |
![]() |
![]() |
#360 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
Attaching pictures has changed
|
![]() |
![]() |
![]() |
#361 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
Gel coat color matched nearly perfect
|
![]() |
![]() |
![]() |
#362 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
Just need to add the last two missing snaps and it's done. Notice the profile is low and when the softopper is on its virtually undetectable
|
![]() |
![]() |
![]() |
#363 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
Carving or sculpting around the door swing path (vent window) is important to keep close. I will try to get closer picture
|
![]() |
![]() |
![]() |
#364 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
Before sculpting around door swing and after sculpting
|
![]() |
![]() |
![]() |
#365 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
To get good clean lines your installation may need to be trimmed to the shape of your truck at each end breaking sharp edges around the door and window seals and again along the rain gutter. Provide adequate clearance to prevent chafing . Door Seals seem to have variations and preferences . First place the Header on top of the windshield . Gently push down at each end simultaneously until the Header bottoms out at the mounting locations (each visor location). Briefly check that the two center brackets are also at the correct side to side you may be able to shift it side to side for best location . Then go drill the 5/16 holes holes and drop the bolts into each hole at each sun visor then proceed to drill the center bracket holes by pushing down on the Header till It bottoms square to the two center bracket locations. (I used one hole in each bracket) When Header is bolted down there should be no gaps under either of the four bolt down locations and should be squarely seated to he top of the windshield .
Refer to the softopper installation instructions for the softop installation of the 17 snaps . I personally used snaps that came with screws , marked the hole locations as accurately as possible with ink pen ,drilled the holes in the Header and tapped with self tapping screws . I then removed the screw and ground down the screw so it did not pertrude into the inside of the Header ,then installed the snap/ screw with locktite . Once you have drilled the location of the snaps you should gel coat the Header to your color match or finish to your own specs per normal auto body practices . I have personally gel coated twice sanding between each application and then painted on final or final gel coat . Once the Header is installed it should present with little to no visibility which my insurance company had no problems with as far as collector plates after understanding the delema of drilling holes in the mast . Hope your project comes out as expected and then some. I will be happy if I can be available during your install for questions . As far as I'm concerned this was a no brainer installation requirement for my Blazer and the applications this Header has in Making a custom chalet really helps knock the project into reality while trying to mentally invision what your trying to build. See my post for custom Chalet as that build progresses. |
![]() |
![]() |
![]() |
#366 |
Registered User
Join Date: Jul 2017
Location: Oklahoma
Posts: 57
|
![]()
I seen in some of the original post that these were going for $260. is that still the case? I have been doing some research on running a soft top year round and its looking more like a possibility. Anyone else run theirs year round in snow and rain? how is the protection? does it stay warm inside?
|
![]() |
![]() |
![]() |
#367 |
Registered User
Join Date: Mar 2015
Location: Fort Worth Texas
Posts: 279
|
Re: Softop installation no Holes
I dont have a soft top but I can tell you from other convertibles if you are in cold weather it will be cold!
Still need to get one! PG |
![]() |
![]() |
![]() |
#368 |
Registered User
Join Date: Apr 2017
Location: Coloma WI
Posts: 20
|
Re: Softop installation no Holes
robs71k5- can i get one?
|
![]() |
![]() |
![]() |
#369 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
Taxidermist check your in box
|
![]() |
![]() |
![]() |
#370 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
If your serious about purchasing this header please email me at srpenner@hotmail.com . I don't check this site as often as Id like to and winding down production
|
![]() |
![]() |
![]() |
#371 |
Registered User
Join Date: Apr 2017
Location: Coloma WI
Posts: 20
|
Re: Softop installation no Holes
|
![]() |
![]() |
![]() |
#372 |
Registered User
Join Date: Apr 2017
Location: Coloma WI
Posts: 20
|
Re: Softop installation no Holes
10-4
Last edited by The taxidermist; 08-03-2017 at 11:32 PM. |
![]() |
![]() |
![]() |
#373 |
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,560
|
Re: Softop installation no Holes
Please don't get discouraged. A lot of us still want them and are just hoping to find the funds. I was saving to get a hood but I cannot find one. Maybe I should just pull the trigger on this as you seem to be discontinuing the product. Reviews seem to be good and it appears to be a quality piece that not everyone would recognize. Truly custom. Hmm.
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
![]() |
![]() |
![]() |
#374 |
K5drive
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 809
|
Re: Softop installation no Holes
JJzepplin no worries I got you covered .
|
![]() |
![]() |
![]() |
#375 |
Robert Olson Transport
![]() Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,288
|
Re: Softop installation no Holes
Ive removed the bickering here. it needs to stop. Taxidermist youre new here this kind of stuff will get you banned and Robs71k5 if youre selling parts here regularly you need to be a vendor. Ive forwarded this to the parties that handle this if there is any more garbage posting threads locked suspensions handed out
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
![]() |
![]() |
![]() |
Bookmarks |
|
|