Lime Wife's 67

[Hubscrub]

Originally Posted by oldblue1968chevy

We going to see it @ the next manchester get together

don't know, i'm planning now to rebuild the front end too.

[Hubscrub]

Also i ordered the 4in drop springs and the super trac bar to get the rearend took care of.

[oldblue1968chevy]

Let me know how you like the drop springs. And what brand of springs did you go with? I still want the hauling abilites of stock HD springs, I thought ECE made 4" burb/Hd coils but i looked and didnt find them?..

[oldblue1968chevy]

Mrs hubscrub will be nice and safe at least

good moog and put her a swaybar on it too

[Hubscrub]

Originally Posted by oldblue1968chevy

Mrs hubscrub will be nice and safe at least

good moog and put her a swaybar on it too

yea i hope so, i need to find another sway bar to, i want to redo the front because i don't trust the work of the people before me from all the stuff i've fixed on this thing.

[oldblue1968chevy]

Do you want the rivited frame brackets?

I'll keep an eye out in my junkyard runs let me know if you find one and i'll stop looking

I assume youd 'rather' have the large diameter?

[heeroyue2002]

Originally Posted by oldblue1968chevy

Do you want the rivited frame brackets?

I'll keep an eye out in my junkyard runs let me know if you find one and i'll stop looking

I assume youd 'rather' have the large diameter?

do u mean the 3//4 ton sway?

[oldblue1968chevy]

yeah 3/4 or 1 ton

[Hubscrub]

Originally Posted by oldblue1968chevy

Do you want the rivited frame brackets?

I'll keep an eye out in my junkyard runs let me know if you find one and i'll stop looking

I assume youd 'rather' have the large diameter?

Don't worry about the riveted on brackets if ya find one i'm thinking of going to the pull a part some time maybe.

[67chevy1series]

inner fender looks good nate need to see it in paint before i can really judge it. the primer looks goo though, hehe

[Hubscrub]

i did some wire clean up over the weekend, also started on the front end after work today. Gonna go tomm. afternoon to my good local parts store and match up the ball joints i think it's 73-87 parts.

[oldblue1968chevy]

good time to cut a coil if your gonna

you just doin bj's and the brakes outer tie rod ends

i'll try to swing by junkyard tom. i go rite by it to get leafblower in the AM for your swaybar

[Hubscrub]

Originally Posted by oldblue1968chevy

good time to cut a coil if your gonna

you just doin bj's and the brakes outer tie rod ends

i'll try to swing by junkyard tom. i go rite by it to get leafblower in the AM for your swaybar

to my knowledge a coil cut has been done, yea ball joints, tie rods, brakes. If i don't find anything else these might have not been to old i don't know i will spend the $$$ for the peace of mind.

[oldblue1968chevy]

whatta bout the steering and control arm shafts (I didnt replace mine either..)

[67chevy1series]

its good to replace them if your restoring or rebuilding the truck

[Hubscrub]

got the driver side cleaned and painted, and ball joints installed. passenger side i'm working on cleaning but do have the lower joint installed (cleaned that area so i could get the ball joint in while i had the installer rented). It's storming out right now so no worky

[oldblue1968chevy]

Im worky in the stormy out from under the garage porch too

Keep at ityou'll have her truck soon real soon

[Hubscrub]

i'll be glad, after this is done got to turn around and fix the rear end stuff

[Hubscrub]

did alittle after work and mowin the yard today. got the spindle back mounted also pulled the shock to paint it.

[oldblue1968chevy]

No new shocks?

Does manchester have a cruise in in August?

There is a little (i mean small) parade group of cars here in viola on the 3th of august

'viola vally homecomming'
august 12 tractor pull that eve (if you are big on those, im not)
the next AM there is a little parade (gonna try to get the ol car in there) and some other activities its all free except the tractor pull im inviting you id give ya a flier but i dunno if i will see mr mrs hubscrub lol

I AM going to try to check the whiskey runners thing out in october @ lynchburg this year I think it'd be a neat show on theyre square

[oldblue1968chevy]

Got any extra HEI's you'd wanna part with nate? im having electrical problems (hammer wont fix)

[oldblue1968chevy]

And are you putting new calipers on as well as brakes (just curious)

[Hubscrub]

Originally Posted by oldblue1968chevy

No new shocks?

Does manchester have a cruise in in August?

There is a little (i mean small) parade group of cars here in viola on the 3th of august

'viola vally homecomming'
august 12 tractor pull that eve (if you are big on those, im not)
the next AM there is a little parade (gonna try to get the ol car in there) and some other activities its all free except the tractor pull im inviting you id give ya a flier but i dunno if i will see mr mrs hubscrub lol

I AM going to try to check the whiskey runners thing out in october @ lynchburg this year I think it'd be a neat show on theyre square

i'm assuming they do, should be on the 13th. Whiskey runners is pretty cool it's in the park right down from the square last year i left early to ride up manchester.

Originally Posted by oldblue1968chevy

Got any extra HEI's you'd wanna part with nate? im having electrical problems (hammer wont fix)

Nope, sorry

Originally Posted by oldblue1968chevy

And are you putting new calipers on as well as brakes (just curious)

for sure new rubber lines, caliper not sure yet gonna go with these right now

[oldblue1968chevy]

Those rubber brake hoses ive heard shrink internally

Better do it all now while its apart etc it'll be easier.

So your going with supertrac bar? Have the springs came in yet?

[Wbrown]

Not trying to cloud up you page, thought lime wifes 67 would like to check out my seats I got covered.