Finally my own build thread! - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kyull67 · 11-12-2008, 10:06 PM

Can't wait to see it with all the metal on it!

jlaird · 11-12-2008, 11:29 PM

josh, this thing is so SICK. Makes mine look like a joke LOL.

Where did you get those blue bushings that you used on your exhaust hangers? Also, do you know how those magnaflow mufflers sound? I like the fact that they are small.

One more question, I noticed in one of your pics you have a metal plate on the cab mount rubber bushing on the forward drivers side. Are you leaving it there when you install the cab? I have taken two cabs off their frame and both had a shim on that cab mount.

abadsvt · 11-14-2008, 01:03 PM

Quote:

Originally Posted by jlaird

josh, this thing is so SICK. Makes mine look like a joke LOL.

Where did you get those blue bushings that you used on your exhaust hangers? Also, do you know how those magnaflow mufflers sound? I like the fact that they are small.

One more question, I noticed in one of your pics you have a metal plate on the cab mount rubber bushing on the forward drivers side. Are you leaving it there when you install the cab? I have taken two cabs off their frame and both had a shim on that cab mount.

Thanks for the complements jlaird! Your truck is pretty bad a$$ too! I got those blue exhaust bushings from IRONWORKS speed and kustom. I ordered my SPD exhaust tubing from them and I went over to there shop to pick it up and while i was there i saw those blue bushings. I asked if i could buy some and he hooked me up. Do you need a few? I could probably get you some. PM me if you do. Regarding that shim on the front cab bushing, yes i am using them for the front and rear of the cab mounts. When i ordered the cab mounts they came with these shims so i decided to use them. I heard the magnaflow mufflers sound great but i don't have any personal experience with them until now. They are pretty sweet since they tuck up into the frame and are flush with the bottom of the frame.

Josh

OLDIRON69 · 11-20-2008, 04:47 PM

Can't wait to see this finished.

OLDIRON69 · 11-20-2008, 04:49 PM

another one to keep your eyes peeled on..

abadsvt · 11-22-2008, 11:13 PM

Well i finally got enough time to get the truck outside and off the frame. It looks so different off the frame jig that i almost don't want to put it back on.

I was able to snap a few pics of the frame with the motor and 1/2 of the exhaust installed before it got too dark to take some more pics. I was able to get most of the sheetmetal on tonight so tomorrow i will take some more pics of the truck with the bed on, 1 door and 1 fender. I almost forgot. The new rear end fits perfect with my wheels. I have around 3/4" per side of clearance which is exactly what i wanted. Anyways here is some pics

Josh

gringoloco · 11-22-2008, 11:14 PM

Tease!

abadsvt · 11-22-2008, 11:18 PM

Well i finally got enough time to get the truck outside and off the frame. It looks so different off the frame jig that i almost don't want to put it back on.

I was able to snap a few pics of the frame with the motor and 1/2 of the exhaust installed before it got too dark to take some more pics. I was able to get most of the sheetmetal on tonight so tomorrow i will take some more pics of the truck with the bed on, 1 door and 1 fender. I almost forgot. The new rear end fits perfect with my wheels. I have around 3/4" per side of clearance which is exactly what i wanted. Anyways here is some pics

Josh

abadsvt · 11-22-2008, 11:20 PM

Quote:

Originally Posted by gringoloco

Tease!

whoops.

Forgot the pics

Painter D · 11-23-2008, 12:39 AM

Lookin good.

higgiec10 · 11-23-2008, 02:10 AM

all i can say is thats some nice goingto be a nice ride when done

abadsvt · 11-23-2008, 12:46 PM

Well i tried to get some decent pics of the truck with some sheetmetal but out of all the pics i only got 2 that came out. Since the sun is still rising it is reflecting off my truck. It look kind of angelic

. So later today when the sun isn't as bright i will snap a few more. I can't wait to see it painted, wood in the bed and so on. Being patient sucks

Josh

Crank · 11-23-2008, 01:23 PM

2nd picture looks like a model. But everything in aspect ratio. haha

nuke1 · 11-23-2008, 07:16 PM

WOW isall i caan say, nice job and well done!!!

abadsvt · 11-23-2008, 11:24 PM

Well i was had a few minutes and snapped a few more pics. I know they are almost the same pics as i already posted but i just love the how it is starting to look. I know i am

Josh

abadsvt · 11-23-2008, 11:27 PM

Last 2 pics. One of the pics is just showing the front bed mount i made.

Josh

ps. Just for everyones knowledge. If you get a pre 69 rear end the max recommended wheel backspacing is 4.5" on a 10" wide wheel. It won't fit on a 70 and up rear end. I learned that out the hard way. It leaves you just under 3/4" per side of clearance which should be plenty. Just sharing that info

kyull67 · 11-23-2008, 11:38 PM

Looks badass! What are you doing with the bedfloor?

abadsvt · 11-23-2008, 11:55 PM

Quote:

Originally Posted by kyull67

Looks badass! What are you doing with the bedfloor?

What bedfoor!

I am going to build my own wood floor for the truck. I have a fair amount of wood working tools so i was thinking about either curley maple, maybe walnut. Either way it is going to be a high gloss finish. If we get a shop soon i was hoping to start building the wood floor cause i really want to see it installed.

Josh

Raguemoe · 11-24-2008, 12:35 AM

Man I wish I had your skills. Looking good!!!

What's the best place to get Foose wheels and how much?

abadsvt · 11-24-2008, 03:27 PM

Quote:

Originally Posted by Raguemoe

Man I wish I had your skills. Looking good!!!

What's the best place to get Foose wheels and how much?

Thanks Raguemoe! I will look for my receipt to see what i paid and where i got them. I don't remember off the top of my head but they were great to do business with. I think with rims, tires and the cost to get them powdercoated came out to just $3500-3750 but that is just off the top of my head. I think i might have got too much backspacing for the front wheels. I haven't takin the time to adjust the steering so i can't be sure but i am a little worried.

You looking for a set of wheels? If mine don't work maybe we can work something out? You going to drop the white c10 or leave it as is?

Josh

abadsvt · 11-24-2008, 03:30 PM

Well i couldn't resist, i grabbed some nitrogen and aired up my truck to about ride height. It looks sick! I had to take some pics.

Josh

my67chevytruck · 11-24-2008, 04:09 PM

looking good bro!

Spray-Bomb · 11-24-2008, 04:12 PM

Oh, I so hate you !!! JK

I love it

jlaird · 11-24-2008, 05:22 PM

I think you need a little more sidewall....just my opinion though!

ajgriffin · 11-24-2008, 10:59 PM

Looking good Josh

11-12-2008, 10:06 PM	#351
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Finally my own build thread! Can't wait to see it with all the metal on it! __________________ The first '67 The current '67 '63 Biscayne

11-12-2008, 11:29 PM	#352
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Finally my own build thread! josh, this thing is so SICK. Makes mine look like a joke LOL. Where did you get those blue bushings that you used on your exhaust hangers? Also, do you know how those magnaflow mufflers sound? I like the fact that they are small. One more question, I noticed in one of your pics you have a metal plate on the cab mount rubber bushing on the forward drivers side. Are you leaving it there when you install the cab? I have taken two cabs off their frame and both had a shim on that cab mount.

11-20-2008, 04:47 PM	#354
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: Finally my own build thread! Can't wait to see this finished. __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

11-20-2008, 04:49 PM	#355
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: Finally my own build thread! another one to keep your eyes peeled on.. __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

11-22-2008, 11:13 PM	#356
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Finally my own build thread! Well i finally got enough time to get the truck outside and off the frame. It looks so different off the frame jig that i almost don't want to put it back on. I was able to snap a few pics of the frame with the motor and 1/2 of the exhaust installed before it got too dark to take some more pics. I was able to get most of the sheetmetal on tonight so tomorrow i will take some more pics of the truck with the bed on, 1 door and 1 fender. I almost forgot. The new rear end fits perfect with my wheels. I have around 3/4" per side of clearance which is exactly what i wanted. Anyways here is some pics Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

11-22-2008, 11:14 PM	#357
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Finally my own build thread! Tease! __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-22-2008, 11:18 PM	#358
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Finally my own build thread! Well i finally got enough time to get the truck outside and off the frame. It looks so different off the frame jig that i almost don't want to put it back on. I was able to snap a few pics of the frame with the motor and 1/2 of the exhaust installed before it got too dark to take some more pics. I was able to get most of the sheetmetal on tonight so tomorrow i will take some more pics of the truck with the bed on, 1 door and 1 fender. I almost forgot. The new rear end fits perfect with my wheels. I have around 3/4" per side of clearance which is exactly what i wanted. Anyways here is some pics Josh Attached Images __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

11-23-2008, 12:39 AM	#360
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: Finally my own build thread! Lookin good. __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

11-23-2008, 02:10 AM	#361
higgiec10 Registered User Join Date: Dec 2005 Location: baytown Posts: 243	Re: Finally my own build thread! all i can say is thats some nice goingto be a nice ride when done

11-23-2008, 12:46 PM	#362
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Finally my own build thread! Well i tried to get some decent pics of the truck with some sheetmetal but out of all the pics i only got 2 that came out. Since the sun is still rising it is reflecting off my truck. It look kind of angelic. So later today when the sun isn't as bright i will snap a few more. I can't wait to see it painted, wood in the bed and so on. Being patient sucks Josh Attached Images __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

11-23-2008, 01:23 PM	#363
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Re: Finally my own build thread! 2nd picture looks like a model. But everything in aspect ratio. haha

11-23-2008, 07:16 PM	#364
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Finally my own build thread! WOW isall i caan say, nice job and well done!!! __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

11-23-2008, 11:24 PM	#365
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Finally my own build thread! Well i was had a few minutes and snapped a few more pics. I know they are almost the same pics as i already posted but i just love the how it is starting to look. I know i am Josh Attached Images __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

11-23-2008, 11:27 PM	#366
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Finally my own build thread! Last 2 pics. One of the pics is just showing the front bed mount i made. Josh ps. Just for everyones knowledge. If you get a pre 69 rear end the max recommended wheel backspacing is 4.5" on a 10" wide wheel. It won't fit on a 70 and up rear end. I learned that out the hard way. It leaves you just under 3/4" per side of clearance which should be plenty. Just sharing that info Attached Images __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold Last edited by abadsvt; 11-23-2008 at 11:31 PM. Reason: Added the post script

11-23-2008, 11:38 PM	#367
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Finally my own build thread! Looks badass! What are you doing with the bedfloor? __________________ The first '67 The current '67 '63 Biscayne



Register or Log In To remove these advertisements.

11-24-2008, 12:35 AM	#369
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Finally my own build thread! Man I wish I had your skills. Looking good!!! What's the best place to get Foose wheels and how much?

11-24-2008, 03:30 PM	#371
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Finally my own build thread! Well i couldn't resist, i grabbed some nitrogen and aired up my truck to about ride height. It looks sick! I had to take some pics. Josh Attached Images __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

11-24-2008, 04:09 PM	#372
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Finally my own build thread! looking good bro! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

11-24-2008, 04:12 PM	#373
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Finally my own build thread! Oh, I so hate you !!! JK I love it __________________ Just not low enough... ----------------------------- Sinister Killer

11-24-2008, 05:22 PM	#374
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Finally my own build thread! I think you need a little more sidewall....just my opinion though!

11-24-2008, 10:59 PM	#375
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: Finally my own build thread! Looking good Josh __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

Register or Log In To remove these advertisements.