1972 Cheyenne Super Short Fleet Big Block build! - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

butternut1972 · 04-10-2011, 09:59 PM

Lookin good, nice parts collection you have there.

STOCKISH · 04-10-2011, 10:09 PM

Man, that sure is going to be an amazing truck! Great work so far buddy!

**SOON2BLAZE** · 04-10-2011, 10:26 PM

Hell ya! nothing like hunting down parts, good job.

Zoomin · 04-10-2011, 11:48 PM

Where did you get the radiator hoses?

Surprising that your NOS wipers were made in Mexico.

heeroyue2002 · 04-10-2011, 11:58 PM

you didnt strip all the back of the cab.

VA72C10 · 04-11-2011, 09:28 AM

Quote:

Originally Posted by butternut1972

Lookin good, nice parts collection you have there.

Quote:

Originally Posted by 1972SuperCheyenne

Man, that sure is going to be an amazing truck! Great work so far buddy!

Quote:

Originally Posted by SOON2BLAZE

Hell ya! nothing like hunting down parts, good job.

Thanks!

Quote:

Originally Posted by Zoomin

Where did you get the radiator hoses?

Surprising that your NOS wipers were made in Mexico.

Radiator hoses were off ebay...I'll look up the link later and post it.
Yeah, the wipers were also off ebay...didn't show the hecho en mexico sticker on them

But they are brand new wipers that look like my originals made by GM that I hadn't been able to find... probably really NNS (new newer stock) but still discontinued from what I've found.

Quote:

Originally Posted by heeroyue2002

you didnt strip all the back of the cab.

Oh wow, I didn't notice that

Just kidding. Working on that man....just got the bed off

Still have under the cab, the rest of the firewall, and parts of the interior to finish too...

VA72C10 · 04-13-2011, 10:04 PM

Got the NOS piece for over the tailgate handle

my4by2 · 04-13-2011, 10:06 PM

Nice score man! N.O.S. stuff is always nice to find!

VA72C10 · 04-13-2011, 10:06 PM

Been busy with local selling of parts and getting ready for carlisle...

....here are some pics of our family vehicle.

I like the stance with it loaded up

Looks kinda full, huh?

Not much air space

No room for me to move inside

Forgot to get pics of the tables, glass, fender, and grilles i had on the roof rack

VA72C10 · 04-13-2011, 10:07 PM

Oh...the picture with the rear hatch open was AFTER the show...shows how little I sold as it was still PACKED

**superflysteiny** · 04-13-2011, 10:10 PM

That sucks
Posted via Mobile Device

VA72C10 · 04-13-2011, 10:13 PM

Quote:

Originally Posted by my4by2

Nice score man! N.O.S. stuff is always nice to find!

thanks, getting there...almost got all NOS stuff for the outside.

Might be a BIG change of direction on this project soon (people who know me and my builds will NOT be surprised

)

I'm still going to build the truck and it will be a SWB BB Super.....but might not be this truck. Looking at a truck in NC that is a TRUE SWB BB Super with even more options than this truck had. Also has the correct 402/400 with it. So I am leaning towards selling this frame/cab and purchasing the other truck.

I'm going to get the rust repaired in the cab and freshen up the frame a little and see if I can sell it for what I have in it....then pick up the other SWB super....

I just feel to do this build right...with all the nice and NOS stuff I have and to get top dollar I should get a TRUE SWB BB Super with number's matching block, frame & cab....

Opinions?

heeroyue2002 · 04-13-2011, 10:40 PM

thats how you load a van up! i use my astro for scrap collecting as well so ive had it squatting like heck.

Zoomin · 04-13-2011, 11:25 PM

Quote:

Originally Posted by VA72C10

thanks, getting there...almost got all NOS stuff for the outside.

Might be a BIG change of direction on this project soon (people who know me and my builds will NOT be surprised

)

I'm still going to build the truck and it will be a SWB BB Super.....but might not be this truck. Looking at a truck in NC that is a TRUE SWB BB Super with even more options than this truck had. Also has the correct 402/400 with it. So I am leaning towards selling this frame/cab and purchasing the other truck.

I'm going to get the rust repaired in the cab and freshen up the frame a little and see if I can sell it for what I have in it....then pick up the other SWB super....

I just feel to do this build right...with all the nice and NOS stuff I have and to get top dollar I should get a TRUE SWB BB Super with number's matching block, frame & cab....

Opinions?

IF (cost of new truck + body work to get to where you are now + shipping) < (extra you will get on sale + proceeds from sale of this truck - what you have in this truck)

do it

ELSE

forge ahead

END

VA72C10 · 04-14-2011, 12:20 AM

Quote:

Originally Posted by Zoomin

IF (cost of new truck + body work to get to where you are now + shipping) < (extra you will get on sale + proceeds from sale of this truck - what you have in this truck)

do it

ELSE

forge ahead

END

My thought is that there might be people who really want a TRUE original documented Swb bb truck and no matter how nice I make this swb bb...the original documentation will show it was a LWB. If I was building a driver or nice weekend cruiser I wouldn't care....but the amount of $$$ I have tied up in parts...this needs to be 100% right

The truck I'm looking at has OOODLES of documentation...I WILL spend more than I did on this truck in getting it, but as I said, the new truck comes with the correct 402/400 including everything for the engine (carb, intake, air cleaner, brackets, A/C, etc etc...

So I'm willing to pay more. In the end I feel it's a good investment if I want a chance at getting top $$$ for the truck.

And, someone will get a good deal on a nice SWB BB Super truck when I sell this one

Or...I can always part it for at least what I have in it

BB specific parts
402 engine (out of chevelle) rebuilt with mild cam
Posi rear (373)
Tilt
Cheyenne super stuff
Cab and rolling SWB frame on rally wheels with good title and 67K original miles disc front 5 lugs with power steering
I count at least 3000 in value there.

70LonghornCST · 04-14-2011, 12:59 AM

Quote:

Originally Posted by VA72C10

Got the NOS piece for over the tailgate handle

Ah...nothing like the feeling of opening that NOS part that arrives via the mail/UPS/FedEx. But then the elated feeling wanes and we need more...MORE...MORE!

Nice find, Jonathan.

**67cheby** · 04-14-2011, 10:04 AM

get the other truck if you are going for a BIG BUCK build !! my opinion

gcburdic · 04-14-2011, 10:07 AM

WHAT??!?!?! you are going to change directions after 15 pages of updates...I'm shocked

If you wanna complete original big block, big buck swb super build then go for the other one....you'll be selling to a limited market, but I know you know that already

no moa · 04-14-2011, 10:58 AM

wow, i'd do it.

BB72CHEVKT · 04-14-2011, 11:30 AM

I think it would be a smart move to get the real deal. I was suprised when this thread was started to see you use all these high dollar parts and it not be the real deal.

**lolife99** · 04-14-2011, 11:59 AM

Just my opinion,... but the real deal "high dollar" restoration will require the chassis to be nut and bolt correct.
All colors, and finishes.
I think it will be hard to make a profit.
(just my 2 cents)

VA72C10 · 04-14-2011, 12:13 PM

Quote:

Originally Posted by 70LonghornCST

Ah...nothing like the feeling of opening that NOS part that arrives via the mail/UPS/FedEx. But then the elated feeling wanes and we need more...MORE...MORE!

Nice find, Jonathan.

Thanks

Quote:

Originally Posted by 67cheby

get the other truck if you are going for a BIG BUCK build !! my opinion

That's the way I'm leaning

Quote:

Originally Posted by gcburdic

WHAT??!?!?! you are going to change directions after 15 pages of updates...I'm shocked

If you wanna complete original big block, big buck swb super build then go for the other one....you'll be selling to a limited market, but I know you know that already

Crazy for me to change my mind, huh?

Yep, I realize it's going to be a VERY limited market due to the price....therefore I want no reason for someone to question the legitimacy of the truck

Quote:

Originally Posted by no moa

wow, i'd do it.

thanks

Quote:

Originally Posted by BB72CHEVKT

I think it would be a smart move to get the real deal. I was suprised when this thread was started to see you use all these high dollar parts and it not be the real deal.

That's been my thought from the beginning too...I had some people tell me it might not matter...but that's a big chance to take

Quote:

Originally Posted by lolife99

Just my opinion,... but the real deal "high dollar" restoration will require the chassis to be nut and bolt correct.
All colors, and finishes.
I think it will be hard to make a profit.
(just my 2 cents)

I've run the numbers a few times now and I'll do okay even if it sells for less than I'm expecting. I have great hookups for body/paint/glass that really help me save. And I've done relatively well buying all this NOS stuff...

If I hadn't seen CSM and Jerry Brown's over restored trucks selling for 50-70K within the last 6 months I'd be concerned about making a profit too...but I'm going to build a truck modeled after theirs (and using many of the same parts for that matter (CSM parts who Jerry also uses)
So it really comes down to the quality of the body work and paint that would be the only difference (other than the marketing/reputation advantage that they have) And I'm confident in the guys doing the body work and paint!

**DANTIP** · 04-14-2011, 01:13 PM

Quote:

Originally Posted by VA72C10

Been busy with local selling of parts and getting ready for carlisle...

....here are some pics of our family vehicle.

I like the stance with it loaded up

Looks kinda full, huh?

Not much air space

No room for me to move inside

Forgot to get pics of the tables, glass, fender, and grilles i had on the roof rack

Now that's CUBE UTILIZATION at it's finest. I'd have trouble finding room for a cigarette-butt in there. Nice Work!!

sgaylord · 04-14-2011, 01:43 PM

Another awesome project I'm sure.... :-)

**FRENCHBLUE72** · 04-14-2011, 08:00 PM

Get the other truck it sounds like that would make you happy..

04-10-2011, 09:59 PM	#351
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: 1972 Cheyenne Super Short Fleet Big Block build! Lookin good, nice parts collection you have there. __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

04-10-2011, 10:09 PM	#352
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 1972 Cheyenne Super Short Fleet Big Block build! Man, that sure is going to be an amazing truck! Great work so far buddy! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

04-10-2011, 10:26 PM	#353
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: 1972 Cheyenne Super Short Fleet Big Block build! Hell ya! nothing like hunting down parts, good job.

04-10-2011, 11:48 PM	#354
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 1972 Cheyenne Super Short Fleet Big Block build! Where did you get the radiator hoses? Surprising that your NOS wipers were made in Mexico. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

04-10-2011, 11:58 PM	#355
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 1972 Cheyenne Super Short Fleet Big Block build! you didnt strip all the back of the cab. __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

04-13-2011, 10:04 PM	#357
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1972 Cheyenne Super Short Fleet Big Block build! Got the NOS piece for over the tailgate handle __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-13-2011, 10:06 PM	#358
my4by2 Registered User Join Date: Dec 2010 Location: Hot Springs, AR. Posts: 1,215	Re: 1972 Cheyenne Super Short Fleet Big Block build! Nice score man! N.O.S. stuff is always nice to find! __________________ 1977 Chevrolet K30 LWB Crew Cab 497HP Mast Motorsports 6.0L LY6 HO engine GM NV4500 5-speed, Centerforce clutch + NP205 D60 + 14-bolt FF w/ Eaton posi + disc brakes Skyjacker 2.5" full spring lift w/ Nitro shocks Custom paint + interior http://67-72chevytrucks.com/vboard/s...d.php?t=435722

04-13-2011, 10:06 PM	#359
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1972 Cheyenne Super Short Fleet Big Block build! Been busy with local selling of parts and getting ready for carlisle... ....here are some pics of our family vehicle. I like the stance with it loaded up Looks kinda full, huh? Not much air space No room for me to move inside Forgot to get pics of the tables, glass, fender, and grilles i had on the roof rack __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-13-2011, 10:07 PM	#360
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1972 Cheyenne Super Short Fleet Big Block build! Oh...the picture with the rear hatch open was AFTER the show...shows how little I sold as it was still PACKED __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-13-2011, 10:10 PM	#361
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 1972 Cheyenne Super Short Fleet Big Block build! That sucks Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

04-13-2011, 10:40 PM	#363
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 1972 Cheyenne Super Short Fleet Big Block build! thats how you load a van up! i use my astro for scrap collecting as well so ive had it squatting like heck. __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

04-14-2011, 10:04 AM	#367
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1972 Cheyenne Super Short Fleet Big Block build! get the other truck if you are going for a BIG BUCK build !! my opinion __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-14-2011, 10:07 AM	#368
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 1972 Cheyenne Super Short Fleet Big Block build! WHAT??!?!?! you are going to change directions after 15 pages of updates...I'm shocked If you wanna complete original big block, big buck swb super build then go for the other one....you'll be selling to a limited market, but I know you know that already __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

04-14-2011, 10:58 AM	#369
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: 1972 Cheyenne Super Short Fleet Big Block build! wow, i'd do it. __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

04-14-2011, 11:30 AM	#370
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: 1972 Cheyenne Super Short Fleet Big Block build! I think it would be a smart move to get the real deal. I was suprised when this thread was started to see you use all these high dollar parts and it not be the real deal. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400



Register or Log In To remove these advertisements.

04-14-2011, 11:59 AM	#371
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,699	Re: 1972 Cheyenne Super Short Fleet Big Block build! Just my opinion,... but the real deal "high dollar" restoration will require the chassis to be nut and bolt correct. All colors, and finishes. I think it will be hard to make a profit. (just my 2 cents) __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-14-2011, 01:43 PM	#374
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: 1972 Cheyenne Super Short Fleet Big Block build! Another awesome project I'm sure.... :-) __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

04-14-2011, 08:00 PM	#375
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: 1972 Cheyenne Super Short Fleet Big Block build! Get the other truck it sounds like that would make you happy.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.