finally come

[pimpston65]

Originally Posted by aerotruk63

If it's a 5 lug 15" it will have a Dodge bolt pattern. You'll need a couple of steelies that the hubcap will snap onto. Would look great behind the Burb.

A hundred feet of black PVC pipe on the roof when parked will give you a lot of hot water at the end of the day for an outdoor shower for two,.... nudge nudge, know what I mean? lol

i sure do, wink wink!!!

[lower50's]

Cool trailer one like that is on my list to rebuild. Also air ride so it sits on the ground with my truck.

[pimpston65]

its kinda bounces a bit, not bad thou. its home and stayed attached. now the resto starts!!!

[aerotruk63]

Safety Chains go over the receiver in front of the hitch then hook onto the eyelets. This way if the hitch comes undone it doesn't dive into the ground.
You'll have to paint the same colors as the Burb. Your not looking for hard to find NOS pieces for the trailer are you?

[pimpston65]

Originally Posted by aerotruk63

Safety Chains go over the receiver in front of the hitch then hook onto the eyelets. This way if the hitch comes undone it doesn't dive into the ground.
You'll have to paint the same colors as the Burb. Your not looking for hard to find NOS pieces for the trailer are you?

well its lisa's project, with me being silent(yeah right) ima just restore/repair items to working condition, the interior will get a full redo. its gonna be same color as the burb, but shiny aluminimum on top and same body color stripe as the burb with white on the bottom. thanks on the chain location i wasnt sure which was best, glad it didnt come apart. any other tips we should know, or better yet come by and walk us through. we'll cook!!!

[65chevysub]

Originally Posted by pimpston65

painted the arm rest the closest to fawn i could find

Pimpston
How is your armrest holding up after painting it? My paint is all cracking on mine, so now I have to figure out how to either re-do it, or strip it.
I cleaned it real good, and prepped it, but it didn't hold. Hope you had better luck.

[pimpston65]

Originally Posted by 65chevysub

Pimpston
How is your armrest holding up after painting it? My paint is all cracking on mine, so now I have to figure out how to either re-do it, or strip it.
I cleaned it real good, and prepped it, but it didn't hold. Hope you had better luck.

mine is in perfect condition!!! but its in a box uninstalled. that sucks for both of us!!!

[jonzcustomshop]

here is a cool build thread that a friend of mine posted on one of those campers:
http://www.jalopyjournal.com/forum/t...am-yum.825609/

here is a link to the finished camper:
http://www.jalopyjournal.com/forum/t...ed-ham.936179/

[65chevysub]

Originally Posted by 65chevysub

Pimpston
How is your armrest holding up after painting it? My paint is all cracking on mine, so now I have to figure out how to either re-do it, or strip it.
I cleaned it real good, and prepped it, but it didn't hold. Hope you had better luck.

Here is my armrest now, and the paint I used on it.

[pimpston65]

Originally Posted by 65chevysub

Here is my armrest now, and the paint I used on it.

i used the same paint, im gonna look for a better paint!!!

[LT1 Burb]

They make a product that it is a plastic adhesive helper. I used it for painting all the hard plastic parts in my cab and it helps the paint to bond to the material better.

[65chevysub]

I will look into that. I'm thinking the flex from resting my arm on it, and pulling on it had something to do with it as well.

[pimpston65]

just mess'n around. it "kinda" fits ima need to do some mods to make it NOT come off on the road!!!

[aerotruk63]

I like it! Gonna look good together.
Now to incorporate Suburban tail lights on the trailer!

[pimpston65]

your so smart, i would have never thought of that. good thing i didn't buy those nos round ones!!! of course i have 2 sets so I'm good. or i could pickup an nos pair???

[aerotruk63]

Somewhere in my stuff I have lenses and bezels but not the sockets. Their yours if I come across them.

[pimpston65]

Originally Posted by aerotruk63

Somewhere in my stuff I have lenses and bezels but not the sockets. Their yours if I come across them.

no worries i have one nos complete set and i have a set i got from a forum and come to think of it i have the set that came on it. so i have 3 sets.

[aerotruk63]

Ok now your just showing off! LMAO

[pimpston65]

Originally Posted by aerotruk63

Ok now your just showing off! LMAO

who me? never, wink wink..

[TJ's Chevy]

Hub caps look cool on there! Might make some people scratch their heads. haha!

[65chevysub]

Hey Pimpston. The site is saying you have exceeded your quota for private messages, Can you verify, and send me a PM with your address for the part?
Thanks

[pimpston65]

Originally Posted by 65chevysub

Hey Pimpston. The site is saying you have exceeded your quota for private messages, Can you verify, and send me a PM with your address for the part?
Thanks

pm sent.

[61K10]

Mr P--what have you been doing on your builds?

[pimpston65]

Originally Posted by 61K10

Mr P--what have you been doing on your builds?

i havent been in the garage for awhile, my new project is my 1920 home. lots of millwork, so im gaining woodworking skills... maybe i produce wooden beds outta white oak or SYP...

[61K10]

Yes the house should be the first inline. Fun new skills. Nothing like learning something new, and doing it correctly. Enjoy--------------