What did you do to your truck today.The 3rd chapter

[3757chevy]

Originally Posted by novaX522

Got both sides assembled. Installed the new shocks and upper shocks supports. Got the steering linkage installed.
Getting close now.

You are replacing those brake hoses I hope.

[novaX522]

Originally Posted by 3757chevy

You are replacing those brake hoses I hope.

Yah, I have new hoses. Just waiting til I get the brakes on before I replace them. I got the driver side line to break free from brake hose. The passenger side would not break free. I had to cut the brake line, install a new fitting, and double flare the brake line.

[3757chevy]

Originally Posted by novaX522

Yah, I have new hoses. Just waiting til I get the brakes on before I replace them. I got the driver side line to break free from brake hose. The passenger side would not break free. I had to cut the brake line, install a new fitting, and double flare the brake line.

[cab4word67]

I've been installing my new Porter Built frontend, all or any of my old parts are available cheap. Just ask for a short list

[HO455]

Some flips for a neighbor. Looking very nice.

[ohboy321]

Today I removed my drivers side door and top hinge for rebuild. The door opens and closes just fine, but the door check doesn't work at all. I rebuilt the passenger side hinges in 2017 because you had to lift the door to close it.

On Edit: I want to note that I realized the top plate inside the pillar was floating around and I captured it with a bolt so it didn't drop to the bottom when I removed the factory hinge bolts. I read other posters having that happen and glad to notice it.

[Rust_never_sleeps]

I had not anticipated just how badly I su<k at fabrication, still working on the glovebox :eyeroll:

[Extended Power]

Almost done the exhaust...need another support hanger on each side.
But I couldn’t wait to hear it with the 4” side pipes.

https://youtu.be/vtFRFWl6ngs?si=RvuSBsvg6Q9I7DJR

I also installed the pressure sender for the new oil pressure gauge, as the stock one still reads about 40psi when the truck wasn’t running. Need to pull the cluster out, and work on that, but I gotta clean up the shop first...metal work is so messy.

[dmack91]

Trying to free up space in my shop so I can move the truck in. So I painted a set of ralleys and mounted some used TA radials to make it a roller. Then adapted a squarebody seat into it. Baby steps.

[TheRealJimmy]

installed a 1 1/2" shorter steering column and lowered the seat 2" with aftermarket brackets. Much more comfortable to me.

[novaX522]

Tonight I replaced the bearings and races. Got the bearings packed and the brake rotors installed. Installed the calipers and pads and new brake hoses.
I still need to bleed the brakes, grease ball joints and tie rods and install cotter pins. But I had to put the tires on and see if it sat different with new springs. I put 1” lower springs and removed a 1” spring spacer up front. There was 8” between tire and fender and now there is 6”, math never fails. Lol. I plan to replace the 27” tires with 31” tires, so that will get it down to a 4” gap.

[Extended Power]

Finished the exhaust on the truck.
I'm not a welder, but it shouldn't fall off anyways...

[raggedjim]

novax522, nice work, but your upper a-arms are on the wrong sides. It's a common mistake.

Good luck, Rg

[novaX522]

Originally Posted by raggedjim

novax522, nice work, but your upper a-arms are on the wrong sides. It's a common mistake.

Good luck, Rg

Wow, you are right! Glad you pointed that out before I tried to drive it. I’ll add that to the list of things to do. 2 steps forward and 1 step back. 😂

[raggedjim]

Originally Posted by novaX522

Wow, you are right! Glad you pointed that out before I tried to drive it. I’ll add that to the list of things to do. 2 steps forward and 1 step back. 😂

Been there and sometimes still do it! Good luck, Rg

[novaX522]

Originally Posted by raggedjim

novax522, nice work, but your upper a-arms are on the wrong sides. It's a common mistake.

Good luck, Rg

I got the upper A arms on the correct sides tonight. Thanks again RG! Glad you caught that. I’m going to try to use this as a good excuse to buy another c10. That way if I have one tore apart, I can use the other one as a reference. Lol. Probably won’t work, but worth a try.

[raggedjim]

Great job, that looks much better. The alignment shop would have found it, but it would have cost you!

[LUCKTRUCK]

"what did you do?.... sadly, nothing on the trucks in quite some time. Maybe once all of this certainteed siding and Rockwool insulation is installed on the house, then it will be back to trucks.
How many do you spot?

[Chevys4life]

Originally Posted by LUCKTRUCK

"what did you do?.... sadly, nothing on the trucks in quite some time. Maybe once all of this certainteed siding and Rockwool insulation is installed on the house, then it will be back to trucks.
How many do you spot?

Possibly 3 maybe?

['68OrangeSunshine]

Originally Posted by LUCKTRUCK

"what did you do?.... sadly, nothing on the trucks in quite some time. Maybe once all of this certainteed siding and Rockwool insulation is installed on the house, then it will be back to trucks.
How many do you spot?

Is that a reddish Stepside buried forward of the 2-tone Orange/White cab on the left?

[novaX522]

Got all the tie rods, ball joints, idler, and pitman nuts snugged and cotter pins installed. Got everything greased. It doesn’t sound like a lot, but it took a while.

[Casper42]

finally found a great 1157 LED bulb that is bright, fits and performs...and reasonably inexpensive. Amazon has them in stock at their fulfillment centers so shipping is fast.

My comparison pic doesn't represent the performance perfectly, as photographing a bright light source is very challenging and it blows out the image.

Backstory: I didn't want to swap out the OE lens with one of those printed circuit board type lenses to get some brightness to the back. So over the past year, I have gone thru and tested numerous 1157 LEDs with little success. Many bulbs will not even mount in the socket as they bottom out before you can twist it to get it secured. Others were nearly hyperbright and had not brightness differentiation when you hit the brake pedal. The last ones I had, where the Sylvania 1157s that anyone can purcahse at any autopart store. These worked, but were dim in the standard "on" position, in fact dimmer than incandescent.

In short, if you want to be seen from behind when you hit that brake pedal, and still have better than OEM brightness when just cruising, these are the ones! We'll see how long they last!

[3757chevy]

Originally Posted by Casper42

finally found a great 1157 LED bulb that is bright, fits and performs...and reasonably inexpensive. Amazon has them in stock at their fulfillment centers so shipping is fast.

My comparison pic doesn't represent the performance perfectly, as photographing a bright light source is very challenging and it blows out the image.

Backstory: I didn't want to swap out the OE lens with one of those printed circuit board type lenses to get some brightness to the back. So over the past year, I have gone thru and tested numerous 1157 LEDs with little success. Many bulbs will not even mount in the socket as they bottom out before you can twist it to get it secured. Others were nearly hyperbright and had not brightness differentiation when you hit the brake pedal. The last ones I had, where the Sylvania 1157s that anyone can purcahse at any autopart store. These worked, but were dim in the standard "on" position, in fact dimmer than incandescent.

In short, if you want to be seen from behind when you hit that brake pedal, and still have better than OEM brightness when just cruising, these are the ones! We'll see how long they last!

Thanks for the info. I ordered in a set and got them for 10.99, I put them in my '68 Burb but have no pictures.

[Sicklajoie]

Took the Bomber for one last spin today before the snow hits and the salt gets laid down.
It's almost unheard of in Connecticut for it to be this late in the season with no snow yet, so luckily I was able to enjoy driving it for this long till spring.

[68bowtie]

Great looking pickup