72 Dropmember Suburban

[CLTBurban]

That looks fantastic!!!

[5150]

I think the hand rails will make the seat look wider.

[blfuller123]

Originally Posted by 5150

I think the hand rails will make the seat look wider.

I think it will add a couple of inches to the width, I just have to punch the holes in the vinyl to put them on.

[5150]

I just think the perception will change of the backseat with them on.

[epon]

Awesome build, learned a ton reading through the thread. Can you post any pics or info on the garage paint spraying setup? What brand/type of paint was used?

[blfuller123]

Originally Posted by epon

Awesome build, learned a ton reading through the thread. Can you post any pics or info on the garage paint spraying setup? What brand/type of paint was used?

Thanks, the paint was just a house brand at the local paint supply place.

[blfuller123]

Got the air fittings in I ordered and picked up some more at the hydraulic shop while getting the leader hose made up. Got home an got the coalescing filter bracket made up and mounted and got all the fittings installed in the tank. Once I get the truck back on jack stands and ill finish up running the hose back to the tank.

Its about time to get my accuair ordered and I will probably order up my air conditiong soon too.

[lyrikz]

In this picture, isnt your alternator going to squeel like a pig when there is a load on it? There doesnt appear to be enough belt on that pulley.

Amazing build sir.

[zellway]

Looking good. Is your moisture trap a desiccant type?

[jkeating1]

Originally Posted by blfuller123

This is probably a stupid question, but what do you use that 2X4 with the big hole in it for? Looks like a high dollar special tool.

[blfuller123]

Originally Posted by jkeating1

This is probably a stupid question, but what do you use that 2X4 with the big hole in it for? Looks like a high dollar special tool.

It was actually what I used to prop up the york compressor when I was making up the bracket for it. It just never found it way back to the scrap wood pile I have.

[screaminchevypickup]

Looking good..

[hookedonchevys]

Thats one mean soundin Burb.Love the build.

[blfuller123]

Originally Posted by screaminchevypickup

Looking good..

Originally Posted by hookedonchevys

Thats one mean soundin Burb.Love the build.

Thank you!

Placed an order today at Laidbackrecreations for my gauges and my vintage air. Ordered the Dakota Digital VHX, the gps module, the light module, the air pressure module and the light controller, and I got the polished compressor with the vintage air. Hopefully UPS is getting the shipping thing fixed after the holidays.

[screaminchevypickup]

Thank for the business Brett..

[jkeating1]

What do the light module, and the light control module each do?

[blfuller123]

Originally Posted by screaminchevypickup

Thank for the business Brett..

Thanks for the great prices. I asked for package prices from a couple of places and you guys were over $100 cheaper than anyone else that I got a response from.

Originally Posted by jkeating1

What do the light module, and the light control module each do?

I guess the real name is the retained ACC Power with Headlight and Dome Light control. The module has a sensor on the dash and controls the headlights according to how dark it is and it dims the dome light light, and keeps the radio on until you open the door like the new cars do. It takes control of the lights so I got the dimmer knob to replace the factory headlight switch. I guess I was excited when I posted this, its just one module that does this. http://www.dakotadigital.com/index.c...prod/prd42.htm

Here is the GPS module http://www.dakotadigital.com/index.c...rod/prd837.htm

I got the module that will display the air pressure from the tank on the dash http://www.dakotadigital.com/index.c...rod/prd753.htm

The shift indicator module that displays the shifter position on the dash. The shift indicator is also a neutral safety switch and reverse light switch. http://www.dakotadigital.com/index.c...prod/prd60.htm

[jkeating1]

Thanks for the links---they build first class stuff! At SEMA in '12 I asked Dakota if they'd considered a module to control a remote radio head. I had a project I really didn't want to add a radio display in the dash on. I thought it would be great with a blue tooth receiver for an iPhone, etc. Unfortunately, that wasn't an application they were interested in!

[blfuller123]

Painless has a moudule that does the same as the dakota digital retained power that I was lookng at but it was about twice te price. I think it will be nice to have alot of th features the newer cars.

[blfuller123]

The UPS man came today

[builtbyKane]

Great progress

[CLTBurban]

Wow!!! Very nice!!!!!!

[blfuller123]

Originally Posted by builtbyKane

Great progress

Originally Posted by CLTBurban

Wow!!! Very nice!!!!!!

Thanks!!! I just got back home from out of town so nothing else is done. I did get some more of the Vintage Air parts in, just waiting on the compressor. The rest of the Dakota Digital parts im waiting on are suppose to ship on the 20th and my radiator is supposed to be here tomorrow.

[blfuller123]

My radiator came in, still waiting on brackets for it.

[screaminchevypickup]

Looks good!