![]() |
|
![]() |
#1 |
Registered User
Join Date: Jul 2013
Location: Nashville, TN
Posts: 216
|
Re: Disc Brake Upgrade Reference Thread
I assume the factory C10. I didn't change the ball joints or control arms at all. Just unbolted the factory stuff and bolted up the 99 Express stuff.
James
__________________
'64 C10 Build Officially LQ/NV3500 swapped and Bagged |
![]() |
![]() |
![]() |
#2 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Disc Brake Upgrade Reference Thread
I would suggest double checking the fit on the lower ball joint. I suppose it is possible that the Express van spindles use a different lower balljoint.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2013
Location: Nashville, TN
Posts: 216
|
Re: Disc Brake Upgrade Reference Thread
If I ever get some free time I will go back out there and check. Thanks for the assistance.
James
__________________
'64 C10 Build Officially LQ/NV3500 swapped and Bagged |
![]() |
![]() |
![]() |
#4 | ||
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Disc Brake Upgrade Reference Thread
Quote:
Quote:
We be nice to get a few pics of the parts installed...
__________________
Karl ![]() 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
||
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2012
Location: Newnan Ga
Posts: 88
|
Re: Disc Brake Upgrade Reference Thread
Sorry for getting off track guys, but I am putting disc brakes on the rear of my 1985 Silverado and I have the Camaro calipers and the Impala rotors. My question is how do I hook up the E-Brakes? I have the Camaro brake cables, but they are the same lengths. Can someone help me with the hookup?
Thanks. |
![]() |
![]() |
![]() |
#6 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Disc Brake Upgrade Reference Thread
So I assume that your '85 has a longer e-brake cable on the right side?
I do not have an answer for you since I am not familar with your year of truck. The '63-'72's have a different e-brake cable arrangement You might get a better response if you have this post moved to either the Camaro caliper bracket for sale thread, the suspension section or the '73-'87 section of the forum.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2012
Location: Newnan Ga
Posts: 88
|
Re: Disc Brake Upgrade Reference Thread
Thanks, I will go over to the Camaro caliper bracket for sale thread, the suspension section or the '73-'87 section of the forum.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jul 2013
Location: Nashville, TN
Posts: 216
|
Re: Disc Brake Upgrade Reference Thread
Silly question, but what is everyone doing for their brake lines? I am going to be making my own to replace all the old rusty lines, but I wanted to know if you guys did anything special, or if it is just a pretty straight-forward brake line fabrication?
James
__________________
'64 C10 Build Officially LQ/NV3500 swapped and Bagged |
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Oct 2013
Location: Elkton
Posts: 693
|
Re: Disc Brake Upgrade Reference Thread
So could the ball joint hole in the c10 lca be enlarged to work?Would be a lot easyier than finding a c20 lca
|
![]() |
![]() |
![]() |
#10 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Disc Brake Upgrade Reference Thread
I am assuming you are thinking about the 6 lug disc conversion using the '88-'98 LD 2500 parts? If so, are you aware of the possible camber issues talked about above?
To answer your question. Most anything can be done if you want to spend the money to make it happed. I don't know if there is enough meat on the C10 LCA to be able to be machined out to accept the '88-'98 lower ball joint. If this is the route you want to go, I would consider having a ring machined and welded in as ChiefRocka did for his '62 Suburban before he changed direction. Here is a link: http://www.67-72chevytrucks.com/vboa...=533641&page=6
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 07-26-2014 at 12:47 AM. Reason: Added link |
![]() |
![]() |
![]() |
#11 |
Registered User
![]() Join Date: Oct 2013
Location: Elkton
Posts: 693
|
Re: Disc Brake Upgrade Reference Thread
Thanks captain fab i think i will stick to the 73-87 spindle rotors and calipers since no one has posted back about how and if they addressed the caster and camber issues .Thanks for the info!
|
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: Dec 2011
Location: Donaldsonville, La.
Posts: 1,024
|
Re: Disc Brake Upgrade Reference Thread
Quote:
|
|
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: Aug 2010
Location: HSV, AL
Posts: 282
|
Turning Radius too short with 80s cross member swap?
65 Burb, PO did a cross-member swap from 1980-something truck.
Seems to hit the stops too soon, have to make 4-5 point turns getting in tight spots... Is this a known issue with this swap or do I look for something else that may not be quite right? Also has 2" dropped spindles (believe they are McGaughys) and 2" drop springs on the front. Rear has 3" drop springs. It's a bit too low in the front relative to the rear. Thx, Roy
__________________
1965 Suburban Waiting on Time and Money Last edited by RoyL; 08-30-2014 at 10:54 PM. |
![]() |
![]() |
![]() |
#14 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Disc Brake Upgrade Reference Thread
Does it turn farther to the left than the right? If so a front end alignment should take care of that. How sharp/tight of a turn are you making that takes 4 or 5 points to make?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Sep 2009
Location: California Delta
Posts: 2,163
|
Re: Disc Brake Upgrade Reference Thread
I've noticed that some brands of drop spindles will increase your turning radius. I had a problem on a 93 C1500 that I had several years ago. It had a terrible turning radius compounded by it being an xcab. One of the spindles had a problem and the company wouldn't back up their product so I bought BellTech spindles because they do. When I installed them my turning radius was way better.
__________________
Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil. |
![]() |
![]() |
![]() |
#16 |
Senior Member
![]() Join Date: Aug 2010
Location: HSV, AL
Posts: 282
|
Re: Disc Brake Upgrade Reference Thread
well, now that you mention it, it does turns further right than left. I looked and found the left side hits the stop the right side does not. It's had an alignment since I bought it. The only issue they mentioned was the front was too low to align it right, so I dropped the back 3" then took it back... Sounds like a return trip to see if they can straighten it out and/or tell me why they couldn't fix it the 1st time...
__________________
1965 Suburban Waiting on Time and Money |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jul 2013
Location: Nashville, TN
Posts: 216
|
Re: Disc Brake Upgrade Reference Thread
From what I can gather, it will have too much positive camber, i.e top of tire leaning out from the fender.
James
__________________
'64 C10 Build Officially LQ/NV3500 swapped and Bagged |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Dec 2011
Location: Donaldsonville, La.
Posts: 1,024
|
Re: Disc Brake Upgrade Reference Thread
I've got a whole 90's model truck and would really like to keep the six lugs. I'll start looking at what it might take to do it on my 65. Thanks
|
![]() |
![]() |
![]() |
#19 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Disc Brake Upgrade Reference Thread
I haven't had time to check into this any further, but going by what some of the others that have done this, either the top ball joint will have to move inward, or the lower outward. The lower could move outward easily by modifying a '73-'87 lower control arm as ChiefRocka did. I had originally planned on modifying a '73-'87 LAC to accept the larger balljoint anyway.
Here's the page of ChiefRocks's build thread that shows the LCA mod to accept the '88-'98 ball joint. http://www.67-72chevytrucks.com/vboa...=533641&page=6 A while back I sent a PM to one of the originators of this conversion, but he did not remember having any alignment issues and had long since sold the truck.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 09-02-2014 at 02:57 AM. Reason: Added link |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Sep 2008
Location: Oxford, MS
Posts: 7
|
Re: Disc Brake Upgrade Reference Thread
Where do I purchase the adapter sleeve to go from 69 to the 73-87....it was option #2 above
|
![]() |
![]() |
![]() |
#21 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Disc Brake Upgrade Reference Thread
The big vendors such as CPP, ECE and POL have them. But if you just change your entire steering linkage to the '73-'87 components, you don't need them. On a '67-'72 all that just bolts up.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Sep 2008
Location: Oxford, MS
Posts: 7
|
Re: Disc Brake Upgrade Reference Thread
? Everything I read says if I use later I will have to drill several new holes. guy somewhere on this board says 1 of 3 options. Use adapter or rethread later tie rod end or use all later and drill new holes. Of course I think when I gut on the later spindles I thought they were just 71 so I think I got 71 upper and lower ball joints...Turns out its a 79 and not 71 and the ball joints still fit. I did this several years ago so I will have to go back to autozone and see what year ball joint I got for sure....Thanks, Rick
|
![]() |
![]() |
![]() |
#23 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Disc Brake Upgrade Reference Thread
Most of the discussion in this thread is in regards to the '60-'66's, which do require 2 new holes for the '73-'87 idler arm. The '67-'72 trucks do not require those 2 new holes since the diler arm is the same as the '73-'87's. Which ever year your spindles are, if you use that year of steering linkage, you do not need those adapter sleeves. The '71-'72 spindles use a different ball joint than the '73-'87. I believe it is the uper?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#24 | |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,698
|
Re: Disc Brake Upgrade Reference Thread
Quote:
71-72 and 73-87 use the SAME lower balljoint. Upper balljoint and tie rods are different.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Feb 2014
Location: Nor Cali
Posts: 17
|
Re: Disc Brake Upgrade Reference Thread
Ok, question? I purchased a 78 rolling chassis, 12 bolt 3.42 with the 1 1/4 rotors. For a Crossmember swap onto my 60 for the disc brakes and power steering.The PO stated it was a hydraboost steering box. What's the difference? What size and or style brake booster master cylinder do I need. What power steering pump do I need? Or does it make a difference. I know they went to metric in 76 on the steering box hose fittings.... Oh and Captainfab I'll need one of each of you brackets for my 60 I know I'll have to mod my 60 frame for the box mount. Do I need to run hydroboost or does the steering box care?
Last edited by Thefullgonzo; 10-06-2014 at 07:14 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|