New 64 Stepper Project - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 02-12-2021, 04:10 PM

Got the trans dust cover pan in today. There was an ear on the starter side that needed to be flattened down, not sure why it was there. One of the holes elongated when installing. Not a perfect piece but then again, there is nothing else out there for the 200-4R. Off to the powder coater it went with the PML Trans Pan. So the Oil Pan Dust Cover and Trans Pan will match.

**The Rocknrod** · 02-13-2021, 08:51 AM

Got the distributor ends of the plug wires terminated.

SCOTI · 02-13-2021, 03:26 PM

Quote:

Originally Posted by The Rocknrod

Got the distributor ends of the plug wires terminated.

What's the 411 on the Demon set-up? Are they square bore or spread? Any other specifics?

**The Rocknrod** · 02-13-2021, 05:31 PM

Quote:

Originally Posted by SCOTI

What's the 411 on the Demon set-up? Are they square bore or spread? Any other specifics?

Square bore, so the right intake pattern is used. - https://www.holley.com/products/fuel...eet/parts/1900

**The Rocknrod** · 02-14-2021, 04:18 PM

More work today, still working on the details but you get the idea.

**cwcarpenter98** · 02-14-2021, 05:05 PM

Dadgum, that's shiny

**pdxhall** · 02-16-2021, 02:04 PM

NICE. It's looking real good.

**The Rocknrod** · 02-19-2021, 04:18 PM

We were without internet in my area for a few days, but I worked some on it.

**The Rocknrod** · 02-22-2021, 10:17 AM

Got my tans pan and TC cover back from the powder coater.

SCOTI · 02-22-2021, 10:28 AM

Nice. Still waiting on my cover

forestb · 02-22-2021, 12:03 PM

Quote:

Originally Posted by The Rocknrod

Got my tans pan and TC cover back from the powder coater.

What happened to all of the finned polished stuff that you had earlier?

**The Rocknrod** · 02-22-2021, 01:31 PM

Quote:

Originally Posted by forestb

What happened to all of the finned polished stuff that you had earlier?

I lost interest.

**caseyjones** · 02-23-2021, 02:36 AM

Man, that looks so good!

**The Rocknrod** · 02-25-2021, 10:07 AM

Still a long way to go but it's moving in the right direction.

88Stanger · 02-25-2021, 10:33 AM

Quote:

Originally Posted by The Rocknrod

Still a long way to go but it's moving in the right direction.

Yes it is!!!

SCOTI · 02-25-2021, 10:36 AM

Bling bling. That compartment looks clean.

roll_the_dice · 02-25-2021, 10:57 AM

SCOTI took the words out of my mouth...looks clean! Well played sir!

**Joe Pass** · 02-25-2021, 09:53 PM

Great work.....

**The Rocknrod** · 02-26-2021, 09:15 AM

Thank you gentlemen.
This morning I checked the pinion angle at ride height and I'm .7% between the two. Whew what a stroke of luck that was.

**The Rocknrod** · 02-28-2021, 12:10 AM

Got more of the front end done today, worked on the headlights relays and wiring, just have to finish the trans cooler tubing when that comes in. Seems like everyone is using the bad weather excuse on shipping.
My hood hinges are woefully weak, so I'll have to replace those.

aggie91 · 03-08-2021, 02:56 PM

Quote:

Originally Posted by The Rocknrod

Got more of the front end done today, worked on the headlights relays and wiring, just have to finish the trans cooler tubing when that comes in. Seems like everyone is using the bad weather excuse on shipping.
My hood hinges are woefully weak, so I'll have to replace those.

That and COVID. I just got an update from Brother's Trucks that my order I placed is now being shipped. I had for got I order anything from them so I got on and looked. I placed the order May, 19, 2020!

**The Rocknrod** · 03-08-2021, 03:33 PM

Quote:

Originally Posted by aggie91

That and COVID. I just got an update from Brother's Trucks that my order I placed is now being shipped. I had for got I order anything from them so I got on and looked. I placed the order May, 19, 2020!

Wow. I'd a canceled that long ago.

aggie91 · 03-10-2021, 02:14 PM

Quote:

Originally Posted by The Rocknrod

Wow. I'd a canceled that long ago.

I had for got all about it. Lucky for me no body else had the part in stock, so I never actually ordered it from another source. Now its on its way and I can finish that part of my build...

**cwcarpenter98** · 02-28-2021, 10:17 AM

I ran into the shipping thing too. My package took 10 days to get from California to Atlanta. Says it will be delivered tomorrow.

Your truck looks like it's almost ready to hit the road again

**The Rocknrod** · 02-28-2021, 02:43 PM

Well if I can get the firewall insulated on the p-side I can install the heat/AC unit and run the heat/ac hoses and plug it in electrically. Install the drive shaft, get a battery, term those cables, fill it with all the oils/fluids... Yep maybe I could at least start it.
But I bought another set of headers so I have to change those out first.
After I start it I can get to the glass shop, then the muffler shop, Get tires and wheels, then the upholsterer in Houston. Get it inspected, go the county to register it...

Oh, I forgot to buy the wood, get it and finish it and install it.

02-12-2021, 04:10 PM	#1
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got the trans dust cover pan in today. There was an ear on the starter side that needed to be flattened down, not sure why it was there. One of the holes elongated when installing. Not a perfect piece but then again, there is nothing else out there for the 200-4R. Off to the powder coater it went with the PML Trans Pan. So the Oil Pan Dust Cover and Trans Pan will match. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-13-2021, 08:51 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got the distributor ends of the plug wires terminated. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-14-2021, 04:18 PM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project More work today, still working on the details but you get the idea. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-14-2021, 05:05 PM	#6
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,483	Re: New 64 Stepper Project Dadgum, that's shiny __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

02-16-2021, 02:04 PM	#7
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,079	Re: New 64 Stepper Project NICE. It's looking real good. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

02-19-2021, 04:18 PM	#8
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project We were without internet in my area for a few days, but I worked some on it. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-22-2021, 10:17 AM	#9
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got my tans pan and TC cover back from the powder coater. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-22-2021, 10:28 AM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,027	Re: New 64 Stepper Project Nice. Still waiting on my cover __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-23-2021, 02:36 AM	#13
caseyjones Senior Member Join Date: Nov 2013 Location: Portland, OR Posts: 542	Re: New 64 Stepper Project Man, that looks so good! __________________ 1955 Long Distance Build 1964 GMC Palomino Tan Survivor 1964 C10 Survivor - Sold

02-25-2021, 10:07 AM	#14
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Still a long way to go but it's moving in the right direction. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-25-2021, 10:36 AM	#16
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,027	Re: New 64 Stepper Project Bling bling. That compartment looks clean. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-25-2021, 10:57 AM	#17
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: New 64 Stepper Project SCOTI took the words out of my mouth...looks clean! Well played sir! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

02-25-2021, 09:53 PM	#18
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Great work..... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

02-26-2021, 09:15 AM	#19
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Thank you gentlemen. This morning I checked the pinion angle at ride height and I'm .7% between the two. Whew what a stroke of luck that was. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-28-2021, 12:10 AM	#20
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got more of the front end done today, worked on the headlights relays and wiring, just have to finish the trans cooler tubing when that comes in. Seems like everyone is using the bad weather excuse on shipping. My hood hinges are woefully weak, so I'll have to replace those. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

02-28-2021, 10:17 AM	#24
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,483	Re: New 64 Stepper Project I ran into the shipping thing too. My package took 10 days to get from California to Atlanta. Says it will be delivered tomorrow. Your truck looks like it's almost ready to hit the road again __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

02-28-2021, 02:43 PM	#25
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Well if I can get the firewall insulated on the p-side I can install the heat/AC unit and run the heat/ac hoses and plug it in electrically. Install the drive shaft, get a battery, term those cables, fill it with all the oils/fluids... Yep maybe I could at least start it. But I bought another set of headers so I have to change those out first. After I start it I can get to the glass shop, then the muffler shop, Get tires and wheels, then the upholsterer in Houston. Get it inspected, go the county to register it... Oh, I forgot to buy the wood, get it and finish it and install it. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 02-28-2021 at 03:04 PM.

Register or Log In To remove these advertisements.