68' Chevy c10 - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longbed67 · 09-12-2012, 08:29 PM

Nice Work! Keep It up!

jlsanborn · 09-12-2012, 11:33 PM

More stellar work! I just happen to have a few flavors of JB Weld laying around and that makes sense. Thanks for the advice, you make it look easy. That's a bitc*in first car man! What an ideal resto. My build is just starting to roll again and I'm hoping to have a busy (and expensive!) winter. I'll be calling on you and a couple others around here for more tips!

TEN CHEVYS TO YA!

XxCHEVYMANxX · 09-13-2012, 06:42 AM

Quote:

Originally Posted by chapster

Nice job on the steering wheel and small detailed parts. It makes all the difference at final assembly....

Posted via Mobile Device

Thanks chapster ! Just ready to be done with the small details.

Quote:

Originally Posted by 68 Four on the Floor

Steering wheel looks daaamn good. you should consider refurbing them for resale.

Thanks man! that might be something to think about. repops are @ $300. and most people would rather have original. I have another one thats in worse shape, going to scale it down to 15" diameter this winter.

Quote:

Originally Posted by longbed67

Nice Work! Keep It up!

Thanks Adam ! Trying to get something done everyday, anything.

Quote:

Originally Posted by jlsanborn

More stellar work! I just happen to have a few flavors of JB Weld laying around and that makes sense. Thanks for the advice, you make it look easy. That's a bitc*in first car man! What an ideal resto. My build is just starting to roll again and I'm hoping to have a busy (and expensive!) winter. I'll be calling on you and a couple others around here for more tips!

TEN CHEVYS TO YA!

Right on ! Thanks jl ! happy to help out whenever I can, I'm good for some low tech or on the cheap fixes.

yea I cant wait to get my 65' on the road again, but I have to get the parts runner on the road first !

XxCHEVYMANxX · 09-13-2012, 06:23 PM

got a few more parts in bc. looked like rain so I needed to get my truck back in(I need more room).
Name: 100_1420.jpg
Views: 758
Size: 35.1 KB

Name: 100_1421.jpg
Views: 757
Size: 44.9 KB

Name: 100_1422.jpg
Views: 765
Size: 60.0 KB

Name: 100_1424.jpg
Views: 765
Size: 34.7 KB

Name: 100_1426.jpg
Views: 758
Size: 34.1 KB

I will get 'em in clear in the morning.

litew8 · 09-13-2012, 07:46 PM

FrankieD · 09-13-2012, 08:01 PM

Looks good what kind of gun do you have?

jlsanborn · 09-13-2012, 08:29 PM

Quote:

Originally Posted by FrankieD

Looks good what kind of gun do you have?

Same question! I've got a HVLP gravity feed set that I bought from "The Captain" if you know what I mean. It came with a little dude and a standard size fella with two tips. One is 0.4mm I think, for primer??? On the power side I've got two of them stand-ups on wheels that say "5hp", even tho they're 15A single phase, so more like 3/4hp each. With the two tied together tho, I get a pretty good huff. I'm a bit worried about water too. I have a good quality filter/regulator with a sediment bowl, but I've seen some little water traps that dudes hang right on the end of their guns??? By the time I get to painting it'll be pretty cold around here. I'll have to stoke the fire for a few hours at least to get it to temp. That temp will hold for several hours (if I close up and walk away), but then back to chilly! Bad deal you suppose?

Your moving steady dude and all them bits look real nice. Did you do anything different for the plastic defrost vents? What's next on the list?

Couple more Chevys for ya!

Johnny!

XxCHEVYMANxX · 09-14-2012, 11:09 AM

Quote:

Originally Posted by litew8

Thanks man ! thats how I've been feelin !

Quote:

Originally Posted by FrankieD

Looks good what kind of gun do you have?

Thanks FrankieD ! I'm still using an old Devillbis finish line siphon feed, and a pasche vl dual action airbrush. wish I had a Sata and a Iwata.

Quote:

Originally Posted by jlsanborn

Same question! I've got a HVLP gravity feed set that I bought from "The Captain" if you know what I mean. It came with a little dude and a standard size fella with two tips. One is 0.4mm I think, for primer??? On the power side I've got two of them stand-ups on wheels that say "5hp", even tho they're 15A single phase, so more like 3/4hp each. With the two tied together tho, I get a pretty good huff. I'm a bit worried about water too. I have a good quality filter/regulator with a sediment bowl, but I've seen some little water traps that dudes hang right on the end of their guns??? By the time I get to painting it'll be pretty cold around here. I'll have to stoke the fire for a few hours at least to get it to temp. That temp will hold for several hours (if I close up and walk away), but then back to chilly! Bad deal you suppose?

Your moving steady dude and all them bits look real nice. Did you do anything different for the plastic defrost vents? What's next on the list?

Couple more Chevys for ya!

Johnny!

Thanks Dude ! yep your 4mm is for primer or high solid paint, I also use it for big bass boat metal flake.your big enemy will be water, and the more your compressor has to run... the more water you will have. The gun I use is HVLP as well, and I like to keep the pressure set high at the compressor and use a regulator at the gun with a moisture trap too. Be EXTRA careful painting in a small closed space with a fire going. I've heard cases where just a pilot light ignited the fumes. when I have to paint and need heat I use a salamander heater so I can shut it down when I get to the temp I need. heres a couple pics for ya.
Name: 100_1427.jpg
Views: 726
Size: 31.6 KB

Name: 100_1427.jpg
Views: 726
Size: 31.6 KB

Name: 100_1428.jpg
Views: 692
Size: 29.1 KB

Zoomin · 09-14-2012, 12:29 PM

How did the parts turn out with the clear?

XxCHEVYMANxX · 09-14-2012, 12:55 PM

Just finished clear coating, I had to wait for it to warm up a little. 48 deg. this morning. they turned out nice. as soon as I can open up the shop to let the fog out I'll post some pics.

FrankieD · 09-14-2012, 03:24 PM

Quote:

Originally Posted by XxCHEVYMANxX

Just finished clear coating, I had to wait for it to warm up a little. 48 deg. this morning. they turned out nice. as soon as I can open up the shop to let the fog out I'll post some pics.

Signs of things to come, should be a nice weekend for painting you know how things can go to crap by October. I have a couple of HF guns but I am only doing touch up so no big deal

XxCHEVYMANxX · 09-14-2012, 04:07 PM

Quote:

Originally Posted by FrankieD

Signs of things to come, should be a nice weekend for painting you know how things can go to crap by October. I have a couple of HF guns but I am only doing touch up so no big deal

Yep, I dont want to think about it. seems like winter was just here. Hoping to get the inside of the doors, and fenders jammed this weekend so I'm looking forward to good weather. You should do alright with HF guns for touch up.

heres some pics !
Name: 100_1440.jpg
Views: 728
Size: 62.9 KB

Name: 100_1440.jpg
Views: 728
Size: 62.9 KB

Name: 100_1441.jpg
Views: 720
Size: 62.7 KB

Name: 100_1442.jpg
Views: 724
Size: 39.2 KB

Name: 100_1448.jpg
Views: 726
Size: 23.8 KB

Name: 100_1450.jpg
Views: 731
Size: 101.2 KB

**67cheby** · 09-14-2012, 04:09 PM

looking great !

XxCHEVYMANxX · 09-14-2012, 04:10 PM

and some more !! clear laid down smooth so it should be an easy cut and buff.
Name: 100_1444.jpg
Views: 729
Size: 34.1 KB

Name: 100_1451.jpg
Views: 718
Size: 35.2 KB

Name: 100_1454.jpg
Views: 724
Size: 44.3 KB

Name: 100_1455.jpg
Views: 726
Size: 41.6 KB

**67cheby** · 09-14-2012, 04:14 PM

man that looks slick and it is a beautiful color !

jlsanborn · 09-14-2012, 06:26 PM

You're haulin a$$!

Zoomin · 09-14-2012, 09:11 PM

Quote:

Originally Posted by 67cheby

man that looks slick and it is a beautiful color !

Took the words right out of my mouth.
Posted via Mobile Device

mightymouse · 09-14-2012, 09:25 PM

Quote:

Originally Posted by Zoomin

Took the words right out of my mouth.
Posted via Mobile Device

x3 looking good

68GMCCustom · 09-14-2012, 09:38 PM

I love that color. Almost a match for a '78 Camaro Type LT I had...but richer.

mcbassin · 09-14-2012, 10:14 PM

Wow that paint is popping! I love the color. Dig the dart board too

Posted via Mobile Device

XxCHEVYMANxX · 09-14-2012, 11:12 PM

Quote:

Originally Posted by 67cheby

man that looks slick and it is a beautiful color !

Thanks Mike ! yeah I'm happy I went with this color.

Quote:

Originally Posted by jlsanborn

You're haulin a$$!

Thanks jl ! I wanna get her on the road !

Quote:

Originally Posted by Zoomin

Took the words right out of my mouth.
Posted via Mobile Device

Thank Steve ! I appreciate that.

Quote:

Originally Posted by mightymouse

x3 looking good

Thank you Johnny ! when are you going to post some progress of that Bad A$$ truck of yours ? been waiting patiently for an update.

Quote:

Originally Posted by 68GMCCustom

I love that color. Almost a match for a '78 Camaro Type LT I had...but richer.

Thank you much 68GMCCustom ! I need to check out what your building.

Quote:

Originally Posted by mcbassin

Wow that paint is popping! I love the color. Dig the dart board too

Posted via Mobile Device

Thanks Mike ! yeah, thats why I took that pic. I liked that reflection.

Houch · 09-16-2012, 12:43 PM

Looking good John. You get anymore sprayed?
Posted via Mobile Device

XxCHEVYMANxX · 09-16-2012, 02:03 PM

Quote:

Originally Posted by Houch

Looking good John. You get anymore sprayed?
Posted via Mobile Device

Thanks greg ! I'll be doing the interior side of the doors and the grill in about an hour. Planned on shooting this morning, but the doors needed a little more attention. will post some pics this afternoon !

XxCHEVYMANxX · 09-16-2012, 06:38 PM

More paint work !
Name: 100_1468.jpg
Views: 658
Size: 49.3 KB

Name: 100_1476.jpg
Views: 657
Size: 34.9 KB

Name: 100_1469.jpg
Views: 652
Size: 43.5 KB

Name: 100_1475.jpg
Views: 660
Size: 42.7 KB

XxCHEVYMANxX · 09-16-2012, 06:40 PM

A couple more....
Name: 100_1471.jpg
Views: 656
Size: 58.6 KB

Name: 100_1474.jpg
Views: 658
Size: 64.5 KB

Gotta go clean my gun.

09-12-2012, 08:29 PM	#351
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: 68' Chevy c10 Nice Work! Keep It up! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

09-12-2012, 11:33 PM	#352
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: 68' Chevy c10 More stellar work! I just happen to have a few flavors of JB Weld laying around and that makes sense. Thanks for the advice, you make it look easy. That's a bitc*in first car man! What an ideal resto. My build is just starting to roll again and I'm hoping to have a busy (and expensive!) winter. I'll be calling on you and a couple others around here for more tips! TEN CHEVYS TO YA! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

09-13-2012, 06:23 PM	#354
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 got a few more parts in bc. looked like rain so I needed to get my truck back in(I need more room). I will get 'em in clear in the morning. __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

09-13-2012, 07:46 PM	#355
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: 68' Chevy c10 __________________ project: "my happy mess"

09-13-2012, 08:01 PM	#356
FrankieD Registered User Join Date: Jan 2011 Location: Gilberts IL. Posts: 2,488	Re: 68' Chevy c10 Looks good what kind of gun do you have? __________________ 94 k2500 EXCab Long Bed 350ci New Toy 95 K2500 Suburban New PlowTruck 454ci Support our Troops @ http://anyairman.com http://www.woundedwarriorproject.org/

09-14-2012, 12:29 PM	#359
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 68' Chevy c10 How did the parts turn out with the clear? __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

09-14-2012, 12:55 PM	#360
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 Just finished clear coating, I had to wait for it to warm up a little. 48 deg. this morning. they turned out nice. as soon as I can open up the shop to let the fog out I'll post some pics. __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

09-14-2012, 04:09 PM	#363
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 68' Chevy c10 looking great ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-14-2012, 04:10 PM	#364
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 and some more !! clear laid down smooth so it should be an easy cut and buff. __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

09-14-2012, 04:14 PM	#365
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 68' Chevy c10 man that looks slick and it is a beautiful color ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-14-2012, 06:26 PM	#366
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: 68' Chevy c10 You're haulin a$$! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

09-14-2012, 09:38 PM	#369
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 68' Chevy c10 I love that color. Almost a match for a '78 Camaro Type LT I had...but richer. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

09-14-2012, 10:14 PM	#370
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 68' Chevy c10 Wow that paint is popping! I love the color. Dig the dart board too Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

09-16-2012, 12:43 PM	#372
Houch Time Machine Join Date: Oct 2009 Location: Sedgewickville Mo. Posts: 92	Re: 68' Chevy c10 Looking good John. You get anymore sprayed? Posted via Mobile Device __________________ Greg 1970 Chevy SWB http://67-72chevytrucks.com/vboard//...d.php?t=390588

09-16-2012, 06:38 PM	#374
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 More paint work ! __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)



Register or Log In To remove these advertisements.

09-16-2012, 06:40 PM	#375
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 A couple more.... Gotta go clean my gun. __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

Register or Log In To remove these advertisements.